AIM： To determine the correlation of Adjusted Blood Requirement Index （ABRI） with the 7th day outcome in patients presenting with acute variceal bleeding.METHODS： All patients presenting with acute variceal hemorr...AIM： To determine the correlation of Adjusted Blood Requirement Index （ABRI） with the 7th day outcome in patients presenting with acute variceal bleeding.METHODS： All patients presenting with acute variceal hemorrhage （AVH） were included. Patients with previous band ligation, sclerotherapy, gastrointestinal or hepatic malignancies were excluded. Patients were managed as per standard protocol for AVH with terlipressin and band ligation. ABRI scores were calculated using the formula outcome of alive or expired up to the 7th day after treatment. The correlation between ABRI and mortality was estimated and a receiver operative characteristic （ROC） curve was plotted.RESULTS： A total of 113 patients （76 male; 37 female） were included. On assessment, 18 were in Child＇s Pugh Class A, 82 in Class B and 13 were in Class C. The median number of blood units transfused ± inter-quartile range was 3.0 ± 2.0. The median ± inter-quartile range for ABRI was 1.3 ± 1.1. The ROC curve of ABRI for expiry showed a significantly large area of 0.848 （P 〈 0.0001; 95% CI： 0.75-0.95）. A significant correlation of log transformation of ABRI with an outcome of mortality was present （P 〈 0.0001）.展开更多
Based on the field destructive test of six rock-socketed piles with shallow overburden,three prediction models are used to quantitatively analyze and predict the intact load−displacement curve.The predicted values of ...Based on the field destructive test of six rock-socketed piles with shallow overburden,three prediction models are used to quantitatively analyze and predict the intact load−displacement curve.The predicted values of ultimate uplift capacity were further determined by four methods(displacement controlling method(DCM),reduction coefficient method(RCM),maximum curvature method(MCM),and critical stiffness method(CSM))and compared with the measured value.Through the analysis of the relationship between the change rate of pullout stiffness and displacement,a method used to determine the ultimate uplift capacity via non-intact load−displacement curve was proposed.The results show that the predicted value determined by DCM is more conservative,while the predicted value determined by MCM is larger than the measured value.This suggests that RCM and CSM in engineering applications can be preferentially applied.Moreover,the development law of the change rate of pullout stiffness with displacement agrees well with the attenuation form of power function.The theoretical predicted results of ultimate uplift capacity based on the change rate of pullout stiffness will not be affected by the integrity of the curve.The method is simple and applicable for the piles that are not loaded to failure state,and thus provides new insights into ultimate uplift capacity determination of test piles.展开更多
The aim of the experiment is to analyze and view the distribution of gangue withdifferent particle sizes in mine spoil pile cross section.According to the Dimensionalmethod,'Pi'theorem was employed first to ab...The aim of the experiment is to analyze and view the distribution of gangue withdifferent particle sizes in mine spoil pile cross section.According to the Dimensionalmethod,'Pi'theorem was employed first to abbreviate ten physical and mechanical parametersto three dimensionless groups, and then the similarity criterion and coefficient ofthe experiment were determined and calculated based on particle size distribution curve.The similarity model was designed and constructed to represent the process of the minespoil pile.The profile of the final model shows that the small sized particles mainly composethe upper zone of the mine spoil pile, while the bottom of the pile is dominated bybigger sized particles, and the intermediate section presents a zigzag stripe cross-beddingstructure which is composed by small-medium scale particles and medium-large scaleparticles.Each stripe has two critical angles: one is the angle in which gangue particlescan maintain their stability condition, with approximate range from 24° to 26°; and theother is the angle in which particles can stop gliding downwards, approximately varyingfrom 34° to 36°.展开更多
