With the rapid development of microelectronics and hardware,the use of ever faster micro processors and new architecture must be continued to meet tomorrow′s computing needs. New processor microarchitectures are need...With the rapid development of microelectronics and hardware,the use of ever faster micro processors and new architecture must be continued to meet tomorrow′s computing needs. New processor microarchitectures are needed to push performance further and to use higher transistor counts effectively.At the same time,aiming at different usages,the processor has been optimized in different aspects,such as high performace,low power consumption,small chip area and high security. SOC (System on chip)and SCMP (Single Chip Multi Processor) constitute the main processor system architecture.展开更多
In Internet of Things(IoT), the devices or terminals are connected with each other, which can be very diverse over the wireless networks. Unfortunately, the current devices are not designed to communicate with the col...In Internet of Things(IoT), the devices or terminals are connected with each other, which can be very diverse over the wireless networks. Unfortunately, the current devices are not designed to communicate with the collocated devices which employ different communication technologies. Consequently, the communication between these devices will be realized only by using the gateway nodes. This will cause the inefficient use of wireless resources. Therefore, in this paper, a smart service system(SSS) architecture is proposed, which consists of smart service terminal(SST), and smart service network(SSN), to realize the Io T in a general environment with diverse communication networks, devices, and services. The proposed architecture has the following advantages: i) the devices in this architecture cover multiple types of terminals and sensor-actuator devices; ii) the communications network therein is a converged network, and will coordinate multiple kinds of existing and emerging networks. This converged network offers ubiquitous access for various sensors and terminals; iii) the architecture has services and applications covering all smart service areas. It also provides theadaptability to new services and applications. A SSS architecture-based smart campus system was developed and deployed. Evaluation experiments of the proposed smart campus system demonstrate the SSS's advantages over the existing counterparts, and verify the effectiveness of the proposed architecture.展开更多
In this paper, the trajectory control of multi-agent dynamical systems with exogenous disturbances is studied. Suppose multiple agents composing of a scale-free network topology, the performance of rejecting disturban...In this paper, the trajectory control of multi-agent dynamical systems with exogenous disturbances is studied. Suppose multiple agents composing of a scale-free network topology, the performance of rejecting disturbances for the low degree node and high degree node is analyzed. Firstly, the consensus of multi-agent systems without disturbances is studied by designing a pinning control strategy on a part of agents, where this pinning control can bring multiple agents＇ states to an expected consensus track. Then, the influence of the disturbances is considered by developing disturbance observers, and disturbance observers based control （DOBC） are developed for disturbances generated by an exogenous system to estimate the disturbances. Asymptotical consensus of the multi-agent systems with disturbances under the composite controller can be achieved for scale-free network topology. Finally, by analyzing examples of multi-agent systems with scale-free network topology and exogenous disturbances, the verities of the results are proved. Under the DOBC with the designed parameters, the trajectory convergence of multi-agent systems is researched by pinning two class of the nodes. We have found that it has more stronger robustness to exogenous disturbances for the high degree node pinned than that of the low degree node pinned.展开更多
This paper analyses the demand of intelligent bookshelf system, designed the overall structure of intelligent Library shelves system based on RFID and create the system use case model. The analysis and design of the i...This paper analyses the demand of intelligent bookshelf system, designed the overall structure of intelligent Library shelves system based on RFID and create the system use case model. The analysis and design of the intelligent bookshelf system structure from two aspects of hardware and software, puts forward the three layer system structure model of intelligent bookshelf system based on RFID technology. The paper provide the analysis method and the design ideas of library intelligent bookshelf system, has the very high application value, contribute to the realization of library intelligent management and improve the level of library services, provide a useful reference to the development of current book positioning system and intelligent goods shelf system solution.展开更多
Lightweight ubiquitous computing security architecture was presented. Lots of our recent researches have been integrated in this architecture. And the main current researches in the related area have also been absorbe...Lightweight ubiquitous computing security architecture was presented. Lots of our recent researches have been integrated in this architecture. And the main current researches in the related area have also been absorbed. The main attention of this paper was providing a compact and realizable method to apply ubiquitous computing into our daily lives under sufficient secure guarantee. At last,the personal intelligent assistant system was presented to show that this architecture was a suitable and realizable security mechanism in solving the ubiquitous computing problems.展开更多
