装备维修经济分析浅论

武器装备的维修活动必须讲求经济效益。针对现役武器装备维修保障建设中的弊端,利用经济学原理,从最佳预防性维修工时和装备大修的经济界限入手,对武器装备的维修工作进行了经济分析。按维修费用最小原则确定了最佳预防性维修工时,通过研究比较旧装备与新装备的等值费用现值明确了装备大修的经济界限,从而有效地提高武器装备维修效能,降低维修保障费用,为现役武器装备维修保障的实施提供了一个良好的思考方向。

Manganese extraction from high-iron-content manganese oxide ores by selective reduction roasting-acid leaching process using black charcoal as reductant

Reduction roasting-acid leaching process was utilized to process high-iron-content manganese oxide ore using black charcoal as reductant. The results indicate that, compared with the traditional reductant of anthracite, higher manganese extraction efficiency is achieved at lower roasting temperature and shorter residence time. The effects of roasting parameters on the leaching efficiency of Mn and Fe were studied, and the optimal parameters are determined as follows: roasting temperature is 650 °C, residence time is 40 min, and black charcoal dosage is 10%(mass fraction). Under these conditions, the leaching efficiency of Mn reaches 82.37% while that of Fe is controlled below 7%. XRD results show that a majority of MnO2 and Fe2O3 in the raw ore are reduced to MnO and Fe3O4, respectively.

Technological Study on Instant Date Powder in Natural Ziziphus jujuba through Vacuum Freeze-drying

[Objective] The aim was to get optimized conditions for date powder with good color and taste.[Method] The pectinase enzymolysis and vacuum freeze-drying technology were used in the extract process of date powder.[Result] The production boasts of superior quality were with rich fragrance and uniform particle under certain process conditions.The optimized conditions for pectinase enzymolysis were:the amount of pectinase reached to 0.1% of that of date syrup,enzymolysis temperature and time were 50 ℃ and 50 min respectively,the pH value was 4.0.The optimized conditions for vaccum freeze-drying were:10% altodextrin,three times volumn of water with the thickness of 7 mm.[Conclusion] The optimized conditions were obtained in this study to produce instant date powder from Ziziphus jujuba.

Optimization of Enzyme-assisted Extraction Technology for Tartary Buckwheat Shell Procyanidins with Response Surface Methodology

This study was conducted to investigate the effects of cellulase dosage, enzymolysis time, pH and enzymolysis temperature on procyanidin extraction rate by single factor experiment, with tartary buckwheat shell as an experimental material.Main process parameters were optimized to obtain a regression model by response surface methodology. The results of variance analysis indicated that the regression model reflected the relationship between buckwheat shell procyanidin extraction rate with enzyme dosage, enzymolysis time, pH and enzymolysis temperature; and the optimal process parameters were enzyme dosage of 6.5 mg/g, enzymolysis time of 1.5 h, pH at 4.7 and enzymolysis temperature at 46 ℃. Three parallel experiments were conducted under these process parameters. In practice, the highest procyanidin extraction rate was 6.78 g/100 g. The relative error between the predicted value of regression model and the actual value was 1.3%. The regression equation fitted the real situation better.

A primary study of simultaneous leaching of silver containing manganese ore and a sphalerite concentrate

It is demonstrated that a low grade, silver containing manganese deposit can be exploited by reaction with a ZnS concentrate. In the process, Mn(IV) is reduced to Mn(II) and the ZnS converted to ZnSO4. In the process, Mn and Zn are solubilized. By studying the effects of quantity of reducing agent and sulfuric acid added and of time, temperature and liquid-to-solid ratio on the leaching process, the optimum technological conditions have been achieved under which the amount of manganese leached was 98 %. The silver can be removed from remaining solids by adding ammonia liquor. Then by adding hydrazine hydrate, sponge silver with purity up to 99 % can be obtained with a recovery of 87 %.

