期刊文献+
共找到40篇文章
< 1 2 >
每页显示 20 50 100
基于最大长序列刺激的听觉诱发反应信噪比分析与仿真 被引量:4
1
作者 苏园园 王涛 李彬 《航天医学与医学工程》 CAS CSCD 北大核心 2010年第5期335-339,共5页
目的提出应用MLS方法后反应信噪比的变化公式,探讨不同阶数序列、刺激率和噪声条件下,最大长序列阶数和刺激率等参数与听觉诱发反应信噪比变化和还原质量的关系,并验证推导的理论公式。方法通过仿真实验,还原不同刺激参数和噪声环境下... 目的提出应用MLS方法后反应信噪比的变化公式,探讨不同阶数序列、刺激率和噪声条件下,最大长序列阶数和刺激率等参数与听觉诱发反应信噪比变化和还原质量的关系,并验证推导的理论公式。方法通过仿真实验,还原不同刺激参数和噪声环境下的听觉诱发反应,并讨论其信噪比的变化情况。结果在噪声环境和刺激率不变的情况下,信噪比的提高与阶数成正比;在噪声环境和阶数不变的情况下,信噪比的变化与刺激率成反比。结论在已知反应先验知识的情况下,本文提出的理论公式可较为准确地估计还原反应的信噪比变化情况,为不同实验条件下的最大长序列提供选择依据,并可为高刺激率下听觉诱发反应及听觉系统的适应性问题的研究提供实验设计参考。 展开更多
关键词 听觉诱发反应 最大长序列 信噪比
下载PDF
男性上肢长骨的测量及其最大长推算 被引量:5
2
作者 陈洪 甘晟光 《中国法医学杂志》 CSCD 2005年第3期135-137,共3页
目的探讨用上肢长骨的残骨某一项指标建立肱骨、尺骨和桡骨最大长的回规方程,然后可根据所得值间接推算人体身高。方法选男性肱骨、尺骨和桡骨50例,左、右共100侧肢体。用人体测量仪器,按体质人类学测量方法进行各项指标测量,所得值经... 目的探讨用上肢长骨的残骨某一项指标建立肱骨、尺骨和桡骨最大长的回规方程,然后可根据所得值间接推算人体身高。方法选男性肱骨、尺骨和桡骨50例,左、右共100侧肢体。用人体测量仪器,按体质人类学测量方法进行各项指标测量,所得值经统计学分析后,分别与肱骨、尺骨和桡骨最大长建立直线回规方程。结果经相关分析建立了肱骨最大长回规方程17个,尺骨最大长回规方程8个,桡骨最大长回规方程11个。结论若能测得上肢长骨残骨的某一项指标,就可用所建立的回规方程推算该骨的最大长,这在法医学上具有一定的参考价值。 展开更多
关键词 男性 上肢 测量 最大长推算 肱骨 尺骨 桡骨 法医人类学
下载PDF
男性锁骨的测量及其最大长推算 被引量:1
3
作者 陈洪 王敦林 +1 位作者 施少萍 毛宜群 《人类学学报》 CSCD 北大核心 2008年第2期153-157,共5页
目的本文在于探讨用锁骨的某一项测量指标建立推算其最大长的回归方程,然后可根据所得值间接推断死者的身高。方法本地收集的75例成年男性尸体,按体质人类学测量方法,用人体测量仪器对其锁骨的各项指标进行测量,所得值用SPSS统计学软件... 目的本文在于探讨用锁骨的某一项测量指标建立推算其最大长的回归方程,然后可根据所得值间接推断死者的身高。方法本地收集的75例成年男性尸体,按体质人类学测量方法,用人体测量仪器对其锁骨的各项指标进行测量,所得值用SPSS统计学软件分析处理。结果相关分析和回归分析,表明锁骨的各项指标与锁骨的最大长之间均有着非常显著性的关系存在,P<0.001。进而建立了相应的回归方程。结论在实际工作中,如果能测得锁骨残段的某一项指标,就可用所建立的回归方程推算其最大长,这在法医人类学上具有一定的参考价值。 展开更多
关键词 锁骨最大长 回归方程 法医人类学
下载PDF
太行山猕猴肱骨最大长与第I胸椎变量的相关性研究 被引量:1
4
作者 薛德明 《河南师范大学学报(自然科学版)》 CAS CSCD 2000年第2期90-90,共1页
关键词 猕猴 肱骨最大长 第Ⅰ胸椎 相关系
下载PDF
男性上肢三大长骨最大长的回归方程
5
作者 王敦林 陈洪 虞琴 《解剖学杂志》 CAS CSCD 北大核心 2007年第6期793-796,共4页
目的:探讨用上肢长骨的残骨某一项指标建立肱骨、尺骨和桡骨最大长的回归方程,推算人体身高。方法:选男性肱骨、尺骨和桡骨50例,左、右共100侧肢体。用人体测量仪器,按体质人类学测量方法进行各项指标测量,所得值经统计学分析后,分别与... 目的:探讨用上肢长骨的残骨某一项指标建立肱骨、尺骨和桡骨最大长的回归方程,推算人体身高。方法:选男性肱骨、尺骨和桡骨50例,左、右共100侧肢体。用人体测量仪器,按体质人类学测量方法进行各项指标测量,所得值经统计学分析后,分别与肱骨、尺骨和桡骨最大长建立直线回归方程。结果:经相关分析建立了肱骨最大长回归方程17个,尺骨最大长回归方程8个,桡骨最大长回归方程11个。结论:若能测得上肢长骨残骨的某一项指标,就可用所建立的回规方程推算该骨的最大长,在法医学上具有一定的参考价值。 展开更多
关键词 法医人类学 肱骨 尺骨 桡骨 残骨 最大长
下载PDF
测量桡骨最大长推断身高 被引量:1
6
作者 马莉莉 李永敬 《中国现代医生》 2011年第7期144-145,共2页
目的应用数字X线测量最大桡骨长,试图建立可用于法医实际检案的利用桡骨推断人体身高的回归方程以及为个人识别提供可靠数据。方法收集太原各大医院来自太原籍贯的20.30岁健康男性青年的体检X线片467张,身高信息登记准确。测量X线片... 目的应用数字X线测量最大桡骨长,试图建立可用于法医实际检案的利用桡骨推断人体身高的回归方程以及为个人识别提供可靠数据。方法收集太原各大医院来自太原籍贯的20.30岁健康男性青年的体检X线片467张,身高信息登记准确。测量X线片的左右侧桡骨最大长,左右侧分为两组,用SPSS统计软件对各测量值与身高进行相关回归分析,建立桡骨推断身高的回归方程。结果桡骨最大长与身高高度正相关,左侧r=0.789(P〈0.01),右侧1=-0.758(P〈0.01)。建立一元回归方程2个,经线性回归模型假设检验,均有统计学意义(P〈0.05)。所建立的回归方程的回归系数分别为5.66和5.64,回归方程的标准误分别为5.03cm和5.05cm。结论本研究所建立的一元回归方程可用于太原地区汉族人群利用桡骨最大长推断身高。 展开更多
关键词 桡骨最大长 身高推断 个人识别
下载PDF
测量活体髋骨最大长推断身高
7
作者 李永敬 梁景青 《中国现代医生》 2009年第31期34-34,36,共2页
