As the competition from companies in low cost countries increases,the need for more automated production which reduces labour cost while improving product quality is required.A new rotary compression bending set-up wi...As the competition from companies in low cost countries increases,the need for more automated production which reduces labour cost while improving product quality is required.A new rotary compression bending set-up with automated closed-loop feedback control is thus being developed.By transferring in-process measurement data into an algorithm for predicting springback and bend angle prior to the unloading sequence,the dimensional accuracy is improved.This work focuses on the development of this steering model.Since the method used does not increase cycle time,it is attractive for high-volume industrial applications.More than 150 bending tests of AA6060 extrusions were conducted to determine the capability of the technology.The results show that by activating the automated closed-loop feedback system,the dimensional accuracy of the bent parts is more than three times better than that obtained by traditional compression bending.Since the steering model permits the direct use of additional process data,such as instant wall thickness and cross sectional distortions,it is believed that extension of the measurement capabilities would improve the accuracy of the methodology even further.展开更多
The size of bubbles created in the flotation process is of great importance to the efficiency of the mineral separation achieved.Meanwhile,it is believed that frother transport between phases is perhaps the most impor...The size of bubbles created in the flotation process is of great importance to the efficiency of the mineral separation achieved.Meanwhile,it is believed that frother transport between phases is perhaps the most important reason for the interactive nature of the phenomena occurring in the bulk and froth phases in flotation,as frother adsorbed in the surface of rising bubbles is removed from the bulk phase and then released into the froth as a fraction of the bubbles burst.This causes the increased concentration in the froth compared to the bulk concentration,named as frother partitioning.Partitioning reflects the adsorption of frother on bubbles and how to influence bubble size is not known.There currently exists no such a topic aiming to link these two key parameters.To fill this vacancy,the correspondence between bubble size and frother partitioning was examined.Bubble size was measured by sampling-for-imaging(SFI)technique.Using total organic carbon(TOC)analysis to measure the frother partitioning between froth and bulk phases was determined.Measurements have shown,with no exceptions including four different frothers,higher frother concentration is in the bulk than in the froth.The results also show strong partitioning giving an increase in bubble size which implies there is a compelling relationship between these two,represented by CFroth/CBulk and D32.The CFroth/CBulkand D32 curves show similar exponential decay relationships as a function of added frother in the system,strongly suggesting that the frother concentration gradient between the bulk solution and the bubble interface is the driving force contributing to bubble size reduction.展开更多
Three kinds of methods for processing the data of the multi-wavelength pyrometer are presented in this paper and are named curve auto-search method, curve auto-regression method and neural network method. Tbe experime...Three kinds of methods for processing the data of the multi-wavelength pyrometer are presented in this paper and are named curve auto-search method, curve auto-regression method and neural network method. Tbe experimental results indicate that the calculated temperature and the spectral emissivity compared with the true target temperature and spectral emissivity have significant deviation using the curve auto-search and the curve auto-regression methods. However, the calculated temperature and the spectral emissivity with higher accuracy can be obtained using the neural network method.展开更多
Let φ be a normal function on [0,1) and A'(φ)(1<P<∞) Bergman space on the unit disk, weighted with φ~P(|·|)/(1-|·|~2).A sufficient condition for interpolation by functions in A^P(φ) is obtaine...Let φ be a normal function on [0,1) and A'(φ)(1<P<∞) Bergman space on the unit disk, weighted with φ~P(|·|)/(1-|·|~2).A sufficient condition for interpolation by functions in A^P(φ) is obtained by controlling norms of linear operators.展开更多
This paper deals with the influence of phase modulated synthetic jet on the aerodynamics of the hump in a closed test section Of the Eiffel-type wind tunnel. Three experimental methods of measurement techniques of thi...This paper deals with the influence of phase modulated synthetic jet on the aerodynamics of the hump in a closed test section Of the Eiffel-type wind tunnel. Three experimental methods of measurement techniques of this phenomenon were used： the pressure profile using the Kiel total pressure probe, the velocity profile using the CTA （constant temperature anemometry） probe and the visualization of the flow field using the hot film and the thermo camera, The experimental results with and without the influence of the synthetic jet were compared, as well the impact of the phase shift of the neighbouring synthetic jets. As a reference case, the flow around the hump without the influence of the synthetic jet was selected. The results of the measurement are presented in figures and compared.展开更多
