By means of the synthetic approach of non－polar or weak polar oil－sorbed polymers，the gel sorption resin（GSR） and the multiporous sorption resin（MSR） were prepared．The structure of the resins，sorption power...By means of the synthetic approach of non－polar or weak polar oil－sorbed polymers，the gel sorption resin（GSR） and the multiporous sorption resin（MSR） were prepared．The structure of the resins，sorption power，sorption speed，desorption，and sorption of organic compounds from sewage，exhaust gas and soil were discussed．Moreover，the resins were used to decrease LOD and BOD5 values of water waste from sewage factory．Theyare a klndof potential materials for environmental control．展开更多
Vitamin A ester was synthesized in organic solvents with immobilized lipase from Candida sp. The types of lipases, influences of solvent, the molar ratio of substrates, the reaction temperature and the water activity ...Vitamin A ester was synthesized in organic solvents with immobilized lipase from Candida sp. The types of lipases, influences of solvent, the molar ratio of substrates, the reaction temperature and the water activity in the reaction were studied in detail in order to obtain the optimum conditions for Vitamin A palmitate synthesis. In a system of hexane, 100mg immobilized Candida sp. lipase was used in the presence of 1.2mmol vitamin A acetate and 3.6mmol palmitic acid. The yield of vitamin A palmitate reached 81% in 12h at 25℃. The immobilized Candida sp. lipase was prepared by adsorbing Cand/da sp. fermentation broth on pretreated textile and could be reused for at least six batches.展开更多
The solid Supramolecular complexes of β-cyclodextrin （β-CD） with ethylenediamine 1, diethylenetriamine 2 and triethylamine 3 were obtained and characterized using elemental analysis, powder X-ray diffraction, infr...The solid Supramolecular complexes of β-cyclodextrin （β-CD） with ethylenediamine 1, diethylenetriamine 2 and triethylamine 3 were obtained and characterized using elemental analysis, powder X-ray diffraction, infrared spectroscopy, thermogravimetric analysis, and ^1H nuclear magnetic resonance spectroscopy. Based on the results of elemental analysis and ^1H NMR, the guest-host stoichiometries of the three solid complexes were determined to be 5：2 for 1-β-CD, hl for 2-β-CD, and 1：3 for 3-β-CD. The yields were relative to the molar volume ratio of guest to β-CD cavity, and increased in the order： 1-β-CD〈2-3-CD〈3-β-CD. X-ray diffraction patterns of the inclusion complexes gave very good exhibitions not only in location of diffraction peaks but also in shape and diffraction intensity of the peaks due to the intermolecular complexations between β-CD and the guests. The formation of host-guest inclusion complexes exhibited obviously enhanced phase change temperatures of the complexed guests such as 1 and 3. The H-5 protons located at the narrower rim inside the CD cavity experienced a higher shift upon inclusion while all other protons experienced lower shifts.展开更多
A multiproxy approach including bulk organic carbon, δ^(13) C, lignin phenols, and lipid biomarker analyses were applied to characterize the source and composition of sedimentary organic matter in the head part of Th...A multiproxy approach including bulk organic carbon, δ^(13) C, lignin phenols, and lipid biomarker analyses were applied to characterize the source and composition of sedimentary organic matter in the head part of Three Gorges Reservoir. OM consisted of both natural(autochthonous and allochthonous) and anthropogenic inputs.The natural OM included input from vascular plants,especially non-woody angiosperms. The allochthonous input included plankton and microbial production, likely due to localized eutrophication. Anthropogenic inputs likely derived from petroleum input and/or urban activities.Other anthropogenic inputs were untreated sewage waste.These influences were concluded to be regionally specific point sources of pollution based on relative distributions and on the fact that molecular characteristics of sedimentary OM were not distributed smoothly along a gradient.展开更多
The thermal debinding behavior of stainless steel foam precursor in vacuum was studied and compared with that in hydrogen.The formation cause of pore channel was analyzed.The experiment results show that the binder re...The thermal debinding behavior of stainless steel foam precursor in vacuum was studied and compared with that in hydrogen.The formation cause of pore channel was analyzed.The experiment results show that the binder removal rate in vacuum is higher than that in hydrogen.In vacuum,the organic compounds can be removed effectively without change of pore size and the pore morphology for the sample.After pre-sintering,some sintering necks form and the sample has certain intensity.The initial surface pore forms with the temperature increasing at first,and then the internal melting binder is aspirated to form initial pore because of the capillary force and the metal powders re-arrange with the migration of binder at the same time.展开更多
the desalting property of ion-exchange resins in organic solventis reported by using potassium acetate as a model compound. Theexperimental results show that solvability of the solvent, stirringspeed, and temperature ...the desalting property of ion-exchange resins in organic solventis reported by using potassium acetate as a model compound. Theexperimental results show that solvability of the solvent, stirringspeed, and temperature are the factors which influence theion-exchange rate. The increase of solvability, stirring speed andtemperature will speed up the ion-exchange process.展开更多
文摘By means of the synthetic approach of non－polar or weak polar oil－sorbed polymers，the gel sorption resin（GSR） and the multiporous sorption resin（MSR） were prepared．The structure of the resins，sorption power，sorption speed，desorption，and sorption of organic compounds from sewage，exhaust gas and soil were discussed．Moreover，the resins were used to decrease LOD and BOD5 values of water waste from sewage factory．Theyare a klndof potential materials for environmental control．
基金Supported by the National Natural Science Foundation of China (No.20325622), Key Technology R&D Programme (No.2001BA708B03-08) and 863 Hi-Technology Research and Development Program of China (No. 2002AA514030).
