Aim To prepare and characterize solid dispersions of silymarin with the intention of improving their dissolution properties. Methods The solid dispersions were prepared by the fusion method with polyethylene glycol ...Aim To prepare and characterize solid dispersions of silymarin with the intention of improving their dissolution properties. Methods The solid dispersions were prepared by the fusion method with polyethylene glycol 6000(PEG 6000) as the carrier. Evaluation of the properties of the dispersions was performed using dissolution studies, X ray powder diffraction and Fourier transform infrared (FT IR) spectroscopy. Results The rate of dissolution of silymarin was considerably improved as compared with pure silymarin when formulated in solid dispersions with PEG 6000. The data of the X ray diffraction showed some changes in the parameters of lattice spacing [ d ], peak position and relative intensities. FT IR together with those from X ray diffraction showed the absence of well defined drug polymer interactions. Conclusion The dissolution improvement of poorly soluble silymarin could be illuminated by the changes of the lattice parameters of PEG 6000 and the drug.展开更多
Objective: To estimate the prevalence rates of neural tube defects (NTDs) in Heshun County, Shanxi Province, China by Bayesian smoothing technique. Methods: A total of 80 infants in the study area who were diagnosed w...Objective: To estimate the prevalence rates of neural tube defects (NTDs) in Heshun County, Shanxi Province, China by Bayesian smoothing technique. Methods: A total of 80 infants in the study area who were diagnosed with NTDs were analyzed. Two mapping techniques were then used. Firstly, the GIS software ArcGIS was used to map the crude prevalence rates. Secondly, the data were smoothed by the method of empirical Bayes estimation. Results: The classical statistical approach produced an extremely dishomogeneous map, while the Bayesian map was much smoother and more interpretable. The maps produced by the Bayesian technique indicate the tendency of villages in the southeastern region to produce higher prevalence or risk values. Conclusions: The Bayesian smoothing technique addresses the issue of heterogeneity in the population at risk and it is therefore recommended for use in explorative mapping of birth defects. This approach provides procedures to identify spatial health risk levels and assists in generating hypothesis that will be investigated in further detail.展开更多
Magnesium oxysulfate （MgSO4·5Mg（OH）2·2H2O） flake powders with an average diameter of 2 ~tm and a thickness of 0.052 μm were prepared using magnesium sulfate and sodium hydroxide as raw materials by hydr...Magnesium oxysulfate （MgSO4·5Mg（OH）2·2H2O） flake powders with an average diameter of 2 ~tm and a thickness of 0.052 μm were prepared using magnesium sulfate and sodium hydroxide as raw materials by hydrothermal synthesis process. The composition, morphology and structural features of the hydrothermal products were examined with X-ray powder diffraction （XRD）, scanning electron microscopy （SEM） and Fourier transform infrared spectroscopy （FTIR）. The experimental results indicate that in the conditions of n（NaOH）/n（MgSO4） of 1.25, the dosage of w（Na3PO4） crystal additives of 1.0% w（MgSO4）, stirring for 5 h at 180 ℃, the morphology of MgSO4·5Mg（OH）2·2H2O products is flaky and laminar, which is a kind of complex magnesium singlecrystal. The recycling of MgSO4 mother liquor was also investigated to make a full use of the materials and reduce disposal. The results prove that there is no adverse effect on the yield and purity of the products.展开更多
Nanoscale europium（Ⅲ） metal-organic frameworks, Eu（BTC）（H20）.DMF, were synthesized by rapid microwave-assisted method. The components of the as-prepared products were confirmed by the elemental analysis, X-ray ...Nanoscale europium（Ⅲ） metal-organic frameworks, Eu（BTC）（H20）.DMF, were synthesized by rapid microwave-assisted method. The components of the as-prepared products were confirmed by the elemental analysis, X-ray powder diffraction （XRD）, thermal gravimetric analysis （TGA） and Fourier-transform infrared spectra （FTIR） analyses. Eu（BTC）（H20）.DMF with various morphologies, including particle-like, rod-like, straw-sheaf-like nanostructures, could be simply prepared by con- trolling the concentrations of the starting reactants. The optical measurements on the obtained Eu（BTC）（H20）- DMF indicated that all the nanomaterials show the characteristic emissions of the Eu3＋ ions at 578, 590, 612, 650, and 699 nm, which were at- tributed to 5Do→7FJ （J=0-4） transitions of the Eu3＋ ion, respectively. It was also noticed that the luminescent properties of the as-prepared products were heavily dependent on the morphologies and sizes of the nanomaterials. The assembled straw-sheaf-like architectures displayed the strongest emissions and the longest luminescence lifetime, which was mainly due to the fewest surface defects.展开更多
文摘Aim To prepare and characterize solid dispersions of silymarin with the intention of improving their dissolution properties. Methods The solid dispersions were prepared by the fusion method with polyethylene glycol 6000(PEG 6000) as the carrier. Evaluation of the properties of the dispersions was performed using dissolution studies, X ray powder diffraction and Fourier transform infrared (FT IR) spectroscopy. Results The rate of dissolution of silymarin was considerably improved as compared with pure silymarin when formulated in solid dispersions with PEG 6000. The data of the X ray diffraction showed some changes in the parameters of lattice spacing [ d ], peak position and relative intensities. FT IR together with those from X ray diffraction showed the absence of well defined drug polymer interactions. Conclusion The dissolution improvement of poorly soluble silymarin could be illuminated by the changes of the lattice parameters of PEG 6000 and the drug.