In this paper, the authors construct a class of unitary invariant strongly pseudoconvex complex Finsler metrics which are of the form F =√[ rf(s- t)[, where r = ||v||~ 2, s =| z,v |~2/r, t =|| z||~ 2, f(w) is a real-...In this paper, the authors construct a class of unitary invariant strongly pseudoconvex complex Finsler metrics which are of the form F =√[ rf(s- t)[, where r = ||v||~ 2, s =| z,v |~2/r, t =|| z||~ 2, f(w) is a real-valued smooth positive function of w ∈ R,and z is in a unitary invariant domain M C^n. Complex Finsler metrics of this form are unitary invariant. We prove that F is a class of weakly complex Berwald metrics whose holomorphic curvature and Ricci scalar curvature vanish identically and are independent of the choice of the function f. Under initial value conditions on f and its derivative f, we prove that all the real geodesics of F =√[rf(s- t)] on every Euclidean sphere S^(2n-1) M are great circles.展开更多
A simple and compact fiber bending sensor based on the Maeh-Zehnder interferometer was proposed. A photonic crystal fiber （PCF） with a length of 10mm was spliced by collapsing air holes with two conventional single ...A simple and compact fiber bending sensor based on the Maeh-Zehnder interferometer was proposed. A photonic crystal fiber （PCF） with a length of 10mm was spliced by collapsing air holes with two conventional single mode fibers to consist of an all fiber bending sensor. The sensitivity of 0.53nm/m-1 was obtained at 1586nm for the curvature range from 0 to 8.514 m-1. The temperature sensitivity was very low. The measurement error due to the temperature effect was about 8.68x10-3 m-1/℃, and the temperature effect in the curvature measurement could be ignored. This device can avoid the cross sensitivity of the temperature in the curvature measurement.展开更多
文摘As the competition from companies in low cost countries increases,the need for more automated production which reduces labour cost while improving product quality is required.A new rotary compression bending set-up with automated closed-loop feedback control is thus being developed.By transferring in-process measurement data into an algorithm for predicting springback and bend angle prior to the unloading sequence,the dimensional accuracy is improved.This work focuses on the development of this steering model.Since the method used does not increase cycle time,it is attractive for high-volume industrial applications.More than 150 bending tests of AA6060 extrusions were conducted to determine the capability of the technology.The results show that by activating the automated closed-loop feedback system,the dimensional accuracy of the bent parts is more than three times better than that obtained by traditional compression bending.Since the steering model permits the direct use of additional process data,such as instant wall thickness and cross sectional distortions,it is believed that extension of the measurement capabilities would improve the accuracy of the methodology even further.
基金Project supported by the Collaborative Research and Development Program of Natural Sciences and Engineering Research Council of Canada
文摘The size of bubbles created in the flotation process is of great importance to the efficiency of the mineral separation achieved.Meanwhile,it is believed that frother transport between phases is perhaps the most important reason for the interactive nature of the phenomena occurring in the bulk and froth phases in flotation,as frother adsorbed in the surface of rising bubbles is removed from the bulk phase and then released into the froth as a fraction of the bubbles burst.This causes the increased concentration in the froth compared to the bulk concentration,named as frother partitioning.Partitioning reflects the adsorption of frother on bubbles and how to influence bubble size is not known.There currently exists no such a topic aiming to link these two key parameters.To fill this vacancy,the correspondence between bubble size and frother partitioning was examined.Bubble size was measured by sampling-for-imaging(SFI)technique.Using total organic carbon(TOC)analysis to measure the frother partitioning between froth and bulk phases was determined.Measurements have shown,with no exceptions including four different frothers,higher frother concentration is in the bulk than in the froth.The results also show strong partitioning giving an increase in bubble size which implies there is a compelling relationship between these two,represented by CFroth/CBulk and D32.The CFroth/CBulkand D32 curves show similar exponential decay relationships as a function of added frother in the system,strongly suggesting that the frother concentration gradient between the bulk solution and the bubble interface is the driving force contributing to bubble size reduction.