We quantitatively study magnetic anomalies of reinforcement rods in bored insitu concrete piles for the first time and summarized their magnetic anomaly character. Key factors such as measuring borehole orientation, b...We quantitatively study magnetic anomalies of reinforcement rods in bored insitu concrete piles for the first time and summarized their magnetic anomaly character. Key factors such as measuring borehole orientation, borehole-reinforcement distance, and multiple-section reinforcement rods are discussed which contributes valid and quantitative reference for using the magnetic method to detect reinforcement rods. Through tests with model piles, we confirm the accuracy of theoretical computations and then utilize the law discovered in theoretical computations to explain the characteristics of the actual testing curves. The results show that the Za curves of the reinforcement rod reflect important factors regarding the reinforcement rods, such as rod length, change of reinforcement ratio, length of overlap, and etc. This research perfects the magnetic method for detecting reinforcement rods in bored in-situ concrete piles and the method has great importance for preventing building contractor fraud.展开更多
Accurate physical and chemical properties of adsorbents are required for the efficient design of fixed bed adsorbers. The bed void and particle void are significant physical properties. One of the experimentally deter...Accurate physical and chemical properties of adsorbents are required for the efficient design of fixed bed adsorbers. The bed void and particle void are significant physical properties. One of the experimentally determination technique for the bed void is a breakthrough curve method. In the present paper, experimental conditions for determining the bed void from breakthrough curve were investigated because complex conditions are required. The values of bed void were determined from theoretical elution curve at the point of c/c0 = 0.5 under the condition of negligible amount adsorbed. The bed void value determined from elution curve was clearly affected by particle void and fluid velocity, and regarded as ＂apparent＂ bed void values. For large porosity particles, it was difficult to determine the true bed void value due to the effect of penetration into macro pores. Then, the bed void fraction can be determined safely from breakthrough curve when particles possessing small particle void are used.展开更多
The Voltammetric properties of Pure Prednisolone in a direct method in the aqueous solution were studied. The substance has revealed a clear and major two reduction peaks at potential -1.22 Volt and -1.45 Volt against...The Voltammetric properties of Pure Prednisolone in a direct method in the aqueous solution were studied. The substance has revealed a clear and major two reduction peaks at potential -1.22 Volt and -1.45 Volt against the reference electrode （Ag/AgCI/SatKC1）. The calibration curve of the prednisolone in the Phosphate Buffer （pH = 7） has been studies. The relationship has been linear within the scope of concentration 0.398 × 10 6-3.846 ×10-6 mol. The correlation coefficients are 0.9981, 0.9958 for the first and second peaks. Another two calibration curves were also constructed in the presence of human serum and urine. Standard addition method was successful used to determine the drug in serum, urine as well as in the analysis of drug in the tablet. The molecular binding ofprednisolone with Albumin was also studied at different temperature. The Vant hoff equation is used to calculate the thermodynamic parameters, the results indicate that the （ion-ion） of binding suggested.展开更多
文摘AIM： To determine the correlation of Adjusted Blood Requirement Index （ABRI） with the 7th day outcome in patients presenting with acute variceal bleeding.METHODS： All patients presenting with acute variceal hemorrhage （AVH） were included. Patients with previous band ligation, sclerotherapy, gastrointestinal or hepatic malignancies were excluded. Patients were managed as per standard protocol for AVH with terlipressin and band ligation. ABRI scores were calculated using the formula outcome of alive or expired up to the 7th day after treatment. The correlation between ABRI and mortality was estimated and a receiver operative characteristic （ROC） curve was plotted.RESULTS： A total of 113 patients （76 male; 37 female） were included. On assessment, 18 were in Child＇s Pugh Class A, 82 in Class B and 13 were in Class C. The median number of blood units transfused ± inter-quartile range was 3.0 ± 2.0. The median ± inter-quartile range for ABRI was 1.3 ± 1.1. The ROC curve of ABRI for expiry showed a significantly large area of 0.848 （P 〈 0.0001; 95% CI： 0.75-0.95）. A significant correlation of log transformation of ABRI with an outcome of mortality was present （P 〈 0.0001）.
