Completeness of bounded model checking temporal logic of knowledge

In order to find the completeness threshold which offers a practical method of making bounded model checking complete, the over-approximation for the complete threshold is presented. First, a linear logic of knowledge is introduced into the past tense operator, and then a new temporal epistemic logic LTLKP is obtained, so that LTLKP can naturally and precisely describe the system＇s reliability. Secondly, a set of prior algorithms are designed to calculate the maximal reachable depth and the length of the longest of loop free paths in the structure based on the graph structure theory. Finally, some theorems are proposed to show how to approximate the complete threshold with the diameter and recurrence diameter. The proposed work resolves the completeness threshold problem so that the completeness of bounded model checking can be guaranteed.

Modeling Thermodynamics of Smart Cut Process

A thermodynamic model of hydrogen induced silicon surface layer splitting with the help of an oxidized silicon wafer bonded is proposed.Wafer splitting is the result of lateral growth of hydrogen blisters in the entire implanted hydrogen region during annealing.The blister growth rate depends on the effective activation energies of both hydrogen complex dissociation and hydrogen diffusion.The hydrogen blister radius was studied as the function of annealing time,annealing temperature and implantation dose.The critical radius was obtained according to the Griffith energy condition.The time required for wafer splitting at the cut temperature was calculated in accordance with the growth of hydrogen blisters.

Real-time Threshold Routing Algorithm Based on Wireless Sensor Network

[Objective] This study was to design an intelligent greenhouse real-time monitoring system based on the core technology of Internet of Things in order to meet the needs of agricultural informatization and intellectualization. [Method] Based on the application characteristics of Wireless Sensor Network （WSN）, the intelligent greenhouse monitoring system was designed. And for the incompleteness strategy of load balancing in the Low-Energy Adaptive Clustering Hierarchy （LEACH）, a Real- time Threshold Routing Algorithm （RTRA） was proposed. [Result] The performance of network lifetime and network delay of RTRA were tested in MATLAB and found that, within the same testing environment, RTRA can save nodes energy consumption, prolong network lifetime, and had better real-time performance than LEACH. The al- gorithm satisfies the crops＇ requirements on real-time and energy efficiency in the greenhouse system. [Conclusion] For the good performance on real-time, the de- signed intelligent greenhouse real-time monitoring system laid the foundation for the research and development of agricultural informatization and intellectualization.

AN INTELLIGENT METHOD FOR REAL-TIME DETECTION OF DDOS ATTACK BASED ON FUZZY LOGIC

The paper puts forward a variance-time plots method based on slide-window mechanism tocalculate the Hurst parameter to detect Distribute Denial of Service(DDoS)attack in real time.Basedon fuzzy logic technology that can adjust itself dynamically under the fuzzy rules,an intelligent DDoSjudgment mechanism is designed.This new method calculates the Hurst parameter quickly and detectsDDoS attack in real time.Through comparing the detecting technologies based on statistics andfeature-packet respectively under different experiments,it is found that the new method can identifythe change of the Hurst parameter resulting from DDoS attack traffic with different intensities,andintelligently judge DDoS attack self-adaptively in real time.

A novel sparse filtering approach based on time-frequency feature extraction and softmax regression for intelligent fault diagnosis under different speeds

Modern agricultural mechanization has put forward higher requirements for the intelligent defect diagnosis.However,the fault features are usually learned and classified under all speeds without considering the effects of speed fluctuation.To overcome this deficiency,a novel intelligent defect detection framework based on time-frequency transformation is presented in this work.In the framework,the samples under one speed are employed for training sparse filtering model,and the remaining samples under different speeds are adopted for testing the effectiveness.Our proposed approach contains two stages:1)the time-frequency domain signals are acquired from the mechanical raw vibration data by the short time Fourier transform algorithm,and then the defect features are extracted from time-frequency domain signals by sparse filtering algorithm;2)different defect types are classified by the softmax regression using the defect features.The proposed approach can be employed to mine available fault characteristics adaptively and is an effective intelligent method for fault detection of agricultural equipment.The fault detection performances confirm that our approach not only owns strong ability for fault classification under different speeds,but also obtains higher identification accuracy than the other methods.