目的通过影像学方法测量髋骨最大长建立山西汉族人群的身高推算方程,为法医个人识别提供帮助。方法收集山西各大医院来自山西籍贯的10~30岁健康男性青年的体检X线片247张,并登记其身高。测量X线片的左右侧髋骨最大长(骨盆高),将测量值... 目的通过影像学方法测量髋骨最大长建立山西汉族人群的身高推算方程,为法医个人识别提供帮助。方法收集山西各大医院来自山西籍贯的10~30岁健康男性青年的体检X线片247张,并登记其身高。测量X线片的左右侧髋骨最大长(骨盆高),将测量值按左右侧分组,然后对髋骨最大长与对应的身高进行相关分析,同时进行线性回归分析,建立髋骨推断身高的回归方程。结果髋骨最大长与身高高度正相关,左侧r=0.689(P<0.01),右侧r=0.658(P<0.01)。建立一元回归方程2个,经线性回归模型假设检验,均有统计学意义(P<0.05)。所建立的回归方程的回归系数分别为4.66、4.64,回归方程的标准误分别为4.03cm、4.05cm。结论本研究所建立的回归方程可用于山西汉族人群利用髋骨最大长推断身高。 展开更多
关键词 髋骨最大长 身高推断 线性回归分析
下载PDF
基于最大长序列的听觉诱发电位噪声抑制能力分析
8
作者 陈韵儿 詹长安 +2 位作者 彭贤 符秋养 王涛 《生物医学工程学杂志》 EI CAS CSCD 北大核心 2018年第2期266-272,共7页
最大长序列(m序列)是在高刺激率条件下研究听觉诱发电位(AEP)线性/非线性成分的一种有效手段。但在实用中如何评估m序列的阶数选择对噪声抑制能力的影响是有待明确的问题。本研究主要采用两种类型实测数据评估m序列噪声抑制。根据m序列... 最大长序列(m序列)是在高刺激率条件下研究听觉诱发电位(AEP)线性/非线性成分的一种有效手段。但在实用中如何评估m序列的阶数选择对噪声抑制能力的影响是有待明确的问题。本研究主要采用两种类型实测数据评估m序列噪声抑制。根据m序列互相关法在去卷积计算过程中的两个计算步骤,即叠加平均和互相关,分别估算不同阶数(5~12阶)条件下自发脑电噪声抑制比,并选择7阶和9阶m序列进行非线性AEP实验。结果表明,m序列对自发脑电的噪声抑制比与随机噪声条件下的理论值完全符合,证实噪声抑制比主要取决于序列的总长度或总的记录时间。对于7阶和9阶m序列的线性/非线性成分进行相似性比较,提示AEP成分对阶数不敏感。本研究提供了一种选择m序列的更全面的解决方案,可更好地促进基于m序列的非线性AEP的应用。 展开更多
关键词 听觉诱发电位 最大长序列 噪声抑制
原文传递
空腹受弯钢构件板件设计的若干问题研究 被引量:7
9
作者 王庆利 张淑清 +1 位作者 张文颖 许丕元 《沈阳建筑工程学院学报(自然科学版)》 2004年第1期17-19,共3页
应用轴压格构柱的有关规定,确定了空腹受弯钢构件孔口上方受压T形截面杆件的最大长细比和开口宽度的最大值;为确保板件具有一定的刚度和强度,提出了空腹受弯钢构件孔口上方腹板和孔间腹板的最小尺寸以及孔间腹板的强度验算式;基于薄板... 应用轴压格构柱的有关规定,确定了空腹受弯钢构件孔口上方受压T形截面杆件的最大长细比和开口宽度的最大值;为确保板件具有一定的刚度和强度,提出了空腹受弯钢构件孔口上方腹板和孔间腹板的最小尺寸以及孔间腹板的强度验算式;基于薄板的弹性稳定理论,确定了在纯弯状态下空腹受弯钢构件孔口上方腹板和孔间腹板的最大高厚比. 展开更多
关键词 空腹受弯钢构件 最大长细比 最小尺寸 最大高厚比
下载PDF
通信终端声压限值要求的来源及走向
10
作者 易高雄 《电声技术》 2013年第5期78-84,共7页
通信终端的声安全问题是一个日益严重的问题,对终端可能输出的最大声压进行控制和测试,是用来保障用户以及消费群体远离听力损伤隐患的一个重要环节。分析和介绍了目前通信终端最大声压有关标准中的指标要求,并对标准中各个指标的来源... 通信终端的声安全问题是一个日益严重的问题,对终端可能输出的最大声压进行控制和测试,是用来保障用户以及消费群体远离听力损伤隐患的一个重要环节。分析和介绍了目前通信终端最大声压有关标准中的指标要求,并对标准中各个指标的来源以及未来走向加以总结和介绍。 展开更多
关键词 最大声压 噪声暴露量 最大长时干扰声压 短时脉冲峰值声压 最大等效输出声压
下载PDF
Effect of Stoichiometric Variables in AQUASIM ——Take the Ethanol in ADM1 for an Example
11
作者 封瑛 李兆华 Rune Bakke 《Agricultural Science & Technology》 CAS 2012年第5期1148-1151,共4页
[Objective] The aim was to investigate the effect of stoichiometric variables in AQUASIM, a simulation tool for digestion process. [Method] The ADM1 was modified in AQUASIM based on the existing physical experimental ... [Objective] The aim was to investigate the effect of stoichiometric variables in AQUASIM, a simulation tool for digestion process. [Method] The ADM1 was modified in AQUASIM based on the existing physical experimental data. Then the stoichiometric variables were adjusted in AQUASIM to test the effects of decay rate, maximum uptake rate and yield of ethanol in the simulation results. [Result] The biomass decay rate of ethanol was 0.02 per day; the maximum uptake rate of ethanol was 228 kgCOD_S/kg COD_X per day and the yield of ethanol was 0.029 5 kg COD_X/kg COD_S in this case. [Conclusion] The larger biomass decay rate of ethanol causes less accumulation of ethanol in the anaerobic digestion model simu- lation. Maximum uptake rate shows little effort to this modeling in a certain range. Larger yield of ethanol will get larger peak values in the simulation results. 展开更多