Development of fractures in soft rock surrounding a roadway and their control

As the excavation of roadway, new fractures will be formed and the pre-existing fractures extend with the redistribution of stress in surrounding rocks. Eventually, fracture zone and bed separation are formed in rocks because of the developed fractures. Therefore, mastering the fracture evolution of surrounding rocks is very important to maintain the stability of roadway. The surrounding rocks of main haulage road- way in a certain coal mine is so broken and loose that the supporting is very difficult. Based on compre- hensive anal[ysis of the engineering geological conditions, a sight instrument was used to observe the fractures of internal surrounding rocks, Four indices, i.e., the width of fracture zone W, the number of fractures n, the width of fractures d and rock fracture designation RFD, are put forward to evaluate the fracture dewelopment. According to the evolution rules of the soft rock roadway from this paper, control principles by stages and by regions are presented through the research. At the same time, the best time of grouting reinforcement is determined on the basis of fracture saturation. Field practice shows that the roadway can satisfy normal production during service periods by suitable first support and grouting reinforcement.

Utilization Starch of Avocado Seed （Persea Americana Mill.） as a Raw Material for Dextrin

Starch ofavocado seeds can be used as an alternative source of starch because it contains 80.1% starch. Natural starch can be made into a modified starch, for example dextrin. Dextrin can be made by using acid or enzyme hydrolysis. The purposes of this research were determine the concentration of hydrochloric acid （HCl）, the temperature and heating timein the optimum process of hydrolysis of starch into dextrin and to determine the quality of the resulting product dextrin terms of Indonesian National Standard 01-2593-1992. The methode was used in this research is hydrolisis with hydrochloric acid （HCl）. The results processing into starch avocado seed yield is 23.15%. HCl concentration, temperature and heating time significantly affect the value of dextrose equivalent （DE）, viscosity and part soluble in cold water. There is interaction between HCl concentration, temperature and heating time on the value of DE, viscosity and part soluble in cold water. Optimum conditions of process was obtained at a concentration of 0.15 N HCl, 30 minutes heating time and heating temperature of 90 ℃. Dextrose equivalent （DE） value is 19.61%. The value of solubility in cold water is 90.19%. Viscosity value is 1.61 ° E. Dextrin is not accordance with the standards of quality parameters Indonesian National Standard 01-2593-1992. Dextrin produced should be applied to non-food industry.

Study on Extraction of Insoluble Dietary Fiber from Apple pulp

[ Objective] To optimize the extraction conditions of insoluble dietary fiber from apple pulp. [ Method] The insoluble dietary fiber was ex-tracted from the apple pulp by alkaline, and the optimal extraction conditions were determined by orthogonal experiment. [ Result] The influential or-der of each factor on the extraction of insoluble fiber decreased in the order of solid-liquid ratio 〉 alkali concentration 〉 temperature 〉 extraction time, and the optimal extraction technology was A3 B1 C2 D2, that is, 1：11 （g/ml） of solid-liquid ratio, 0.25 mol/L alkaline concentration, 50 ℃ of extraction temperature and 2.0 h extraction time, under these conditions, the yield of insoluble dietary fiber was 35.46%. [ Conchsion] The apple pulp contains rich dietary fiber, and the insoluble dietary fiber extracted from the apple pulp has great development value. Key words Apple; Insoluble dietary fiber; Extraction technology; China

Study on Fresh Yam Fermented Milk Technology

[ Objective] The aim was to study the fermentation of yam and lactic acid bacteria. [Method] Taking fresh yam as main materials, optimized wheat, skimmed milk and white sugar as auxiliary materials, the lactic acid bacteria developed into healthy drinks with unique flavor. The ratio of raw materials, the best conditions for hydrolysis of malt, lactic acid fermentation process conditions, such as product formulations were studied. [ Result ]The best conditions for the yam matt enzyme dosage was 21.0%, malt dosage 1.4%, reaction temperature 68℃, hydrolysis time 60 min; optimal fermentation process to increase milk production 2.4% , fermentation temperature 38 ℃, fermentation time 7. 0h, inoculums size 5.0%. [ Conclusion] The fresh yam tastes fresh, sour and sweet. The natural white ram is of high quality.

Performance of a two-state quantum engine improved by the superposition effect

The performance of a two-state quantum engine under different conditions is analyzed. It is shown that the efficiency of the quantum engine can be enhanced by superposing the eigenstates at the beginning of the cycle. By employing the finite-time movement of the potential wall, the power output of the quantum engine as well as the efficiency at the maximum power out- put （EMP） can be obtained. A generalized potential is adopted to describe a class of two-level quantum engines in a unified way. The results obtained show clearly that the performances of these engines depend on the external potential, the geometric configuration of the quantum engines, and the superposition effect. Moreow^r, it is found that the superposition effect will en- large the optimally operating region of quantum engines.