From Grammar to Critical Thinking in Seven Steps at 2013 KOTESOL DCC Symposium

＂From Grammar to Critical Woosong University, 2013 Thinking in Seven The purpose of the Steps＂ was presented at the 2013 KOTESOL DCC Symposium, project was to accelerate the learning curve of students with a higher than average IQ （intelligence quotient）, but functionally low in English. The students were required to write an essay, in the last hour of a four hour class. The students were challenged to fix sentences, write the reason they chose, and speak their answer. To determine if this was a one book idea, another test was tried with regular students, using an off the shelf grammar book. Using the same step by step process, the ability of students to make a story from a standard grammar book, was accomplished in a 90-minute class. Students enjoyed the activity and were able to use previously learned ideas in their sequencing and logical choices. This in turn strengthened the writing process, which was the goal. After four sessions, students in the initial trial class achieved better writing and story development skills. The second group did not continue the process due to class and schedule changes. Their understanding of the process was enlarged, but not tested

A smartphone-based calibration-free portable urinalysis device

As one of the most common medical diagnosis methods, urinalysis is a highly demanded technique for screening tests or daily monitoring of various diseases. With the rapid development of POC(point-of-care) systems, a convenient house-using urinalysis device is widely needed. However, considering the difference of onboard systems and multiple test indicators in urinalysis, the design of such an intelligent device is still challenging. In this paper, a smartphone-based portable urinalysis system has been developed and applied for the colorimetric analysis of routine urine examination indices using an Android app. By integrating the test paper sensor in the portable device for urinalysis,our system significantly improves the instability of conventional dipstick-based manual colorimetry, and the smartphone application used for color discrimination enhances the accuracy of the visual assessment of sample strips. Using a simple operation approach that takes ~ 2 min per test, our system can be applied as rapid urinalysis for routine check-ups.

Real-time operation guide system for sintering process with artificial intelligence

In order to optimize the sintering process, a real-time operation guide system with artificial intelligence was developed, mainly including the data acquisition online subsystem, the sinter chemical composition controller, the sintering process state controller, and the abnormal conditions diagnosis subsystem. Knowledge base of the sintering process controlling was constructed, and inference engine of the system was established. Sinter chemical compositions were controlled by the strategies of self-adaptive prediction, internal optimization and center on basicity. And the state of sintering was stabilized centering on permeability. In order to meet the needs of process change and make the system clear, the system has learning ability and explanation function. The software of the system was developed in Visual C++ programming language. The application of the system shows that the hitting accuracy of sinter compositions and burning through point prediction are more than 85%; the first-grade rate of sinter chemical composition, stability rate of burning through point and stability rate of sintering process are increased by 3%, 9% and 4%, respectively.

Intelligent Machine Theory--A Key Approach to Initiate the Age of Designing Thinking Computers

The purpose of this paper is to introduce an unknown method for finding a real possible x value of any degree polynomial equation and to show how this can be applied to make computers which are at least x1000 （one thousand times） faster than today＇s existing highest speed computers. Since one of the Milennium Prize Problems offered by Claymath asks about whether P （Deterministic Polynomial） is equal to NP （Non-Deterministic Polynomial） （what that means informally is that whether we can design a computer which can quickly solve a certain complicated problem can also verify the solution quickly （and vice versa）. Fortunately, the answer to P vs. NP problem based on my findings in certain algebraic algorythms is yes although there have been many people who claimed the answer is no. What that means is that humans can make machines that work very fast and close to human intelligence in the identification of, say, certain proteins and amino acids, in case my theory is proven to be a fact. This paper is therefore an initial stage of planting the first seeds of the process, in terms of describing how exactly this can happen, theoretically of course, since everything in Science begins with a theory based on the outcome of a hypothesis.

RobustL_1 model reduction for stochastic time-delay systems

This paper investigates the problem of robust L1 model reduction for continuous-time uncertain stochastic time-delay systems. For a given mean-square stable system, our purpose is to construct reduced-order systems, such that the error system between these two models is mean-square asymptotically stable and has a guaranteed L1 (also called peak-to-peak) performance. The peak-to-peak gain criterion is first established for stochastic time-delay systems, and the corresponding model reduction problem is solved by using projection lemma. Sufficient conditions are obtained for the existence of admissible reduced-order models in terms of linear matrix inequalities (LMIs) plus matrix inverse constraints. Since these obtained conditions are not expressed as strict LMIs, the cone complementarity linearization (CCL) method is exploited to cast them into nonlinear minimization problems subject to LMI constraints, which can be readily solved by standard numerical software. In addition, the development of reduced-order models with special structures, such as the delay-free model, is also presented. The efficiency of the proposed methods is demonstrated via a numerical example.