关键词 ETHANOL Decay rate Maximum uptake rate YIELD AQUASIM
下载PDF
An Improved Description of Characteristics Length in Substrate Current Model for Submicron and Deep-Submicron LDD MOSFET's
12
作者 于春利 杨林安 郝跃 《Journal of Semiconductors》 EI CAS CSCD 北大核心 2004年第9期1084-1090,共7页
A novel substrate current model is proposed for submicron and deep-submicron li ghtly-doped-drain (LDD) n-MOSFET,with the emphasis on accurate description of the characteristics length by taking the effects of channe... A novel substrate current model is proposed for submicron and deep-submicron li ghtly-doped-drain (LDD) n-MOSFET,with the emphasis on accurate description of the characteristics length by taking the effects of channel length and bias int o account.This is due to that the characteristics lenth significantly affects th e maximum lateral electric field and the length of velocity saturation region,bo th of which are very important in modeling the drain current and the substrate c urrent.The comparison between simulations and experiments shows a good predictio n of the model for submicron and deep-submicron LDD MOSFET.Moreover,the analyti cal model is suitable for descgn of devices as it is low in computation consumpt ion. 展开更多
关键词 LDD MOSFET substra te current characteristics length maximum lateral electric field
下载PDF
通信中的噪声安全要求及测试
13
作者 易高雄 《现代电信科技》 2012年第1期27-32,共6页
通信设备及终端的噪声安全是一个日益严重的问题,对噪声安全进行控制和测试,是保障用户以及消费群体听力健康的重要环节。本文分析了目前通信中存在的噪声安全问题、国际国内与噪声安全相关的标准和法规以及未来走势,并对噪声安全各个... 通信设备及终端的噪声安全是一个日益严重的问题,对噪声安全进行控制和测试,是保障用户以及消费群体听力健康的重要环节。本文分析了目前通信中存在的噪声安全问题、国际国内与噪声安全相关的标准和法规以及未来走势,并对噪声安全各个指标的测试方法加以介绍。 展开更多
关键词 噪声声功率 最大声压级 噪声暴露量 最大长时干扰声压 短时脉冲峰值声压
下载PDF
Effects of rearing temperature and density on growth,survival and development of sea cucumber larvae,Apostichopus japonicus(Selenka) 被引量:5
14
作者 刘广斌 杨红生 刘石林 《Chinese Journal of Oceanology and Limnology》 SCIE CAS CSCD 2010年第4期842-848,共7页
In laboratory conditions,effects of rearing temperature and stocking density were examined on hatching of fertilized egg and growth of auricularia larvae of Apostichopus japonicus respectively.Data series like larval ... In laboratory conditions,effects of rearing temperature and stocking density were examined on hatching of fertilized egg and growth of auricularia larvae of Apostichopus japonicus respectively.Data series like larval length and density,metamorphic time,and survival rate of the larvae were recorded.Statistics showed that for A.japonicus,survival rate(from fertilized egg to late auricularia) decreased significantly with the increasing