基金Sponsored by the National Natural Science Foundation of China(Grant No. 60377037)the Scientific Research Foundation of Harbin Institute of Technol-ogy (Grant No. HIT. 2002. 18)the Spaceflight Support Foundation.
文摘Three kinds of methods for processing the data of the multi-wavelength pyrometer are presented in this paper and are named curve auto-search method, curve auto-regression method and neural network method. Tbe experimental results indicate that the calculated temperature and the spectral emissivity compared with the true target temperature and spectral emissivity have significant deviation using the curve auto-search and the curve auto-regression methods. However, the calculated temperature and the spectral emissivity with higher accuracy can be obtained using the neural network method.
基金Supported by the Doctoral Program Foundation of Institute of Higher Education.
文摘Let φ be a normal function on [0,1) and A'(φ)(1<P<∞) Bergman space on the unit disk, weighted with φ~P(|·|)/(1-|·|~2).A sufficient condition for interpolation by functions in A^P(φ) is obtained by controlling norms of linear operators.
文摘This paper deals with the influence of phase modulated synthetic jet on the aerodynamics of the hump in a closed test section Of the Eiffel-type wind tunnel. Three experimental methods of measurement techniques of this phenomenon were used： the pressure profile using the Kiel total pressure probe, the velocity profile using the CTA （constant temperature anemometry） probe and the visualization of the flow field using the hot film and the thermo camera, The experimental results with and without the influence of the synthetic jet were compared, as well the impact of the phase shift of the neighbouring synthetic jets. As a reference case, the flow around the hump without the influence of the synthetic jet was selected. The results of the measurement are presented in figures and compared.
基金supported by the National Natural Science Foundation of China(Nos.11271304,11171277)the Program for New Century Excellent Talents in University(No.NCET-13-0510)+1 种基金the Fujian Province Natural Science Funds for Distinguished Young Scholars(No.2013J06001)the Scientific Research Foundation for the Returned Overseas Chinese Scholars,State Education Ministry
文摘In this paper, the authors construct a class of unitary invariant strongly pseudoconvex complex Finsler metrics which are of the form F =√[ rf(s- t)[, where r = ||v||~ 2, s =| z,v |~2/r, t =|| z||~ 2, f(w) is a real-valued smooth positive function of w ∈ R,and z is in a unitary invariant domain M C^n. Complex Finsler metrics of this form are unitary invariant. We prove that F is a class of weakly complex Berwald metrics whose holomorphic curvature and Ricci scalar curvature vanish identically and are independent of the choice of the function f. Under initial value conditions on f and its derivative f, we prove that all the real geodesics of F =√[rf(s- t)] on every Euclidean sphere S^(2n-1) M are great circles.
基金This work was supported by the National Natural 1Science Foundation of China （NSFC） under Grants No. 61275125, 61007054, 61308055, National High Technology Research and Development Program of China under Grant No. 2013AA031501 ＆ 2012AA041203, Shenzhen Science and Technology Project （NO. JC201005280473A, JC201104210019A, ZDSY20120612094753264, JCYJ20130326113421781） and Specialized Research Fund for the Doctoral Program of Higher Education （SRFDP, 20124408120004）.Open Access This article is distributed under the terms of the Creative Commons Attribution License which permits any use, distribution, and reproduction in any medium, provided the original author（s） and source are credited.
文摘A simple and compact fiber bending sensor based on the Maeh-Zehnder interferometer was proposed. A photonic crystal fiber （PCF） with a length of 10mm was spliced by collapsing air holes with two conventional single mode fibers to consist of an all fiber bending sensor. The sensitivity of 0.53nm/m-1 was obtained at 1586nm for the curvature range from 0 to 8.514 m-1. The temperature sensitivity was very low. The measurement error due to the temperature effect was about 8.68x10-3 m-1/℃, and the temperature effect in the curvature measurement could be ignored. This device can avoid the cross sensitivity of the temperature in the curvature measurement.