Developing materials with excellent properties has been the untiring pursuit of mankind.Metallic glasses(MGs)would be the ideal metallic materials if their size could be scaled up to be comparable to traditional metal...Developing materials with excellent properties has been the untiring pursuit of mankind.Metallic glasses(MGs)would be the ideal metallic materials if their size could be scaled up to be comparable to traditional metals.To address this challenge,a variety of approaches have been attempted over the past decades,including thermodynamicsbased alloy,3D printing and the recent artificial intelligenceguided optimal alloy.In this study,a facile and flexible route was demonstrated to manufacture giant MGs(GMGs)with diameters more than 100 mm through the thermo-joining process.The jointed GMG samples feature almost the same performance as the as-cast ones.The ability of manufacturing complex 3D components such as the Chinese Zodiacs was also demonstrated.Our approach might overcome the longstanding problem of glass forming ability(GFA)limitations in alloy systems and pave new concept and route to fabricate size unlimited MGs.展开更多
Containment control of first-order multi-agent systems with uncertain topologies and communication timedelays is studied. Suppose system topologies are dynamically changed, a containment control algorithm with time-va...Containment control of first-order multi-agent systems with uncertain topologies and communication timedelays is studied. Suppose system topologies are dynamically changed, a containment control algorithm with time-varying delays is presented. The stability of the control algorithm is studied under the assumption that communication topologies are jointly-connected, and constraint condition of distributed containment control for delayed multi-agent systems is derived with the aid of Lyapunov–Krasovskii function. Simulation results are provided to prove the correctness and effectiveness of the conclusion.展开更多
Solder bump technology has been widely used in electronic packaging. With the development of solder bumps towards higher density and finer pitch, it is more difficult to inspect the defects of solder bumps as they are...Solder bump technology has been widely used in electronic packaging. With the development of solder bumps towards higher density and finer pitch, it is more difficult to inspect the defects of solder bumps as they are hidden in the package. A nondestructive method using the transient active thermography has been proposed to inspect the defects of a solder bump, and we aim at developing an intelligent diagnosis system to eliminate the influence of emissivity unevenness and non-uniform heating on defects recognition in active infrared testing. An improved fuzzy c-means(FCM) algorithm based on the entropy weights is investigated in this paper. The captured thermograms are preprocessed to enhance the thermal contrast between the defective and good bumps. Hot spots corresponding to 16 solder bumps are segmented from the thermal images. The statistical features are calculated and selected appropriately to characterize the status of solder bumps in FCM clustering. The missing bump is identified in the FCM result, which is also validated by the principle component analysis. The intelligent diagnosis system using FCM algorithm with the entropy weights is effective for defects recognition in electronic packages.展开更多
Communication bandwidth and network topology are two important factors that affect performance of distributed consensus in multi-agent systems.The available works about quantized average consensus assume that the adja...Communication bandwidth and network topology are two important factors that affect performance of distributed consensus in multi-agent systems.The available works about quantized average consensus assume that the adjacency matrices associated with the digraphs are doubly stochastic,which amounts to that the digital networks are balanced.However,this assumption may be unrealistic in practice.In this paper,without assuming double stochasticity,the authors revisit an existing quantized average consensus protocol with the logarithmic quantization scheme,and investigate the quantized consensus problem in general directed digital networks that are strongly connected but not necessarily balanced.The authors first derive an achievable upper bound of the quantization precision parameter to design suitable logarithmic quantizer,and this bound explicitly depends on network topology.Subsequently,by means of the matrix transformation and the Lyapunov techniques,the authors provide a testable condition under which the weighted average consensus can be achieved with the proposed quantized protocol.展开更多
文摘With the rapid development of microelectronics and hardware,the use of ever faster micro processors and new architecture must be continued to meet tomorrow′s computing needs. New processor microarchitectures are needed to push performance further and to use higher transistor counts effectively.At the same time,aiming at different usages,the processor has been optimized in different aspects,such as high performace,low power consumption,small chip area and high security. SOC (System on chip)and SCMP (Single Chip Multi Processor) constitute the main processor system architecture.