rearing temperature(P<0.05).At different temperatures SGR was statistically significant as well(P<0.05) from day 1,and maximal SGR was found on day 9 at 24℃(159.26±3.28).This study clearly indicated that at low temperature(<24℃),metamorphic rate was remarkably higher than at higher temperature(>26℃).Hatching rate was significantly different between 0.2-5 ind./ml groups and 20-50 ind./ml groups.Rearing larvae at the higher density had the smaller maximal-length,whereas needed longer time to complete metamorphosis.This study suggested that 21℃ and 0.4 ind./ml can be used as the most suitable rearing temperature and stocking density for large-scale artificial breeding of A.japonicus's larvae. 展开更多
关键词 Apostichopus japonicus egg HATCH LARVAE GROWTH METAMORPHISM
下载PDF
Long-release-interval-first real-time scheduling algorithm and its schedulability test
15
作者 沈卓炜 汪芸 《Journal of Southeast University(English Edition)》 EI CAS 2006年第4期484-489,共6页
To fulfill the requirements for hybrid real-time system scheduling, a long-release-interval-first (LRIF) real-time scheduling algorithm is proposed. The algorithm adopts both the fixed priority and the dynamic prior... To fulfill the requirements for hybrid real-time system scheduling, a long-release-interval-first (LRIF) real-time scheduling algorithm is proposed. The algorithm adopts both the fixed priority and the dynamic priority to assign priorities for tasks. By assigning higher priorities to the aperiodic soft real-time jobs with longer release intervals, it guarantees the executions for periodic hard real-time tasks and further probabilistically guarantees the executions for aperiodic soft real-time tasks. The schedulability test approach for the LRIF algorithm is presented. The implementation issues of the LRIF algorithm are also discussed. Simulation result shows that LRIF obtains better schedulable performance than the maximum urgency first (MUF) algorithm, the earliest deadline first (EDF) algorithm and EDF for hybrid tasks. LRIF has great capability to schedule both periodic hard real-time and aperiodic soft real-time tasks. 展开更多
关键词 real-time scheduling schedulability test earliest deadline first maximum urgency first long release interval first
下载PDF
CO_2 flux and seasonal variability in the turbidity maximum zone and surrounding area in the Changjiang River estuary 被引量:4
16
作者 李学刚 宋金明 +3 位作者 袁华茂 李宁 段丽琴 曲宝晓 《Chinese Journal of Oceanology and Limnology》 SCIE CAS CSCD 2015年第1期222-232,共11页
