Micro/nano-thin films are widely used in the fields of micro/nano-electromechanical system(MEMS/NEMS)and flexible electronics,and their mechanical properties have an important impact on the stability and reliability o...Micro/nano-thin films are widely used in the fields of micro/nano-electromechanical system(MEMS/NEMS)and flexible electronics,and their mechanical properties have an important impact on the stability and reliability of components.However,accurate characterization of the mechanical properties of thin films still faces challenges due to the complexity of film-substrate structure,and the characterization efficiency of traditional techniques is insufficient.In this paper,a high-throughput determination method of the elastic modulus of thin films is proposed based on the strain variance method,the feasibility of which is analyzed by the finite element method(FEM),and the specific tensile configuration with array-distributed thin films is designed and optimized.Based on the strain difference between the film-substrate region and the uncoated region,the elastic modulus of multiple films is obtained simultaneously,and the influences of film width,spacing,thickness,and distribution on the measurement of elastic modulus are elucidated.The results show that the change in film width has a more obvious effect on the elastic modulus determination than film spacing and thickness,i.e.,the larger the film width is,the closer the calculation results are to the theoretical value,and the change in calculation results tends to be stabilized when the film width increases to a certain length.Specifically,the simultaneous measurement of the elastic modulus of eight metal films on a polyimide(PI)substrate with a length of 110 mm and a width of 30 mm can be realized,and the testing throughput can be further increased with the extension of the substrate length.This study provides an efficient and low-cost method for measuring the elastic modulus of thin films,which is expected to accelerate the development of new thin film materials.展开更多
Hydrogen peroxide(H_(2)O_(2))has gained widespread attention as a versatile oxidant and a mild disin-fectant.Here,an electrostatic self-assembly method is applied to couple ZnSe quantum dots(QDs)with a flower-like cov...Hydrogen peroxide(H_(2)O_(2))has gained widespread attention as a versatile oxidant and a mild disin-fectant.Here,an electrostatic self-assembly method is applied to couple ZnSe quantum dots(QDs)with a flower-like covalent organic framework(COF)to form a step-scheme(S-scheme)photocata-lyst for H_(2)O_(2)production.The as-prepared S-scheme photocatalyst exhibits a broad light absorption range with an edge at 810 nm owing to the synergistic effect between the ZnSe QDs and COF.The S-scheme charge-carrier transfer mechanism is validated by performing Fermi level calculations and in-situ X-ray photoelectron and femtosecond transient absorption spectroscopies.Photolumi-nescence,time-resolved photoluminescence,photocurrent response,electrochemical impedance spectroscopy,and electron paramagnetic resonance results show that the S-scheme heterojunction not only promotes charge carrier separation but also boosts the redox ability,resulting in enhanced photocatalytic performance.Remarkably,a 10%-ZnSe QD/COF has excellent photocatalytic H_(2)O_(2)-production activity,and the optimal S-scheme composite with ethanol as the hole scavenger yields a H_(2)O_(2)-production rate of 1895 mol g^(-1)h^(-1).This study presents an example of a high-performance organic/inorganic S-scheme photocatalyst for H_(2)O_(2)production.展开更多
[Objective]The aim was to provide a scientific basis for the reasonable application of organic fertilizer to improve lodging resistance and yield of rice.[Method]The application of four different kinds of organic fert...[Objective]The aim was to provide a scientific basis for the reasonable application of organic fertilizer to improve lodging resistance and yield of rice.[Method]The application of four different kinds of organic fertilizer was applied to study their effects on rice lodging resistance and yield of late rice Yuzhengxiang that with high quality.[Result] The effect of applying organic fertilizer for improving rice lodging resistance capability was:biogas residues> chicken manure > rapeseed cake> tobac...展开更多
In order to determine the regulations of the development of taxi supply under entry regulations in Chinese cities, an improved neural network model is applied to find the particular years when the government artificia...In order to determine the regulations of the development of taxi supply under entry regulations in Chinese cities, an improved neural network model is applied to find the particular years when the government artificially puts new taxis into the market, and then extract the political influence from the taxi supply. The model is also utilized to study the relationships between the adjusted taxi supply and non-policy factors. A case study of Nanjing city is conducted. The results show that 2001 and 2007 are the particular years that the Nanjing government artificially put new taxis into its taxi market, which is in accordance with the five-year plan of China and the local development plans. The results also show that the improved neural network model has a good performance in expositing the evolution of adjusted taxi supply related to non-policy factors.展开更多