基金supported by the national 973 project of China under Grants 2013CB329104the Natural Science Foundation of China under Grants 61372124, 61427801+1 种基金the Natural Science Foundation of the Jiangsu Higher Education Institutions (Grant No.13KJB520029)the Jiangsu Province colleges and universities graduate students scientific research and innovation program CXZZ13_0477,NUPTSF(Grant No.NY214033)
文摘In Internet of Things(IoT), the devices or terminals are connected with each other, which can be very diverse over the wireless networks. Unfortunately, the current devices are not designed to communicate with the collocated devices which employ different communication technologies. Consequently, the communication between these devices will be realized only by using the gateway nodes. This will cause the inefficient use of wireless resources. Therefore, in this paper, a smart service system(SSS) architecture is proposed, which consists of smart service terminal(SST), and smart service network(SSN), to realize the Io T in a general environment with diverse communication networks, devices, and services. The proposed architecture has the following advantages: i) the devices in this architecture cover multiple types of terminals and sensor-actuator devices; ii) the communications network therein is a converged network, and will coordinate multiple kinds of existing and emerging networks. This converged network offers ubiquitous access for various sensors and terminals; iii) the architecture has services and applications covering all smart service areas. It also provides theadaptability to new services and applications. A SSS architecture-based smart campus system was developed and deployed. Evaluation experiments of the proposed smart campus system demonstrate the SSS's advantages over the existing counterparts, and verify the effectiveness of the proposed architecture.
基金Supported by the National Natural Science Foundation of China under Grant Nos.60774016,60875039,60904022the Science Foundation of Education Office of Shandong Province of China under Grant No.J08LJ01Internal Visiting Scholar Object for Excellence Youth Teacher of the College of Shandong Province of China
文摘In this paper, the trajectory control of multi-agent dynamical systems with exogenous disturbances is studied. Suppose multiple agents composing of a scale-free network topology, the performance of rejecting disturbances for the low degree node and high degree node is analyzed. Firstly, the consensus of multi-agent systems without disturbances is studied by designing a pinning control strategy on a part of agents, where this pinning control can bring multiple agents＇ states to an expected consensus track. Then, the influence of the disturbances is considered by developing disturbance observers, and disturbance observers based control （DOBC） are developed for disturbances generated by an exogenous system to estimate the disturbances. Asymptotical consensus of the multi-agent systems with disturbances under the composite controller can be achieved for scale-free network topology. Finally, by analyzing examples of multi-agent systems with scale-free network topology and exogenous disturbances, the verities of the results are proved. Under the DOBC with the designed parameters, the trajectory convergence of multi-agent systems is researched by pinning two class of the nodes. We have found that it has more stronger robustness to exogenous disturbances for the high degree node pinned than that of the low degree node pinned.
文摘This paper analyses the demand of intelligent bookshelf system, designed the overall structure of intelligent Library shelves system based on RFID and create the system use case model. The analysis and design of the intelligent bookshelf system structure from two aspects of hardware and software, puts forward the three layer system structure model of intelligent bookshelf system based on RFID technology. The paper provide the analysis method and the design ideas of library intelligent bookshelf system, has the very high application value, contribute to the realization of library intelligent management and improve the level of library services, provide a useful reference to the development of current book positioning system and intelligent goods shelf system solution.
基金Key Project of Chinese Ministry of Education (No.104086)
文摘Lightweight ubiquitous computing security architecture was presented. Lots of our recent researches have been integrated in this architecture. And the main current researches in the related area have also been absorbed. The main attention of this paper was providing a compact and realizable method to apply ubiquitous computing into our daily lives under sufficient secure guarantee. At last,the personal intelligent assistant system was presented to show that this architecture was a suitable and realizable security mechanism in solving the ubiquitous computing problems.