The turbidity maximum zone(TMZ) is one of the most important regions in an estuary.However,the high concentration of suspended material makes it difficult to measure the partial pressure of CO_2(pCO_2) in these region... The turbidity maximum zone(TMZ) is one of the most important regions in an estuary.However,the high concentration of suspended material makes it difficult to measure the partial pressure of CO_2(pCO_2) in these regions.Therefore,very little data is available on the pCO_2 levels in TMZs.To relatively accurately evaluate the CO_2 flux in an example estuary,we studied the TMZ and surrounding area in the Changjiang(Yangtze) River estuary.From seasonal cruises during February,August,November 2010,and May 2012,the pCO_2 in the TMZ and surrounding area was calculated from pH and total alkalinity(TA)measured in situ,from which the CO_2 flux was calculated.Overall,the TMZ and surrounding area acted as a source of atmosphere CO_2 in February and November,and as a sink in May and August.The average FCO_2was-9,-16,5,and 5 mmol/(m^2·d) in May,August,November,and February,respectively.The TMZ's role as a source or sink of atmosphere CO_2 was quite different to the outer estuary.In the TMZ and surrounding area,suspended matter,phytoplankton,and pH were the main factors controlling the FCO_2,but here the influence of temperature,salinity,and total alkalinity on the FCO_2 was weak.Organic carbon decomposition in suspended matter was the main reason for the region acting as a CO_2 source in winter,and phytoplankton production was the main reason the region was a CO_2 sink in summer. 展开更多
关键词 CO2 flux seasonal variability turbidity maximum zone Changjiang River estuary
下载PDF
Population dynamics of marine ciliate Euplotes vannus (Protozoa, Ciliophora) in different artificial seawaters 被引量:3
17
作者 许恒龙 朱明壮 +3 位作者 姜勇 高珊 MIN Gi-Sik AL-RASHEID Khaled A.S. 《Chinese Journal of Oceanology and Limnology》 SCIE CAS CSCD 2011年第1期109-117,共9页
To study population dynamics of marine ciliates in different artificial seawaters (ASW), the population growth dynamics of a common marine ciliate Euplotes vannus were investigated using beef extract media and rice ... To study population dynamics of marine ciliates in different artificial seawaters (ASW), the population growth dynamics of a common marine ciliate Euplotes vannus were investigated using beef extract media and rice media for five types of ASW and natural seawater (NSW). The results show that: (1) the population growth rate was in the order of NSW〉Flack ASW〉Nakamula ASW〉Schmadz ASW〉Oshima ASW〉Subow ASW and was considerably higher in rice media than in beef extract media (apart from Subow ASW); (2) the maximum density of E. vannus in stationary phase in each treatment was ranked as Hack ASW〉Nakamula ASW〉Schmadz ASW〉NSW〉Oshima ASW〉Subow ASW, and was again higher in rice media than in beef extract media (except for Subow ASW); (3) the exponential and stationary phases were longer in rice media than in beef extract media; (4) strains of E. vannus that had been domesticated for 〉1 year in ASW grew significantly slower, with