基金Project(2016YFC0802203)supported by the National Key R&D Program of ChinaProject(2013G001-A-2)supported by the Science and Technology Research and Development Program of China Railway CorporationProject(SKLGDUEK2011)supported by the State Key Laboratory for GeoMechanics and Deep Underground Engineering,China University of Mining&Technology。
文摘Based on the field destructive test of six rock-socketed piles with shallow overburden,three prediction models are used to quantitatively analyze and predict the intact load−displacement curve.The predicted values of ultimate uplift capacity were further determined by four methods(displacement controlling method(DCM),reduction coefficient method(RCM),maximum curvature method(MCM),and critical stiffness method(CSM))and compared with the measured value.Through the analysis of the relationship between the change rate of pullout stiffness and displacement,a method used to determine the ultimate uplift capacity via non-intact load−displacement curve was proposed.The results show that the predicted value determined by DCM is more conservative,while the predicted value determined by MCM is larger than the measured value.This suggests that RCM and CSM in engineering applications can be preferentially applied.Moreover,the development law of the change rate of pullout stiffness with displacement agrees well with the attenuation form of power function.The theoretical predicted results of ultimate uplift capacity based on the change rate of pullout stiffness will not be affected by the integrity of the curve.The method is simple and applicable for the piles that are not loaded to failure state,and thus provides new insights into ultimate uplift capacity determination of test piles.
基金Supported by the National Natural Science Foundation of China(50874102,50974070)
文摘The aim of the experiment is to analyze and view the distribution of gangue withdifferent particle sizes in mine spoil pile cross section.According to the Dimensionalmethod,'Pi'theorem was employed first to abbreviate ten physical and mechanical parametersto three dimensionless groups, and then the similarity criterion and coefficient ofthe experiment were determined and calculated based on particle size distribution curve.The similarity model was designed and constructed to represent the process of the minespoil pile.The profile of the final model shows that the small sized particles mainly composethe upper zone of the mine spoil pile, while the bottom of the pile is dominated bybigger sized particles, and the intermediate section presents a zigzag stripe cross-beddingstructure which is composed by small-medium scale particles and medium-large scaleparticles.Each stripe has two critical angles: one is the angle in which gangue particlescan maintain their stability condition, with approximate range from 24° to 26°; and theother is the angle in which particles can stop gliding downwards, approximately varyingfrom 34° to 36°.
基金supported by Transportation Research Project of Jiangsu Province (05Y015),China
文摘We quantitatively study magnetic anomalies of reinforcement rods in bored insitu concrete piles for the first time and summarized their magnetic anomaly character. Key factors such as measuring borehole orientation, borehole-reinforcement distance, and multiple-section reinforcement rods are discussed which contributes valid and quantitative reference for using the magnetic method to detect reinforcement rods. Through tests with model piles, we confirm the accuracy of theoretical computations and then utilize the law discovered in theoretical computations to explain the characteristics of the actual testing curves. The results show that the Za curves of the reinforcement rod reflect important factors regarding the reinforcement rods, such as rod length, change of reinforcement ratio, length of overlap, and etc. This research perfects the magnetic method for detecting reinforcement rods in bored in-situ concrete piles and the method has great importance for preventing building contractor fraud.
文摘Accurate physical and chemical properties of adsorbents are required for the efficient design of fixed bed adsorbers. The bed void and particle void are significant physical properties. One of the experimentally determination technique for the bed void is a breakthrough curve method. In the present paper, experimental conditions for determining the bed void from breakthrough curve were investigated because complex conditions are required. The values of bed void were determined from theoretical elution curve at the point of c/c0 = 0.5 under the condition of negligible amount adsorbed. The bed void value determined from elution curve was clearly affected by particle void and fluid velocity, and regarded as ＂apparent＂ bed void values. For large porosity particles, it was difficult to determine the true bed void value due to the effect of penetration into macro pores. Then, the bed void fraction can be determined safely from breakthrough curve when particles possessing small particle void are used.
文摘The Voltammetric properties of Pure Prednisolone in a direct method in the aqueous solution were studied. The substance has revealed a clear and major two reduction peaks at potential -1.22 Volt and -1.45 Volt against the reference electrode （Ag/AgCI/SatKC1）. The calibration curve of the prednisolone in the Phosphate Buffer （pH = 7） has been studies. The relationship has been linear within the scope of concentration 0.398 × 10 6-3.846 ×10-6 mol. The correlation coefficients are 0.9981, 0.9958 for the first and second peaks. Another two calibration curves were also constructed in the presence of human serum and urine. Standard addition method was successful used to determine the drug in serum, urine as well as in the analysis of drug in the tablet. The molecular binding ofprednisolone with Albumin was also studied at different temperature. The Vant hoff equation is used to calculate the thermodynamic parameters, the results indicate that the （ion-ion） of binding suggested.