A compact drain current including the variation of barrier heights and carrier quantization in ultrathin-body and double-gate Schottky barrier MOSFETs （UTBDG SBFETs） is developed. In this model, Schrodinger＇s equat...A compact drain current including the variation of barrier heights and carrier quantization in ultrathin-body and double-gate Schottky barrier MOSFETs （UTBDG SBFETs） is developed. In this model, Schrodinger＇s equation is solved using the triangular potential well approximation. The carrier density thus obtained is included in the space charge density to obtain quantum carrier confinement effects in the modeling of thin-body devices. Due to the quantum effects, the first subband is higher than the conduction band edge, which is equivalent to the band gap widening. Thus, the barrier heights at the source and drain increase and the carrier concentration decreases as the drain current decreases. The drawback of the existing models,which cannot present an accurate prediction of the drain current because they mainly consider the effects of Schottky barrier lowering （SBL） due to image forces,is eliminated. Our research results suggest that for small nonnegative Schottky barrier （SB） heights,even for zero barrier height, the tunneling current also plays a role in the total on-state currents. Verification of the present model was carried out by the device numerical simulator-Silvaco and showed good agreement.展开更多
The effect of structure,elastic modulus and thickness of lower modulus layer in porous titanium implants on the stress distribution at the implant-bone interface was investigated.Three-dimensional finite element model...The effect of structure,elastic modulus and thickness of lower modulus layer in porous titanium implants on the stress distribution at the implant-bone interface was investigated.Three-dimensional finite element models of different titanium implants were constructed.The structures of the implants included the whole lower modulus style （No.1）,bio-mimetic style （No.2）,the whole lower modulus style in cancellous bone （No.3） and the whole dense style No.4.The stress distributions at bone-implant interface under static loading were analyzed using Ansys Workbench 10.0 software.The results indicated that the distribution of interface stress is strongly depended on the structure of the implants.The maximum stresses in cancellous bone and root region of implant No.2 are lower than those in the other three implants.A decrease in the modulus of the low modulus layer facilitates the interface stress transferring.Increasing the thickness of the low modulus layer can reduce the stress and induce a more uniform stress distribution at the interface.Among the four implants,biomimetic style implant No.2 is superior in transferring implant-bone interface stress to surrounding bones.展开更多
Scalar CSAMT is only suitable for measurements in one and two dimensions perpendicular to geological structures. For complex 3D geoelectric structure, tensor CSAMT is more suitable. In this paper, we discuss 3D tensor...Scalar CSAMT is only suitable for measurements in one and two dimensions perpendicular to geological structures. For complex 3D geoelectric structure, tensor CSAMT is more suitable. In this paper, we discuss 3D tensor CSAMT forward modeling using the vector finite-element method. To verify the feasibility of the algorithm, we calculate the electric field, magnetic field, and tensor impedance of the 3D CSAMT far-zone field in layered media and compare them with theoretical solutions. In addition, a three-dimensional anomaly in half-space is also simulated, and the response characteristics of the impedance tensor and the apparent resistivity and impedance phase are analyzed. The results suggest that the vector finite-element method produces high-precision electromagnetic field and impedance tensor data, satisfies the electric field discontinuity, and does not require divergence correction using the vector finite-element method.展开更多
An energy-efficient heuristic mechanism is presented to obtain the optimal solution for the coverage problem in sensor networks. The mechanism can ensure that all targets are fully covered corresponding to their level...An energy-efficient heuristic mechanism is presented to obtain the optimal solution for the coverage problem in sensor networks. The mechanism can ensure that all targets are fully covered corresponding to their levels of importance at minimum cost, and the ant colony optimization algorithm （ACO） is adopted to achieve the above metrics. Based on the novel design of heuristic factors, artificial ants can adaptively detect the energy status and coverage ability of sensor networks via local information. By introducing the evaluation function to global pheromone updating rule, the pheromone trail on the best solution is greatly enhanced, so that the convergence process of the algorithm is speed up. Finally, the optimal solution with a higher coverage- efficiency and a longer lifetime is obtained.展开更多