lower maximum density and longer stationary phase than those isolated and maintained in NSW. It was demonstrated that: (1) E. vannus may grow well in Flack, Nakamula and Schmads ASW compared with NSW (mainly in terms of growth rate); and (2) Oshima ASW is the preferred choice for stock cultures of E. vannus, but the ASWs Flack, Nakamula and Schmadz are preferred for mass culture. These findings suggest that these three ASWs are effective for the cultivation of marine protozoa for experimental studies on ecology, toxicology and molecular biology. 展开更多
关键词 artificial seawater culture ECOLOGY marine ciliate population dynamics
下载PDF
Maximal sequence length of exact match between members from a gene family during early evolution
18
作者 温晓 郭兴益 樊龙江 《Journal of Zhejiang University-Science B(Biomedicine & Biotechnology)》 SCIE EI CAS CSCD 2005年第6期470-476,共7页
Mutation (substitution, deletion, insertion, etc.) in nucleotide acid causes the maximal sequence lengths of exact match (MALE) between paralogous members from a duplicate event to become shorter during evolution. In ... Mutation (substitution, deletion, insertion, etc.) in nucleotide acid causes the maximal sequence lengths of exact match (MALE) between paralogous members from a duplicate event to become shorter during evolution. In this work, MALE changes between members of 26 gene families from four representative species (Arabidopsis thaliana, Oryza sativa, Mus mus- culus and Homo sapiens) were investigated. Comparative study of paralogous’ MALE and amino acid substitution rate (dA<0.5) indicated that a close relationship existed between them. The results suggested that MALE could be a sound evolutionary scale for the divergent time for paralogous genes during their early evolution. A reference table between MALE and divergent time for the four species was set up, which would be useful widely, for large-scale genome alignment and comparison. As an example, de- tection of large-scale duplication events of rice genome based on the table was illustrated. 展开更多
关键词 Maximal length of exact match (MALE) Divergent time Gene family Minimal length of exact match (MILE) Genome alignment
下载PDF
A new measuring method for maximal length, width and thickness dimensions of coarse aggregates
19
作者 段跃华 张肖宁 吴传海 《Journal of Central South University》 SCIE EI CAS 2011年第6期2150-2156,共7页
In order to establish a new method for measuring the dimensions of coarse aggregates, five different-size flat and elongated (F&E) coarse aggregates were glued into two specimens by epoxy resin, respectively, and ... In order to establish a new method for measuring the dimensions of coarse aggregates, five different-size flat and elongated (F&E) coarse aggregates were glued into two specimens by epoxy resin, respectively, and slice