期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
有机/无机杂合物(C_nH_(2n+1)NH_3)_2PbX_4的表征
1
作者 史昆玉 刘韩星 《武汉工程大学学报》 CAS 2009年第3期66-69,共4页
合成了具有层状钙钛矿结构的有机/无机杂合物(CnH2n+1NH3)2PbX4(其中X=Cl,Br,I;n=2,4,6,8,10),采用X射线衍射对产物的结构进行了表征,结果表明,层间距d值随着有机组元中碳链长度的增加而增加,而卤素阴离子的半径大小对层间距的影响较小... 合成了具有层状钙钛矿结构的有机/无机杂合物(CnH2n+1NH3)2PbX4(其中X=Cl,Br,I;n=2,4,6,8,10),采用X射线衍射对产物的结构进行了表征,结果表明,层间距d值随着有机组元中碳链长度的增加而增加,而卤素阴离子的半径大小对层间距的影响较小.采用红外光谱对产物(C6H13NH3)2PbI4的结构进行表征,结果表明在产物中已经引入了有机组分正己胺,但可能由于胺基质子化的影响,使其结构与自由的C6H13NH2相比具有不同的特征. 展开更多
关键词 有机/无机杂合物 钙钛矿 层间距
下载PDF
(C_8H_(17)NH_3)_2PbI_4薄膜的制备和发光特性研究 被引量:1
2
作者 史昆玉 刘韩星 《武汉工程大学学报》 CAS 2008年第3期94-96,共3页
采用旋涂法制备了具有层状钙钛矿结构的有机/无机杂合物(C8H17NH3)2PbI4薄膜,X射线衍射结果表明该材料具有规则的层状结构.采用原子力显微镜(AFM)观察了薄膜的表面形貌.利用紫外——可见吸收光谱和荧光光谱进行研究,室温下薄膜显示了强... 采用旋涂法制备了具有层状钙钛矿结构的有机/无机杂合物(C8H17NH3)2PbI4薄膜,X射线衍射结果表明该材料具有规则的层状结构.采用原子力显微镜(AFM)观察了薄膜的表面形貌.利用紫外——可见吸收光谱和荧光光谱进行研究,室温下薄膜显示了强烈、尖锐的激子吸收峰,且在可见光范围内显示了强烈的光致发光. 展开更多
关键词 有机/无机杂合物 钙钛矿 光致发光
下载PDF
Crystallographic Characterization of the Novel Inorganic-organic Hybrid Coordinated Polymer: [(C_(22)H_(50)N_2)(Ag_2I_4)]_n
3
作者 李浩宏 陈之荣 +2 位作者 黄长沧 肖光参 任永刚 《Chinese Journal of Structural Chemistry》 SCIE CAS CSCD 北大核心 2004年第9期1009-1012,共4页
A novel coordinated polymer [(C22H50N2)(Ag2I4)]n([C22H50N2]2+ = N,N?-1,2- ethylence-bis(N,N?-dimethyl octane ammonium) (EDO)) was synthesized by the reaction of AgI and EDO at room temperature with pH = 6.8, and struc... A novel coordinated polymer [(C22H50N2)(Ag2I4)]n([C22H50N2]2+ = N,N?-1,2- ethylence-bis(N,N?-dimethyl octane ammonium) (EDO)) was synthesized by the reaction of AgI and EDO at room temperature with pH = 6.8, and structurally characterized by means of X-ray single- crystal diffraction. It crystallizes in triclinic, space group P1 with a = 9.6080(1), b = 12.7643(2), c = 7.2157(8) ? a = 100.835(8), ?= 91.030(3), ? = 91.297(9)o, (C21.50H48.50Ag2I4N2), Mr = 1058.46, V = 868.71(19) 3, Z = 1, Dc = 2.023g/cm3, F(000) = 497.5, ?MoKa) = 4.692 mm-1, the final R = 0.0623 and wR = 0.1949 for 2641 observed reflections with I > 2s(I). The title compound consists of cations ([C22H50N2]2+) and anion chain (Ag2I42-)∞ which are combined by static attracting forces in the crystal to form the so-called organic-inorganic hybrid material. 展开更多
关键词 coordination polymers template synthesis IODIDE quaternary ammonium
下载PDF
Polarized Electronic Spectra of Organic/Inorganic Hybrid Materials of Chiral Schiff Base Ni(ll) or Cu(ll) Complexes and Disperse Red 1 or Azobenzene in PMMA Films
4
作者 Takashiro Akitsu Yukie Miura 《Journal of Chemistry and Chemical Engineering》 2011年第5期443-450,共8页
We have prepared new chiral Schiff base complexes, and copper(Ⅱ) (2) to investigate steric effect of ligands for 1 and bis(N-R-l-phenylethyl-5- methoxysalicydenaminato) nickel(Ⅱ) (1) 2 and known bis(N-R-l... We have prepared new chiral Schiff base complexes, and copper(Ⅱ) (2) to investigate steric effect of ligands for 1 and bis(N-R-l-phenylethyl-5- methoxysalicydenaminato) nickel(Ⅱ) (1) 2 and known bis(N-R-l-phenylethyl-3,5-dichlorosalicydenaminato) nickel(Ⅱ) (3) and copper(Ⅱ) (4). By using two kinds of photochromic dyes, disperse red 1 (DRI) and azobenzene (AZ), we investigated the efficiency of increasing optical anisotropy of organic/inorganic hybrid materials of 1 through 4+AZ or DRI+PMMA in polymethylmethacrylate (PMMA) cast films by Weigert effect (and compared with cis-trans isomerization by alternate UV and visible light for 3 and 4 to previous study). Gradual increase of optical anisotropy was observed for all the hybrid materials regardless of flexibility of Schiff base complexes, and the degree of dichroism and weak intermolecular interactions were discussed based on polarized absorption electronic spectra. 展开更多
关键词 PHOTOCHROMISM CHIRALITY polarized light metal complexes Schiff base.
下载PDF
Performance of polymer/CdS organic-inorganic hybrid LEDs
5
作者 C.Pradeep S.Mathew +3 位作者 M.A.G.Namboothiry C.P.G.Vallabhan P.Radhakrishnan V.P.N.Nampoori 《Optoelectronics Letters》 EI 2016年第2期110-114,共5页
Organic-inorganic hybrid light emitting diodes(LEDs) were fabricated by incorporating cadmium sulphide(Cd S) nanoparticles in hole transporting layer and light emitting materials of a polymer LED. The Cd S nanoparticl... Organic-inorganic hybrid light emitting diodes(LEDs) were fabricated by incorporating cadmium sulphide(Cd S) nanoparticles in hole transporting layer and light emitting materials of a polymer LED. The Cd S nanoparticles with size of 10 nm were synthesized by precipitation technique. The LEDs incorporated with the Cd S nanoparticles show a reduction in turn on voltage and luminance. When the nanoparticles are incorporated in a suitable fluorene based light emitting polymer, the luminance is increased along with the decrease of turn on voltage. 展开更多
关键词 inorganic incorporated transporting blend cadmium coated hexagonal filtered adding attributed
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部