The aim of the research was to connect two methods of the chemical control. The first chemical treatments were applied according to the signalling method. The second method was applied according to the phonological cr...The aim of the research was to connect two methods of the chemical control. The first chemical treatments were applied according to the signalling method. The second method was applied according to the phonological criterion i.e., on the basis of the values of effective temperatures sums or heat sums for cutworms. The studies on cutworms infesting sugar beet crops were carried out in the years 2005-2008. The observation performed during the moth flights from May to September included two species, turnip moth （Agrotis segetum Den. ＆ Schiff.） and heart-and-dart moth （A. exclamationis L.）. The dynamics of moth flights was recorded in reference to readings of climatic conditions registered with the field meteorological stations set up near the light traps. Observations on cutworm occurrence during the vegetation season were done every 5-7 days. Moreover, additional studies were conducted under control conditions in the growth chambers at three programmed temperatures （17°C, 20 °C, 24 °C） and relative humidity （50%-70%）. Based on the results the values for the heat sum of 501.1 °C and effective temperatures sum of 230.0 °C were determined for the developmental stages of cutworm. On the base of the results obtained it can be stated that the improved method of short-term forecasting can be an alternative solution in the integrated protection management against pest.展开更多
A numerical study of a standing-wave thermoacoustic engine is presented. The aim of this work is to study the effect of increasing the heat exchangers length on the acoustic power. The analysis of the flow and the pre...A numerical study of a standing-wave thermoacoustic engine is presented. The aim of this work is to study the effect of increasing the heat exchangers length on the acoustic power. The analysis of the flow and the prediction of the heat transfer are performed by solving the non linear unsteady Navier-Stocks equations using the finite volume method implemented in -ANSYS CFX- CFD code. The results show an increase in the limit cycle acoustic pressure and power as well as the specific work per cycle with the increase of heat exchangers length.展开更多
文摘The aim of the research was to connect two methods of the chemical control. The first chemical treatments were applied according to the signalling method. The second method was applied according to the phonological criterion i.e., on the basis of the values of effective temperatures sums or heat sums for cutworms. The studies on cutworms infesting sugar beet crops were carried out in the years 2005-2008. The observation performed during the moth flights from May to September included two species, turnip moth （Agrotis segetum Den. ＆ Schiff.） and heart-and-dart moth （A. exclamationis L.）. The dynamics of moth flights was recorded in reference to readings of climatic conditions registered with the field meteorological stations set up near the light traps. Observations on cutworm occurrence during the vegetation season were done every 5-7 days. Moreover, additional studies were conducted under control conditions in the growth chambers at three programmed temperatures （17°C, 20 °C, 24 °C） and relative humidity （50%-70%）. Based on the results the values for the heat sum of 501.1 °C and effective temperatures sum of 230.0 °C were determined for the developmental stages of cutworm. On the base of the results obtained it can be stated that the improved method of short-term forecasting can be an alternative solution in the integrated protection management against pest.
文摘A numerical study of a standing-wave thermoacoustic engine is presented. The aim of this work is to study the effect of increasing the heat exchangers length on the acoustic power. The analysis of the flow and the prediction of the heat transfer are performed by solving the non linear unsteady Navier-Stocks equations using the finite volume method implemented in -ANSYS CFX- CFD code. The results show an increase in the limit cycle acoustic pressure and power as well as the specific work per cycle with the increase of heat exchangers length.
