期刊文献+
共找到8篇文章
< 1 >
每页显示 20 50 100
前置突扩突跌掺气设施曲线阶梯水流掺气特性数值计算 被引量:5
1
作者 李贵吉 张建民 《水利水电科技进展》 CSCD 北大核心 2021年第4期46-52,共7页
采用Realizable k-ε紊流模型和水气两相流Mixture模型对不同流量下前置突扩突跌掺气设施曲线阶梯连接段水流进行了数值模拟,得到了连接段边墙、底板及水流内部掺气量分布规律。结果表明:突扩突跌掺气设施形成的掺气空腔长度和形态与试... 采用Realizable k-ε紊流模型和水气两相流Mixture模型对不同流量下前置突扩突跌掺气设施曲线阶梯连接段水流进行了数值模拟,得到了连接段边墙、底板及水流内部掺气量分布规律。结果表明:突扩突跌掺气设施形成的掺气空腔长度和形态与试验结果吻合,测点处掺气量的计算值大于试验值,但计算值与试验值随流量增大而增大的变化规律基本一致;在单宽流量大于28 m^(2)/s时,水流通过突扩突跌掺气设施后均能形成稳定的侧空腔和底空腔;在流经阶梯段过程中,掺气作用逐渐从四周向内部发展,最后形成均匀的掺气水流;连接段突扩突跌掺气设施和阶梯的联合作用能够有效地提高水流在底板和边墙处的掺气量;在单宽流量为54 m^(2)/s时,连接段末端掺气均匀水流的掺气量高达20%。通过设置前置突扩突跌掺气设施,能有效提高大单宽流量阶梯水流掺气量,降低泄洪建筑物产生空蚀破坏的风险。 展开更多
关键词 突扩突跌掺气设施 曲线阶梯水流 掺气量 Realizable k-ε紊流模型 Mixture模型
下载PDF
由膜孔灌水流推进和消退资料推求点源入渗参数 被引量:9
2
作者 费良军 谭奇林 王文焰 《灌溉排水》 CSCD 1999年第1期6-9,共4页
根据膜孔灌大田灌水试验实测资料,研究了膜孔灌膜上水流推进和消退规律,提出了利用膜孔灌大田水流推进和消退资料推求充分供水条件下单点源入渗参数的方法。实例计算表明,这一方法能简单而有效地求得大田膜孔平均入渗参数。
关键词 膜孔灌 水流推进曲线 水流消退曲线 灌溉水流
下载PDF
由膜孔畦灌水流推进及水深资料推求点源入渗参数 被引量:8
3
作者 吴军虎 费良军 +1 位作者 王运生 刘立明 《西安理工大学学报》 CAS 1999年第4期95-98,共4页
根据膜孔畦灌大田灌水试验实测资料,研究了膜上水流推进规律,并对膜孔入渗采用Kostiakov入渗模型,提出利用膜孔畦灌田面水流推进和观测断面水深资料推求充分供水条件下点源入渗参数的新方法。实例计算表明,该法简单易行,... 根据膜孔畦灌大田灌水试验实测资料,研究了膜上水流推进规律,并对膜孔入渗采用Kostiakov入渗模型,提出利用膜孔畦灌田面水流推进和观测断面水深资料推求充分供水条件下点源入渗参数的新方法。实例计算表明,该法简单易行,并可消除土壤空间变异性对入渗参数的影响。该研究成果为膜孔灌理论与技术研究奠定了基础。 展开更多
关键词 膜孔灌 水流推进曲线 充分供水 点源入渗参数
下载PDF
由膜孔灌水流推进和消退资料推求灌溉质量指标研究
4
作者 马雪姣 马领娣 +2 位作者 张建芳 程东娟 费良军 《安徽农业科学》 CAS 北大核心 2009年第10期4647-4648,4698,共3页
[目的]寻求简化灌水质量指标推求的方法。[方法]根据膜孔灌大田灌水试验实测资料,研究相同流量不同次灌水的水流推进和消退规律,基于充分供水条件下膜孔灌入渗规律的特点,提出了利用膜孔灌大田水流推进和消退资料推求膜孔灌灌水均匀度... [目的]寻求简化灌水质量指标推求的方法。[方法]根据膜孔灌大田灌水试验实测资料,研究相同流量不同次灌水的水流推进和消退规律,基于充分供水条件下膜孔灌入渗规律的特点,提出了利用膜孔灌大田水流推进和消退资料推求膜孔灌灌水均匀度和灌水效率的方法。[结果]随着灌水次数的增加,水流推进加快,消退变慢,积水消退时间明显延长;膜孔灌田面水流推进和消退曲线满足一元二次函数关系。随着灌水次数的增加,畦首渗水时间变化不大,尾部渗水时间变化较大;研究提出的简化灌水均匀度计算公式,能简单而有效地求得大田膜孔灌灌溉质量指标。[结论]该研究为膜孔灌技术要素设计和灌水质量评价奠定了基础。 展开更多
关键词 膜孔灌 水流推进曲线 水流消退曲线 灌溉质量指标
下载PDF
离心力对轴对称弯道河槽张力作用的研究 被引量:2
5
作者 黑明伟 张佳羽 +4 位作者 任正菊 程云 孙璐 孙长利 张拥军 《应用物理》 CAS 2019年第11期455-461,共7页
采用镜像对称设置的匀速圆周运动系统,根据其向心力与离心力的作用与反作用力性质,在受约束离心力的作用下,全系统产生周期性运动,并应用于圆弧弯道水流离心力对河槽张力作用的计算。可用于圆弧弯道水流段水利工程的设计和防洪安全等领域。
关键词 曲线水流 离心力 张力
下载PDF
Development of a New Index for Integrating Landscape Patterns with Ecological Processes at Watershed Scale 被引量:42
6
作者 CHEN Liding TIAN Huiying +1 位作者 FU Bojie ZHAO Xinfeng 《Chinese Geographical Science》 SCIE CSCD 2009年第1期37-45,共9页
Understanding the relationship between landscape pattems and ecological processes has been a central yet challenging research theme in landscape ecology. Over the past decades, many landscape metrics have been propose... Understanding the relationship between landscape pattems and ecological processes has been a central yet challenging research theme in landscape ecology. Over the past decades, many landscape metrics have been proposed but few directly incorporated ecological processes. In this paper, we developed a landscape index, namely, location-weighted landscape index (LWLI) to highlight the role of landscape type in ecological processes, such as nutrient losses and soil erosion. Within the framework of the Lorenz curve theory, we develop this index by integrating land- scape pattern and point-based measurements at a watershed scale. The index can be used to characterize the contribution of landscape pattern to ecological processes (e.g. nutrient losses) with respect to a specific monitoring point in a watershed. Through a case study on nutrient losses in an agricultural area in northeastern China, we found that nutrient losses tended to be higher for a watershed with a higher LWLI value, and vice versa. It implied that LWLI can be used to evaluate the potential risk of nutrient losses or soil erosion by comparing their values across watersheds. In addition, this index can be extended to characterize ecological processes, such as the effect of landscape pattern on wildlife inhabitation and urban heat island effect. Finally, we discuss several problems that should be paid attention to when applying this index to a heterogeneous landscape site. 展开更多
