A kind of white OLED with single luminescent layer was designed, in which rubrene was doped in Liq. The structure of the devices is ITO/PVK:TPD/Liq: Rubrene/Alq3/Al. The brightness of the devices comes to 3120 cd/m2(a...A kind of white OLED with single luminescent layer was designed, in which rubrene was doped in Liq. The structure of the devices is ITO/PVK:TPD/Liq: Rubrene/Alq3/Al. The brightness of the devices comes to 3120 cd/m2(at a driving voltage of 25 V), the CIE coordinates of the typical devices is (0.308,0.347), and the coordinates is very close to the white equi-energy point. The emitting and luminescent characteristics of the devices were discussed.展开更多
A new structure containing negative refractive index dielectric layer（NRlDL） is introduced into microcavity. The properties of the new mierocavity organic light-emitting devices（MOLEDs） are investigated. In the ex...A new structure containing negative refractive index dielectric layer（NRlDL） is introduced into microcavity. The properties of the new mierocavity organic light-emitting devices（MOLEDs） are investigated. In the experiment, the transfer matrix method is adopted. The dependence of reflectance and transmittance on the refractive index and thickness of NRIDL are analyzed in detail. Compared with the electroluminescence spectra of non-NRIDL diodes, the line widths of the spectra of the MOLEDs are narrower and all the peaks enhance. The results show that the new structure is beneficial to improve the performance and reduce the thickness of microcavity devices.展开更多
Blue top-emitting organic light-emitting devices （TEOLEDs） are demonstrated by employing Alq3 as phase shift adjustment layer （PSAL） to increase the phase shift on reflection of the top electrode within a range, w...Blue top-emitting organic light-emitting devices （TEOLEDs） are demonstrated by employing Alq3 as phase shift adjustment layer （PSAL） to increase the phase shift on reflection of the top electrode within a range, which also improves the light out-coupling. By adjusting the thickness of P SAL, the CIEx,y of devices, which utilize 2, 7-Di-pyrenyl-9, 9-spiro-bifluorene （DPSF） as emitting layer, changes from （0.16, 0.50） to （0.18, 0.37）. The maximnum current efficiency of 7.1 cd/A is acquired under 4.5 V with an increasing luminance of 139 cd/m^2. Compared with adjusting the total thickness of organic layer, it is more beneficial for achieving blue TEOLEDs with high efficiency.展开更多
Double-emitting layer inverted organic light-emitting devices(IOLEDs) with different spacer layers were investigated, where 2,20,7,70-tetrakis(carbazol-9-yl)-9,9-spirobifluorene(CBP), 2,9-dimethyl-4,7-diphenyl-1,10-ph...Double-emitting layer inverted organic light-emitting devices(IOLEDs) with different spacer layers were investigated, where 2,20,7,70-tetrakis(carbazol-9-yl)-9,9-spirobifluorene(CBP), 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline(BCP), 4,7-diphenyl-1,10-phenanthroline(Bphen) and 4,40,400-tris(N-carbazolyl)-triphenylamine(TCTA) were used as spacer layers, respectively, and GIr1 and R-4b were used as green and red guest phosphorescent materials, respectively. The results show that the device with BCP spacer layer has the best performance. The maximum current efficiency of the BCP spacer layer device reaches up to 24.15 cd·A^(-1) when the current density is 3.99 m A·cm^(-2), which is 1.23 times bigger than that of the CBP spacer layer device. The performance is better than that of corresponding conventional device observably. The color coordinate of the device with BCP spacer layer only changes from(0.625 1, 0.368 0) to(0.599 5, 0.392 8) when the driving voltage increases from 6 V to 10 V, so it shows good stability in color coordinate, which is due to the adoption of the co-doping evaporation method for cladding luminous layer and the effective restriction of spacer layer to carriers in emitting layer.展开更多
基金National Natural Science Foundation of China(No. 60676033)
文摘A kind of white OLED with single luminescent layer was designed, in which rubrene was doped in Liq. The structure of the devices is ITO/PVK:TPD/Liq: Rubrene/Alq3/Al. The brightness of the devices comes to 3120 cd/m2(at a driving voltage of 25 V), the CIE coordinates of the typical devices is (0.308,0.347), and the coordinates is very close to the white equi-energy point. The emitting and luminescent characteristics of the devices were discussed.
基金Natural Science Research Item of Education Department of Henan Province(2008A430009)Doctor Foundation of Henan Polytechnic University(B2008-22)
文摘A new structure containing negative refractive index dielectric layer（NRlDL） is introduced into microcavity. The properties of the new mierocavity organic light-emitting devices（MOLEDs） are investigated. In the experiment, the transfer matrix method is adopted. The dependence of reflectance and transmittance on the refractive index and thickness of NRIDL are analyzed in detail. Compared with the electroluminescence spectra of non-NRIDL diodes, the line widths of the spectra of the MOLEDs are narrower and all the peaks enhance. The results show that the new structure is beneficial to improve the performance and reduce the thickness of microcavity devices.
文摘Blue top-emitting organic light-emitting devices （TEOLEDs） are demonstrated by employing Alq3 as phase shift adjustment layer （PSAL） to increase the phase shift on reflection of the top electrode within a range, which also improves the light out-coupling. By adjusting the thickness of P SAL, the CIEx,y of devices, which utilize 2, 7-Di-pyrenyl-9, 9-spiro-bifluorene （DPSF） as emitting layer, changes from （0.16, 0.50） to （0.18, 0.37）. The maximnum current efficiency of 7.1 cd/A is acquired under 4.5 V with an increasing luminance of 139 cd/m^2. Compared with adjusting the total thickness of organic layer, it is more beneficial for achieving blue TEOLEDs with high efficiency.
基金supported by the National Natural Science Foundation of China(Nos.61076066 and 61605105)the Shaanxi Science&Technology Development Program(No.2011KTCQ01-09)
文摘Double-emitting layer inverted organic light-emitting devices(IOLEDs) with different spacer layers were investigated, where 2,20,7,70-tetrakis(carbazol-9-yl)-9,9-spirobifluorene(CBP), 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline(BCP), 4,7-diphenyl-1,10-phenanthroline(Bphen) and 4,40,400-tris(N-carbazolyl)-triphenylamine(TCTA) were used as spacer layers, respectively, and GIr1 and R-4b were used as green and red guest phosphorescent materials, respectively. The results show that the device with BCP spacer layer has the best performance. The maximum current efficiency of the BCP spacer layer device reaches up to 24.15 cd·A^(-1) when the current density is 3.99 m A·cm^(-2), which is 1.23 times bigger than that of the CBP spacer layer device. The performance is better than that of corresponding conventional device observably. The color coordinate of the device with BCP spacer layer only changes from(0.625 1, 0.368 0) to(0.599 5, 0.392 8) when the driving voltage increases from 6 V to 10 V, so it shows good stability in color coordinate, which is due to the adoption of the co-doping evaporation method for cladding luminous layer and the effective restriction of spacer layer to carriers in emitting layer.