A Real-Time Power Controller for Grid-Connected Inverters in LV Smart Microgrids

This paper presents a real-time power flow controller for VSIs （voltage source inverters） interfaced to low voltage microgrids. The proposed controller is modular, flexible, intelligent, inexpensive, portable, adaptive and designed to positively contribute in low voltage microgrids in which the lines R/X ratio is greater than the transmission lines. Therefore, the proposed control strategy is developed for operation in distribution lines. The controller strategy is different from the conventional grid-connected inverters which are designed based on transmission line characteristics. This controller, using a Texas Instrument general purpose DSP （digital signal processor）, is programmed and tuned using MATLAB/SIMULINK in order to enhance self-healing, reliability and stability of the grid. This general purpose controller makes proper decisions using its local measurements as the primary source of data. The controller has the capability of communicating with the adjacent controllers and sharing the information if/when needed. The power flow output of the inverter is tested for both islanded and grid-connected modes of operation. The inverter positively contributes to active and reactive power supply while operating in grid-connected mode. The proposed control method has been implemented on a Texas Instrument DSC （digital signal controller） chip and tested on a hardware test bench at the Alternative Energy Laboratory at WVU1T （West Virginia University Institute of Technology）. The system＇s experimental results veri~ the validity and efficiency of the proposed controller.

Containment control for heterogeneous multi-agent systems with time delay via an output regulation approach

This paper presents the containment analysis and design of heterogeneous linear multi-agent systems(MAS)with time-delay under the output regulation.The leaders are treated as exosystems and an modified output regulation error is designed,which can deal with more than one leader in containment control,then the containment problem will be turned into an output regulation problem.A novel analysis framework of the output regulation is proposed to design a dynamic state feedback control law for containment error and distributed observer when the agents cannot receive external system signal,which guarantees the convergence of all follower agents to the dynamic convex hull spanned by the leaders.The system stability for time-delay containment is proved by the output regulation method instead of the Lyapunov method.Finally,a numerical example is given to illustrate the validity of the theoretical results.

Real Time Application of Bearing Wear Prediction Model Using Intelligent Drilling Advisory System

The real-time prediction of bearing wear for roller cone bits using the Intelligent Drilling Advisory system （IDAs） may result in better performance in oil and gas drilling operations and reduce total drilling cost. IDAs is a real time engineering software and being developed for the oil and gas industry to enhance the performance of complex drilling processes providing meaningful analysis of drilling operational data. The prediction of bearing wear for roller cone bits is one of the most important engineering modules included into IDAs to analyze the drilling data in real time environment. The Bearing Wear Prediction module in IDAs uses a newly developed wear model considering drilling parameters such as weight on bit （WOB）, revolution per minute （RPM）, diameter of bit and hours drilled as a function of International Association of Drilling Contractors （IADC） bit bearing wear. The drilling engineers can evaluate bearing wear status including cumulative wear of roller cone bit in real time while drilling, using this intelligent system and make a decision on when to pull out the bit in time to avoid bearing failure. The wear prediction module as well as the intelligent system has been successfully tested and verified with field data from different wells drilled in Western Canada. The estimated cumulative wears from the analysis match close with the corresponding field values.

Research and application of an intelligent recloser controller installed on outdoor rod

A new type of intelligent recolser controller installed on the outdoor rod is developed, which is mainly composed of microcontroller of Intel 87C196KC 20 and CPLD devices. This controller integrates all the functions of measuring, controlling, protection, fault diagnosis, communication, remote controlled operation and self power devices with infra red remote control devices as a unit. The controller applies the distributed structure, field concentration line and intelligent technology to seal up the synthetic servomechanisms such as the microcomputer based protection and measuring devices in the second stage of the mini out door transformer substation, which are distributed on the outdoor circuit switches on the spot and formed as a whole. Therefore, this technology can transform a large number of ordinary homemade SF 6 circuit beaker and vacuum circuit breaker into intelligent circuit recloser, thus replacing the expensive imported automatic circuit recolser.

