Reservoir impoundment is related to several hydraulic engineering concerns,including irreversible valley contractions,landslides and reservoir-induced earthquakes.However,these phenomena,such as valley contractions,ar...Reservoir impoundment is related to several hydraulic engineering concerns,including irreversible valley contractions,landslides and reservoir-induced earthquakes.However,these phenomena,such as valley contractions,are hardly to be explained by the conventional method.The scientific understanding of water effects during impoundment and their hazards to hydraulic structure are needed.The effective stress law for fissured rock masses is introduced in the elasto-plastic model employing the Drucker-Prager criterion and implemented in the three dimension(3D)nonlinear finite element method(FEM)program Three-dimensional FINite Element(TFINE).The slope deforms towards river-way during impoundment since the increasing pore pressure in fissures changes stress state and leads to additional plastic deformation in the rock materials.The value of Biot coefficient and the influence of water on rock materials are discussed in detail.Thus,the mechanism of slope deformation during the impoundment of Jinping-I arch dam is revealed,and the deformation is accurately measured.The application of the effective stress law provides a method to consider stress assessment,deformation evaluation and stability estimate of hydraulic structures during the impoundment process.This is a beneficial exploration and an improvement of hydraulic engineering design.展开更多
Saffron is the most precious and expensive agricultural product. A dehydration treatment is necessary to convert Crocus sativus L. stigmas into saffron spice. To the best of our knowledge, no information on mass trans...Saffron is the most precious and expensive agricultural product. A dehydration treatment is necessary to convert Crocus sativus L. stigmas into saffron spice. To the best of our knowledge, no information on mass transfer parameters of saffron stigmas is available in the literature. This study aimed at investigating the moisture transfer parameters and quality attributes of saffron stigmas under infrared treatment at different temperatures（60,70, …, 110 ℃）. It was observed that the dehydration process of the samples occurred in a short accelerating rate period at the start followed by a falling rate period. The effective moisture diffusivity and convective mass transfer coefficient were determined by using the Dincer and Dost model. The diffusivity values varied from1.1103 × 10^-10m^2·s^-1to 4.1397 × 10^-10m^2·s^-1 and mass transfer coefficient varied in the range of 2.6433 × 10^-7–8.7203 × 10^-7m·s^-1. The activation energy was obtained to be 27.86 kJ·mol^-1. The quality assessment results showed that the total crocin content increased, when the temperature increased up to90 ℃ but, in higher temperatures, the amount of crocin decreased slightly. The total safranal content of the samples decreased slightly when drying temperature increased from 60 ℃ to 70 ℃ and then continuously increased up to 110 ℃. Also, the amount of picrocrocin increased from 83.1 to 93.3 as the drying temperature increased from 60 ℃ to 100 ℃.展开更多
基金Projects(51323014,51479097,51279086)supported by the National Natural Science Foundation of ChinaProject(2016-KY-2)supported by the State Key Laboratory of Hydroscience and Hydraulic Engineering,China
文摘Reservoir impoundment is related to several hydraulic engineering concerns,including irreversible valley contractions,landslides and reservoir-induced earthquakes.However,these phenomena,such as valley contractions,are hardly to be explained by the conventional method.The scientific understanding of water effects during impoundment and their hazards to hydraulic structure are needed.The effective stress law for fissured rock masses is introduced in the elasto-plastic model employing the Drucker-Prager criterion and implemented in the three dimension(3D)nonlinear finite element method(FEM)program Three-dimensional FINite Element(TFINE).The slope deforms towards river-way during impoundment since the increasing pore pressure in fissures changes stress state and leads to additional plastic deformation in the rock materials.The value of Biot coefficient and the influence of water on rock materials are discussed in detail.Thus,the mechanism of slope deformation during the impoundment of Jinping-I arch dam is revealed,and the deformation is accurately measured.The application of the effective stress law provides a method to consider stress assessment,deformation evaluation and stability estimate of hydraulic structures during the impoundment process.This is a beneficial exploration and an improvement of hydraulic engineering design.
文摘Saffron is the most precious and expensive agricultural product. A dehydration treatment is necessary to convert Crocus sativus L. stigmas into saffron spice. To the best of our knowledge, no information on mass transfer parameters of saffron stigmas is available in the literature. This study aimed at investigating the moisture transfer parameters and quality attributes of saffron stigmas under infrared treatment at different temperatures（60,70, …, 110 ℃）. It was observed that the dehydration process of the samples occurred in a short accelerating rate period at the start followed by a falling rate period. The effective moisture diffusivity and convective mass transfer coefficient were determined by using the Dincer and Dost model. The diffusivity values varied from1.1103 × 10^-10m^2·s^-1to 4.1397 × 10^-10m^2·s^-1 and mass transfer coefficient varied in the range of 2.6433 × 10^-7–8.7203 × 10^-7m·s^-1. The activation energy was obtained to be 27.86 kJ·mol^-1. The quality assessment results showed that the total crocin content increased, when the temperature increased up to90 ℃ but, in higher temperatures, the amount of crocin decreased slightly. The total safranal content of the samples decreased slightly when drying temperature increased from 60 ℃ to 70 ℃ and then continuously increased up to 110 ℃. Also, the amount of picrocrocin increased from 83.1 to 93.3 as the drying temperature increased from 60 ℃ to 100 ℃.