基金the Key Basic and Applied Research Program of Guangdong ProvinceChina(2019B030302010)+2 种基金the National Natural Science Foundation of China(51871157)the Science and Technology Innovation Commission of Shenzhen(JCYJ20170412111216258)the National Key Research and Development Program of China(2018YFA0703605)。
文摘Developing materials with excellent properties has been the untiring pursuit of mankind.Metallic glasses(MGs)would be the ideal metallic materials if their size could be scaled up to be comparable to traditional metals.To address this challenge,a variety of approaches have been attempted over the past decades,including thermodynamicsbased alloy,3D printing and the recent artificial intelligenceguided optimal alloy.In this study,a facile and flexible route was demonstrated to manufacture giant MGs(GMGs)with diameters more than 100 mm through the thermo-joining process.The jointed GMG samples feature almost the same performance as the as-cast ones.The ability of manufacturing complex 3D components such as the Chinese Zodiacs was also demonstrated.Our approach might overcome the longstanding problem of glass forming ability(GFA)limitations in alloy systems and pave new concept and route to fabricate size unlimited MGs.
基金Supported by the National Natural Science Foundation of China under Grant Nos.61273152,61304052,51407088the Science Foundation of Education Office of Shandong Province of China under Grant Nos.ZR2011FM07,BS2015DX018
文摘Containment control of first-order multi-agent systems with uncertain topologies and communication timedelays is studied. Suppose system topologies are dynamically changed, a containment control algorithm with time-varying delays is presented. The stability of the control algorithm is studied under the assumption that communication topologies are jointly-connected, and constraint condition of distributed containment control for delayed multi-agent systems is derived with the aid of Lyapunov–Krasovskii function. Simulation results are provided to prove the correctness and effectiveness of the conclusion.
基金supported by the National Natural Science Foundation of China(Grant Nos.51305179&51305177)the Natural Science Foundation of Jiangsu Higher Education Institutions(Grant No.13KJB510009)
文摘Solder bump technology has been widely used in electronic packaging. With the development of solder bumps towards higher density and finer pitch, it is more difficult to inspect the defects of solder bumps as they are hidden in the package. A nondestructive method using the transient active thermography has been proposed to inspect the defects of a solder bump, and we aim at developing an intelligent diagnosis system to eliminate the influence of emissivity unevenness and non-uniform heating on defects recognition in active infrared testing. An improved fuzzy c-means(FCM) algorithm based on the entropy weights is investigated in this paper. The captured thermograms are preprocessed to enhance the thermal contrast between the defective and good bumps. Hot spots corresponding to 16 solder bumps are segmented from the thermal images. The statistical features are calculated and selected appropriately to characterize the status of solder bumps in FCM clustering. The missing bump is identified in the FCM result, which is also validated by the principle component analysis. The intelligent diagnosis system using FCM algorithm with the entropy weights is effective for defects recognition in electronic packages.
基金supported by the Major State Basic Research Development Program of China(973 Program)under Grant No.2010CB731400the Natural Science Foundation of China under Grant Nos.61074125,61073102,61170059,61170172,61272153Anhui Provincial Natural Science Foundation under Grant No.090412251
文摘Communication bandwidth and network topology are two important factors that affect performance of distributed consensus in multi-agent systems.The available works about quantized average consensus assume that the adjacency matrices associated with the digraphs are doubly stochastic,which amounts to that the digital networks are balanced.However,this assumption may be unrealistic in practice.In this paper,without assuming double stochasticity,the authors revisit an existing quantized average consensus protocol with the logarithmic quantization scheme,and investigate the quantized consensus problem in general directed digital networks that are strongly connected but not necessarily balanced.The authors first derive an achievable upper bound of the quantization precision parameter to design suitable logarithmic quantizer,and this bound explicitly depends on network topology.Subsequently,by means of the matrix transformation and the Lyapunov techniques,the authors provide a testable condition under which the weighted average consensus can be achieved with the proposed quantized protocol.