关键词 landscape pattern location-weighted landscape index (LWLI) Lorenz curve theory nutrient loss surface water quality
下载PDF
Pressure Buildup Analysis Using Type Curves for a Well in a Pressure-Maintained System
7
作者 林加恩 杨慧珠 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2007年第1期6-11,共6页
The development and application of a new solution is demonstrated for the type-curve analysis and in-terpretation of well test data from a multiwell reservoir system of both production and injection wells with two-pha... The development and application of a new solution is demonstrated for the type-curve analysis and in-terpretation of well test data from a multiwell reservoir system of both production and injection wells with two-phase flow. The buildup type curves or buildup behavior could be obtained through the solution by using su-perposition. But a new outer boundary condition for variable pressure boundary must be introduced to obtain the correct pressure buildup solutions by superposition. A technique is shown to determine the deviation time from the infinite-acting semilog radial flow stabilization in the derivatives of pressure, which is calculated with respect to and plotted vs. shut-in time. Field examples are given to illustrate the use of the proposed method for analyzing transient pressure data from a well located in a multi-well water-injection reservoir. An adaptive genetic algorithm-based method is used to match the pressure and pressure derivative data to estimate reservoir parameters. The validity and applicability of the proposed method are also demonstrated through the examples. 展开更多
关键词 multi-well reservoir pressure buildup two-phase flow type curve analysis
下载PDF
Turbine efficiency test on a large hydraulic turbine unit 被引量:5
8
作者 YAN ZongGuo ZHOU LingJiu WANG ZhengWei 《Science China(Technological Sciences)》 SCIE EI CAS 2012年第8期2199-2205,共7页
The flow rate measurements are the most difficult part of efficiency tests on prototype hydraulic turbines.Among the numerous flow rate measurement methods,the Winter Kennedy method is preferred for measuring turbine ... The flow rate measurements are the most difficult part of efficiency tests on prototype hydraulic turbines.Among the numerous flow rate measurement methods,the Winter Kennedy method is preferred for measuring turbine flow rates,since it is convenient,practical and economical.This paper describes efficiency tests on a large 300 MW Francis turbine,with the flow rate measured using the Winter Kennedy method and the Winter Kennedy flow rate coefficient calibrated using the Gibson method.The measured turbine efficiency curve is then compared with the curve provided by the manufacturer.The CFD calculations including the spiral case are then used to analyze the influence with the coefficient K and index n in the Winter Kennedy flow rate formula on the flow rate measurement.The uncertainty values of n and K are a key reason for the differences between the curves obtained from the efficiency test and the curves provided by the manufacturer. 展开更多
关键词 hydraulic turbine efficiency test flow rate measurement CFD calculations measurement uncertainty
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部