碳纤维内导体系全固态晶体膜电极的研究

溶液接触型氟电极存在技术要求高，装配麻烦和使用不便等缺点，因此，研制装配简便、性能好的全固态氟电极一直是分析工作者努力的方向．文献[3]中曾以真空镀膜术装配全固态氟电极．仍较复杂、困难，且镀层又易脱落，因而未能投入生产．现试用碳纤维内导体系装置全固态氟电极和Ag2S电极，经测试表明性能较好．

四苯硼酸钠电位滴定法测有机硫

Selig用氧瓶分解有机硫化合物,生成的硫酸根用高氯酸铅作电位滴定,惜硫酸铅的溶解度较大,且F^-、Cl^-共存时干扰测定。Levins使聚乙二醇(PEG)及其衍生物与钡生成(钅羊)离子,以金属银电极作指示电极,用四苯硼酸钠(TPB钠盐)滴定,测定PEG及其衍生物含量。殷学锋等利用此反应在PEG存在下,以TPB电极作指示电极,用TPB钠盐返滴定钡测定镀铬液中的硫酸根。本文试验将此反应用于有机硫的测定,证明TPB液膜电极及硫化银电极均可用作电位滴定指示电极。本文并对不同分子量PEG的选择及其对电位滴定曲线的影响机理等问题作了初步探讨。

OTFT with Bilayer Gate Insulator and Modificative Electrode

An organic thin-film transistor （OTFT） with an OTS/SiO2 bilayer gate insulator and a MoO3/AI electrode configuration between gate insulator and source/drain electrodes has been investigated. A thermally grown SiO2 layer is used as the OTFT gate dielectric and copper phthalocyanine（CuPc） is used as an active layer. This OTS/SiO2 bilayer gate insulator configuration increases the field-effect mobility, reduces the threshold voltage, and improves the on/off ratio simultaneously. The device with a MoO3/Al electrode has shown similar Ids compared to the device with an Au electrode at the same gate voltage. Our results indicate that using a double-layer of electrodes and a double-layer of insulators is an effective way to improve OTFT performance.