文摘Vitamin A ester was synthesized in organic solvents with immobilized lipase from Candida sp. The types of lipases, influences of solvent, the molar ratio of substrates, the reaction temperature and the water activity in the reaction were studied in detail in order to obtain the optimum conditions for Vitamin A palmitate synthesis. In a system of hexane, 100mg immobilized Candida sp. lipase was used in the presence of 1.2mmol vitamin A acetate and 3.6mmol palmitic acid. The yield of vitamin A palmitate reached 81% in 12h at 25℃. The immobilized Candida sp. lipase was prepared by adsorbing Cand/da sp. fermentation broth on pretreated textile and could be reused for at least six batches.
文摘The solid Supramolecular complexes of β-cyclodextrin （β-CD） with ethylenediamine 1, diethylenetriamine 2 and triethylamine 3 were obtained and characterized using elemental analysis, powder X-ray diffraction, infrared spectroscopy, thermogravimetric analysis, and ^1H nuclear magnetic resonance spectroscopy. Based on the results of elemental analysis and ^1H NMR, the guest-host stoichiometries of the three solid complexes were determined to be 5：2 for 1-β-CD, hl for 2-β-CD, and 1：3 for 3-β-CD. The yields were relative to the molar volume ratio of guest to β-CD cavity, and increased in the order： 1-β-CD〈2-3-CD〈3-β-CD. X-ray diffraction patterns of the inclusion complexes gave very good exhibitions not only in location of diffraction peaks but also in shape and diffraction intensity of the peaks due to the intermolecular complexations between β-CD and the guests. The formation of host-guest inclusion complexes exhibited obviously enhanced phase change temperatures of the complexed guests such as 1 and 3. The H-5 protons located at the narrower rim inside the CD cavity experienced a higher shift upon inclusion while all other protons experienced lower shifts.
基金supported by the"100"talent program of Zhejiang University to D.He under the Grant No.188020*194231701/008 and188020-193810201/102NSFC to Y.Sun under the Grant No.41372131
文摘A multiproxy approach including bulk organic carbon, δ^(13) C, lignin phenols, and lipid biomarker analyses were applied to characterize the source and composition of sedimentary organic matter in the head part of Three Gorges Reservoir. OM consisted of both natural(autochthonous and allochthonous) and anthropogenic inputs.The natural OM included input from vascular plants,especially non-woody angiosperms. The allochthonous input included plankton and microbial production, likely due to localized eutrophication. Anthropogenic inputs likely derived from petroleum input and/or urban activities.Other anthropogenic inputs were untreated sewage waste.These influences were concluded to be regionally specific point sources of pollution based on relative distributions and on the fact that molecular characteristics of sedimentary OM were not distributed smoothly along a gradient.
基金Project(50974136)supported by the National Natural Science Foundation of ChinaProject(CX2009B037)supported by the Graduate Degree Thesis Innovation Foundation of Central South University,China
文摘The thermal debinding behavior of stainless steel foam precursor in vacuum was studied and compared with that in hydrogen.The formation cause of pore channel was analyzed.The experiment results show that the binder removal rate in vacuum is higher than that in hydrogen.In vacuum,the organic compounds can be removed effectively without change of pore size and the pore morphology for the sample.After pre-sintering,some sintering necks form and the sample has certain intensity.The initial surface pore forms with the temperature increasing at first,and then the internal melting binder is aspirated to form initial pore because of the capillary force and the metal powders re-arrange with the migration of binder at the same time.
文摘the desalting property of ion-exchange resins in organic solventis reported by using potassium acetate as a model compound. Theexperimental results show that solvability of the solvent, stirringspeed, and temperature are the factors which influence theion-exchange rate. The increase of solvability, stirring speed andtemperature will speed up the ion-exchange process.
