The welding fume has significant effects on the weld workers＇ health. In order to overwhelm the shortcomings of the control measures of the welding fume, the research of the purifying of welding fume on the spot was ...The welding fume has significant effects on the weld workers＇ health. In order to overwhelm the shortcomings of the control measures of the welding fume, the research of the purifying of welding fume on the spot was carried out. The purifying device was designed. The relationship between the corona discharge voltage and the purifying efficiency was investigated through experiments with different needle electrode numbers, different ring electrode numbers and different needle-plate distances. The results show that 5-needle double-ring electrode has the best efficiency; the purifying efficiency is increase with the lessening of the needle-plate distance and the increase of the discharge voltage. Using 5-needle double-ring electrode, the purifying efficiency reaches its maximum value 97.9% while the needle-plate distance is 6 cm, the discharge voltage is -35 kV. The purifying device has an excellent purifying effect on the welding fume.展开更多
The oxidation of Hg^0 by Pulse Corona Induced Plasma Chemical Process （PPCP） was investigated through changing discharge voltage, pulse frequency and gas compositions. Experimental results indicate that active radic...The oxidation of Hg^0 by Pulse Corona Induced Plasma Chemical Process （PPCP） was investigated through changing discharge voltage, pulse frequency and gas compositions. Experimental results indicate that active radicals including O, O3 and OH can contribute to the oxidation of elemental mercury. 10 kV is the onset voltage, and the higher voltage the better removal efficiency. While with the increase of pulse frequency, the Hg^0 concentration falls rapidly at first but then rises rapidly. The best oxidation condition is at 12 kV and 600-800 PPS. Adding O2 can significantly promote oxidation. With NO and SO2 existed, there is an inhibition of mercury oxidation, and NO has a greater influence. Addition of HCl can promote oxidation slightly but affect the initial concentration of mercury significantly. Little moisture content can promote oxidation, while too much H2O can not only resist the oxidation, but also affect the initial concentration of mercury. The mercury oxidation rate can increase to 97.95% at 12 kV/800 PPS with the system of 10% 02/3% H2O/50 ppm HCI. However, mercury oxidation efficiency can reduce down to 20% with 100 ppm NO added.展开更多
文摘The welding fume has significant effects on the weld workers＇ health. In order to overwhelm the shortcomings of the control measures of the welding fume, the research of the purifying of welding fume on the spot was carried out. The purifying device was designed. The relationship between the corona discharge voltage and the purifying efficiency was investigated through experiments with different needle electrode numbers, different ring electrode numbers and different needle-plate distances. The results show that 5-needle double-ring electrode has the best efficiency; the purifying efficiency is increase with the lessening of the needle-plate distance and the increase of the discharge voltage. Using 5-needle double-ring electrode, the purifying efficiency reaches its maximum value 97.9% while the needle-plate distance is 6 cm, the discharge voltage is -35 kV. The purifying device has an excellent purifying effect on the welding fume.
文摘The oxidation of Hg^0 by Pulse Corona Induced Plasma Chemical Process （PPCP） was investigated through changing discharge voltage, pulse frequency and gas compositions. Experimental results indicate that active radicals including O, O3 and OH can contribute to the oxidation of elemental mercury. 10 kV is the onset voltage, and the higher voltage the better removal efficiency. While with the increase of pulse frequency, the Hg^0 concentration falls rapidly at first but then rises rapidly. The best oxidation condition is at 12 kV and 600-800 PPS. Adding O2 can significantly promote oxidation. With NO and SO2 existed, there is an inhibition of mercury oxidation, and NO has a greater influence. Addition of HCl can promote oxidation slightly but affect the initial concentration of mercury significantly. Little moisture content can promote oxidation, while too much H2O can not only resist the oxidation, but also affect the initial concentration of mercury. The mercury oxidation rate can increase to 97.95% at 12 kV/800 PPS with the system of 10% 02/3% H2O/50 ppm HCI. However, mercury oxidation efficiency can reduce down to 20% with 100 ppm NO added.
