The local defect in rotating machine always gives rise to repetitive transients in the collected vibration signal. However, the transient signature is prone to be contaminated by strong background noises, thus it is a...The local defect in rotating machine always gives rise to repetitive transients in the collected vibration signal. However, the transient signature is prone to be contaminated by strong background noises, thus it is a challenging task to detect the weak transients for machine fault diagnosis. In this paper, a novel adaptive tunable Q-factor wavelet transform(TQWT) filter based feature extraction method is proposed to detect repetitive transients. The emerging TQWT possesses distinct advantages over the classical constant-Q wavelet transforms, whose Q-factor can be tuned to match the oscillatory behavior of different signals, but the parameter selection for TQWT heavily relies on prior knowledge. Within our adaptive TQWT filter algorithm, the automatic optimization techniques for three TQWT parameters are implemented to achieve an optimal TQWT basis that matches the transient components. Specifically, the decomposition level is selected according to a center frequency ratio based stopping criterion, and the Q-factor and redundancy are optimized based on the minimum energy-weighted normalized wavelet entropy.Then, the adaptive TQWT decomposition can be achieved in a sparse way and result in subband signals at various wavelet scales.Further, the optimum subband signal which carries transient feature information, is identified using a normalized energy to bandwidth ratio index. Finally, the single branch reconstruction signal from the optimum subband is obtained with transient signatures via inverse TQWT, and the frequency of repetitive transients is detected using Hilbert envelope demodulation. It has been verified via numerical simulation that the proposed adaptive TQWT filter based feature extraction method can adaptively select TQWT parameters and the optimum subband for repetitive transient detection without prior knowledge. The proposed method is also applied to faulty bearing vibration signals and its effectiveness is validated.展开更多
Semiarid loess hilly areas in China are enduring a series of environmental conflicts between urban expansion,cultivated land conservation,soil erosion and water shortage,and require land use allocation to reconcile th...Semiarid loess hilly areas in China are enduring a series of environmental conflicts between urban expansion,cultivated land conservation,soil erosion and water shortage,and require land use allocation to reconcile these environmental conflicts.We argue that the optimized spatial allocation of rural land use can be achieved by a Particle Swarm Optimization (PSO) model in conjunction with multi-objective optimization techniques.Our study focuses on Yuzhong County of Gangsu Province in China,a typical catchment on the Loess Plateau,and proposes a land use spatial optimization model.The model maximizes land use suitability and spatial compactness based on a variety of constraints,e.g.optimal land use structure and restrictive areas,and employs an improved PSO algorithm equipped with a determinant initialization method and a dynamic weighted aggregation (DWA) method to obtain the optimized land use spatial pattern.The results suggest that (1) approximately 4% of land use should be reallocated and these changes would alleviate the environmental conflicts in the study area;(2) the major reshuffling is slope farmland and newly added construction and cultivated land,whereas the unchanged areas are largely forests and basic farmland;and (3) the PSO is capable of optimizing rural land use allocation,and the determinant initialization method and DWA can improve the performance of the PSO.展开更多
基金supported by the National Natural Science Foundation of China (Grant Nos. 51335006 & 51605244)
文摘The local defect in rotating machine always gives rise to repetitive transients in the collected vibration signal. However, the transient signature is prone to be contaminated by strong background noises, thus it is a challenging task to detect the weak transients for machine fault diagnosis. In this paper, a novel adaptive tunable Q-factor wavelet transform(TQWT) filter based feature extraction method is proposed to detect repetitive transients. The emerging TQWT possesses distinct advantages over the classical constant-Q wavelet transforms, whose Q-factor can be tuned to match the oscillatory behavior of different signals, but the parameter selection for TQWT heavily relies on prior knowledge. Within our adaptive TQWT filter algorithm, the automatic optimization techniques for three TQWT parameters are implemented to achieve an optimal TQWT basis that matches the transient components. Specifically, the decomposition level is selected according to a center frequency ratio based stopping criterion, and the Q-factor and redundancy are optimized based on the minimum energy-weighted normalized wavelet entropy.Then, the adaptive TQWT decomposition can be achieved in a sparse way and result in subband signals at various wavelet scales.Further, the optimum subband signal which carries transient feature information, is identified using a normalized energy to bandwidth ratio index. Finally, the single branch reconstruction signal from the optimum subband is obtained with transient signatures via inverse TQWT, and the frequency of repetitive transients is detected using Hilbert envelope demodulation. It has been verified via numerical simulation that the proposed adaptive TQWT filter based feature extraction method can adaptively select TQWT parameters and the optimum subband for repetitive transient detection without prior knowledge. The proposed method is also applied to faulty bearing vibration signals and its effectiveness is validated.
基金supported in part by the National High-Tech Research & Development Program of China (Grant No.2011AA120304)National Key Technology R&D Program of China(Grant Nos. 2011BAB01B06 and 2006BAB05B06)
文摘Semiarid loess hilly areas in China are enduring a series of environmental conflicts between urban expansion,cultivated land conservation,soil erosion and water shortage,and require land use allocation to reconcile these environmental conflicts.We argue that the optimized spatial allocation of rural land use can be achieved by a Particle Swarm Optimization (PSO) model in conjunction with multi-objective optimization techniques.Our study focuses on Yuzhong County of Gangsu Province in China,a typical catchment on the Loess Plateau,and proposes a land use spatial optimization model.The model maximizes land use suitability and spatial compactness based on a variety of constraints,e.g.optimal land use structure and restrictive areas,and employs an improved PSO algorithm equipped with a determinant initialization method and a dynamic weighted aggregation (DWA) method to obtain the optimized land use spatial pattern.The results suggest that (1) approximately 4% of land use should be reallocated and these changes would alleviate the environmental conflicts in the study area;(2) the major reshuffling is slope farmland and newly added construction and cultivated land,whereas the unchanged areas are largely forests and basic farmland;and (3) the PSO is capable of optimizing rural land use allocation,and the determinant initialization method and DWA can improve the performance of the PSO.