基金Project supported by the National Natural Science Foundation of China (Nos. 40471111 and 70571076)the Ministry of Science and Technology of China (No. 2001CB5103)
文摘Objective: To estimate the prevalence rates of neural tube defects (NTDs) in Heshun County, Shanxi Province, China by Bayesian smoothing technique. Methods: A total of 80 infants in the study area who were diagnosed with NTDs were analyzed. Two mapping techniques were then used. Firstly, the GIS software ArcGIS was used to map the crude prevalence rates. Secondly, the data were smoothed by the method of empirical Bayes estimation. Results: The classical statistical approach produced an extremely dishomogeneous map, while the Bayesian map was much smoother and more interpretable. The maps produced by the Bayesian technique indicate the tendency of villages in the southeastern region to produce higher prevalence or risk values. Conclusions: The Bayesian smoothing technique addresses the issue of heterogeneity in the population at risk and it is therefore recommended for use in explorative mapping of birth defects. This approach provides procedures to identify spatial health risk levels and assists in generating hypothesis that will be investigated in further detail.
基金Project(50704036) supported by the National Natural Science Foundation of ChinaProject(08JJ3027) supported by the Natural Science Foundation of Hunan Province, China
文摘Magnesium oxysulfate （MgSO4·5Mg（OH）2·2H2O） flake powders with an average diameter of 2 ~tm and a thickness of 0.052 μm were prepared using magnesium sulfate and sodium hydroxide as raw materials by hydrothermal synthesis process. The composition, morphology and structural features of the hydrothermal products were examined with X-ray powder diffraction （XRD）, scanning electron microscopy （SEM） and Fourier transform infrared spectroscopy （FTIR）. The experimental results indicate that in the conditions of n（NaOH）/n（MgSO4） of 1.25, the dosage of w（Na3PO4） crystal additives of 1.0% w（MgSO4）, stirring for 5 h at 180 ℃, the morphology of MgSO4·5Mg（OH）2·2H2O products is flaky and laminar, which is a kind of complex magnesium singlecrystal. The recycling of MgSO4 mother liquor was also investigated to make a full use of the materials and reduce disposal. The results prove that there is no adverse effect on the yield and purity of the products.
基金supported by the National Natural Science Foundation of China(21101148,21371165,51372242,21210001,21471144)the National Natural Science Foundation for Creative Research Group(21221061)Jilin Province Youth Foundation(201201005,201201008)
文摘Nanoscale europium（Ⅲ） metal-organic frameworks, Eu（BTC）（H20）.DMF, were synthesized by rapid microwave-assisted method. The components of the as-prepared products were confirmed by the elemental analysis, X-ray powder diffraction （XRD）, thermal gravimetric analysis （TGA） and Fourier-transform infrared spectra （FTIR） analyses. Eu（BTC）（H20）.DMF with various morphologies, including particle-like, rod-like, straw-sheaf-like nanostructures, could be simply prepared by con- trolling the concentrations of the starting reactants. The optical measurements on the obtained Eu（BTC）（H20）- DMF indicated that all the nanomaterials show the characteristic emissions of the Eu3＋ ions at 578, 590, 612, 650, and 699 nm, which were at- tributed to 5Do→7FJ （J=0-4） transitions of the Eu3＋ ion, respectively. It was also noticed that the luminescent properties of the as-prepared products were heavily dependent on the morphologies and sizes of the nanomaterials. The assembled straw-sheaf-like architectures displayed the strongest emissions and the longest luminescence lifetime, which was mainly due to the fewest surface defects.