Design of Automatic Baby Nursing Trolley based on Intelligent Sensing Technology

This paper study and solve the design and manufacture of baby care car, its unique function is the baby carriage can be used as a baby bed, when necessary, it can also become a nursing car, sensor in the vehicle can be real-time detected whether the baby bed wetting and induction time will give parents information feedback; the humidity sensing probe controlled by single chip microcomputer and with the bottle clamp flexible connecting rod, can realize the baby auxiliary nurse; remote wireless commtmication system can allow parents to monitor children＇ s state. The design of intelligent baby carriage, to enhance the technological content of products, promote the innovation of design China bassinet production, has the important practical significance to seize the smart baby car market.

Cooperative output tracking of multi-agent systems under finite time

The cooperative output tracking problem of multi-agent systems in finite time is considered.In order to enable the agents to quickly track and converge to external system within a finite time,a novel distributed output feedback control strategy based on the finite-time state observer is designed.This distributed finite-time observer can not only solve cooperative output tracking problems when the agents can not get external system signal,but also make the systems have a faster convergence and a good robustness.The stability of the system in finite time is proved based on Lyapunov function.Numerical simulations results have been provided to demonstrate the effectiveness of the proposed protocol.

Development of an Intelligent Voltage Control System for Jeju Island Power System in Korea

As the voltage has local characteristics in a power system, system voltage control has depended on human experts in distribution substation local reactive power control station so far in Korea. Since coordinative automatic control has been possible due to the recent advances in computers and communication networks, the hierarchical voltage control system, consisting of primary, secondary, and tertiary control, has been applied in several European countries. Recently the Korea power system has been operated more closely to stability limits because of rapid growth in load-demand as seen in Europe. For this reasons, Korea electric power corporation recognized the need of the voltage control system and developed the voltage control system. This paper presents an intelligent voltage control system for domestic power system using numerical algorithm based on the sensitivity matrix and the expert system. Dynamic characteristics of the developed system are investigated using EMTDC （electromagnetic transient DC analysis program） and RTDS （real time digital simulator）. Several case studies showed the promising performance.

Real-time traffic information extraction based on compressed video with interframe motion vector

Extraction of traffic information from image or video sequence is a hot research topic in intelligenttransportation system and computer vision. A real-time traffic information extraction method based on com-pressed video with interframe motion vectors for speed, density and flow detection, has been proposed for ex-traction of traffic information under fixed camera setting and well-defined environment. The motion vectors arefirst separated from the compressed video streams, and then filtered to eliminate incorrect and noisy vectors u-sing the well-defined environmental knowledge. By applying the projective transform and using the filtered mo-tion vectors, speed can be calculated from motion vector statistics, density can be estimated using the motionvector occupancy, and flow can be detected using the combination of speed and density. The embodiment of aprototype system for sky camera traffic monitoring using the MPEG video has been implemented, and experi-mental results proved the effectiveness of the method proposed.

A Parallel Approach for Real-Time Power Flow in Distribution Networks

The new reality of smart distribution systems with use of generation sources of small and medium sizes brings new challenges for the operation of these systems. The complexity and the large number of nodes requires use of methods which can reduce the processing time of algorithms such as power flow, allowing its use in real time. This paper presents a known methodology for calculating the power flow in three phases using backward/forward sweep method, and also considering other network elements such as voltage regulators, shunt capacitors and sources of dispersed generation of types PV （active power and voltage） and PQ （active and reactive power）. After that, new elements are introduced that allow the parallelization of this algorithm and an adequate distribution of work between the available processors. The algorithm was implemented using a multi-tiered architecture; the processing times were measured in many network configurations and compared with the same algorithm in the serial version.

Prioritizing Alarms in Real-Time： Intelligent Alarms Advanced System

During the operation of complex process, such as oil production or refming, abnormal situations may occur, leading to an alarm flooding. Alarm flooding is the signalling of a large number of alarms in a few minutes, in such a way that it is impossible for the operator to attend to all alarms. On these occasions, it is usual that the operator leaves the alarm summary list and gets an analysis of the plant through the screens of the DCS （digital control system）, seeking to understand the situation. The alarm summary list ceases to be a useful tool. In such cases, the operator might have the aid of a filter that would present the highest priority alarms and other information associated with them, enabling him to gain a better knowledge of the situation. This paper describes the interface of a system aimed to help the operator to have a more comprehensive knowledge of the process （a better situational awareness） during process upsets that cause alarm flooding, recovering the utility of the alarm layer to the safety of industrial processes.