文摘Micro/nano-thin films are widely used in the fields of micro/nano-electromechanical system(MEMS/NEMS)and flexible electronics,and their mechanical properties have an important impact on the stability and reliability of components.However,accurate characterization of the mechanical properties of thin films still faces challenges due to the complexity of film-substrate structure,and the characterization efficiency of traditional techniques is insufficient.In this paper,a high-throughput determination method of the elastic modulus of thin films is proposed based on the strain variance method,the feasibility of which is analyzed by the finite element method(FEM),and the specific tensile configuration with array-distributed thin films is designed and optimized.Based on the strain difference between the film-substrate region and the uncoated region,the elastic modulus of multiple films is obtained simultaneously,and the influences of film width,spacing,thickness,and distribution on the measurement of elastic modulus are elucidated.The results show that the change in film width has a more obvious effect on the elastic modulus determination than film spacing and thickness,i.e.,the larger the film width is,the closer the calculation results are to the theoretical value,and the change in calculation results tends to be stabilized when the film width increases to a certain length.Specifically,the simultaneous measurement of the elastic modulus of eight metal films on a polyimide(PI)substrate with a length of 110 mm and a width of 30 mm can be realized,and the testing throughput can be further increased with the extension of the substrate length.This study provides an efficient and low-cost method for measuring the elastic modulus of thin films,which is expected to accelerate the development of new thin film materials.
文摘Hydrogen peroxide(H_(2)O_(2))has gained widespread attention as a versatile oxidant and a mild disin-fectant.Here,an electrostatic self-assembly method is applied to couple ZnSe quantum dots(QDs)with a flower-like covalent organic framework(COF)to form a step-scheme(S-scheme)photocata-lyst for H_(2)O_(2)production.The as-prepared S-scheme photocatalyst exhibits a broad light absorption range with an edge at 810 nm owing to the synergistic effect between the ZnSe QDs and COF.The S-scheme charge-carrier transfer mechanism is validated by performing Fermi level calculations and in-situ X-ray photoelectron and femtosecond transient absorption spectroscopies.Photolumi-nescence,time-resolved photoluminescence,photocurrent response,electrochemical impedance spectroscopy,and electron paramagnetic resonance results show that the S-scheme heterojunction not only promotes charge carrier separation but also boosts the redox ability,resulting in enhanced photocatalytic performance.Remarkably,a 10%-ZnSe QD/COF has excellent photocatalytic H_(2)O_(2)-production activity,and the optimal S-scheme composite with ethanol as the hole scavenger yields a H_(2)O_(2)-production rate of 1895 mol g^(-1)h^(-1).This study presents an example of a high-performance organic/inorganic S-scheme photocatalyst for H_(2)O_(2)production.
基金Supported by Project of Science & Technology of Grain Yield of China(2004BA520A01)~~
文摘[Objective]The aim was to provide a scientific basis for the reasonable application of organic fertilizer to improve lodging resistance and yield of rice.[Method]The application of four different kinds of organic fertilizer was applied to study their effects on rice lodging resistance and yield of late rice Yuzhengxiang that with high quality.[Result] The effect of applying organic fertilizer for improving rice lodging resistance capability was:biogas residues> chicken manure > rapeseed cake> tobac...
基金The National Basic Research Program of China(973 Program)(No.2012CB725400)
文摘In order to determine the regulations of the development of taxi supply under entry regulations in Chinese cities, an improved neural network model is applied to find the particular years when the government artificially puts new taxis into the market, and then extract the political influence from the taxi supply. The model is also utilized to study the relationships between the adjusted taxi supply and non-policy factors. A case study of Nanjing city is conducted. The results show that 2001 and 2007 are the particular years that the Nanjing government artificially put new taxis into its taxi market, which is in accordance with the five-year plan of China and the local development plans. The results also show that the improved neural network model has a good performance in expositing the evolution of adjusted taxi supply related to non-policy factors.