images were obtained by X-ray CT, then the aggregates were extracted by the fuzzy c-means clustering algorithm. Attributions of the particle on different cross-sections were determined by the ‘overlap area method’. And unified three-dimensional Cartesian coordinate system was established based on continuous slice images. The coefficient values of spherical harmonics descriptor representing particles surface profile were gained, then each scanned particle was represented by 60×120 discrete points conformably with spherical harmonics descriptor. The chord length and direction angles were determined by the calculation. With the major axis (L) and orthogonal axis (W and T), the calculated results were compared with those measured by caliper. It is concluded that the new L, W, and T dimension measuring method is able to take the place of the present manual measurement. 展开更多
关键词 coarse aggregate flat and elongated (F&E) aggregate X-ray CT digital image processing fuzzy c-means clustering overlap area method spherical harmonics
下载PDF
Culture techniques and growth characteristics of Dinophysis acuminata and its prey 被引量:1
20
作者 佟蒙蒙 周启星 +3 位作者 KULIS M.David 江天久 齐雨藻 ANDERSON M.Donald 《Chinese Journal of Oceanology and Limnology》 SCIE CAS CSCD 2010年第6期1230-1239,共10页
The dinoflagellate Dinophysis acurninata Claparede & Lachrnann is a toxic alga that causes diarrhetic shellfish poisoning. No Dinophysis species were maintained in culture for a long period of time until 2006 when Pa... The dinoflagellate Dinophysis acurninata Claparede & Lachrnann is a toxic alga that causes diarrhetic shellfish poisoning. No Dinophysis species were maintained in culture for a long period of time until 2006 when Park successfully established D. acuminata in culture using a three-step feeding protocol in which the cryptophyte, Geminigera cryophila, is fed to Myrionecta rubra (=Mesodinium rubrum), a ciliate that is in turn fed to D. acuminata. In this paper, we present the details of culturing D. acuminata from the Northeastern United States. The protocols described herein can be adopted for laboratory studies of this species. The effects of temperature on the growth and ingestion rates of D. acuminata were also examined. The results show that D. acuminata growth rate was 0.23/d at 10℃ and 0.11/d at 4℃when fed M. rubra prey. The maximum prey ingestion rate was 2.80 Dinophysis cell/d at 10℃, although the rate decreased slightly at 4℃. In overall, temperature showed a greater influence on growth rate of D. acuminata than on the ingestion rate under the study conditions, and the quantity of available food was also an important regulator to D. acurninata growth. 展开更多
关键词 Dinophysis acuminata Myrionecta rubra Geminigera cryophila growth rate ingestion rate
下载PDF
上一页 1 2 下一页 到第
使用帮助 返回顶部