文摘A compact drain current including the variation of barrier heights and carrier quantization in ultrathin-body and double-gate Schottky barrier MOSFETs （UTBDG SBFETs） is developed. In this model, Schrodinger＇s equation is solved using the triangular potential well approximation. The carrier density thus obtained is included in the space charge density to obtain quantum carrier confinement effects in the modeling of thin-body devices. Due to the quantum effects, the first subband is higher than the conduction band edge, which is equivalent to the band gap widening. Thus, the barrier heights at the source and drain increase and the carrier concentration decreases as the drain current decreases. The drawback of the existing models,which cannot present an accurate prediction of the drain current because they mainly consider the effects of Schottky barrier lowering （SBL） due to image forces,is eliminated. Our research results suggest that for small nonnegative Schottky barrier （SB） heights,even for zero barrier height, the tunneling current also plays a role in the total on-state currents. Verification of the present model was carried out by the device numerical simulator-Silvaco and showed good agreement.
基金Project(30770576) supported by the National Natural Science Foundation of ChinaProject(2007AA03Z114) supported by Hi-tech Research and Development Program of ChinaProject supported by State Key Laboratory of Powder Metallurgy,China
文摘The effect of structure,elastic modulus and thickness of lower modulus layer in porous titanium implants on the stress distribution at the implant-bone interface was investigated.Three-dimensional finite element models of different titanium implants were constructed.The structures of the implants included the whole lower modulus style （No.1）,bio-mimetic style （No.2）,the whole lower modulus style in cancellous bone （No.3） and the whole dense style No.4.The stress distributions at bone-implant interface under static loading were analyzed using Ansys Workbench 10.0 software.The results indicated that the distribution of interface stress is strongly depended on the structure of the implants.The maximum stresses in cancellous bone and root region of implant No.2 are lower than those in the other three implants.A decrease in the modulus of the low modulus layer facilitates the interface stress transferring.Increasing the thickness of the low modulus layer can reduce the stress and induce a more uniform stress distribution at the interface.Among the four implants,biomimetic style implant No.2 is superior in transferring implant-bone interface stress to surrounding bones.
基金supported by the National Natural Science Foundation of China(No.41104068)the Deep Exploration in China,Sino Probe-03-05
文摘Scalar CSAMT is only suitable for measurements in one and two dimensions perpendicular to geological structures. For complex 3D geoelectric structure, tensor CSAMT is more suitable. In this paper, we discuss 3D tensor CSAMT forward modeling using the vector finite-element method. To verify the feasibility of the algorithm, we calculate the electric field, magnetic field, and tensor impedance of the 3D CSAMT far-zone field in layered media and compare them with theoretical solutions. In addition, a three-dimensional anomaly in half-space is also simulated, and the response characteristics of the impedance tensor and the apparent resistivity and impedance phase are analyzed. The results suggest that the vector finite-element method produces high-precision electromagnetic field and impedance tensor data, satisfies the electric field discontinuity, and does not require divergence correction using the vector finite-element method.
基金The Natural Science Foundation of Jiangsu Province(NoBK2005409)
文摘An energy-efficient heuristic mechanism is presented to obtain the optimal solution for the coverage problem in sensor networks. The mechanism can ensure that all targets are fully covered corresponding to their levels of importance at minimum cost, and the ant colony optimization algorithm （ACO） is adopted to achieve the above metrics. Based on the novel design of heuristic factors, artificial ants can adaptively detect the energy status and coverage ability of sensor networks via local information. By introducing the evaluation function to global pheromone updating rule, the pheromone trail on the best solution is greatly enhanced, so that the convergence process of the algorithm is speed up. Finally, the optimal solution with a higher coverage- efficiency and a longer lifetime is obtained.
