紧铆在军舰上的“螺丝钉”──记机电长冯守东

紧铆在军舰上的“螺丝钉”──记机电长冯守东翟永远，余成龙舰艇部队有句顺口溜，“一航海，二舱面，谁也不愿干机电”。冯守东是郑和舰上的机电长，他“干机电，爱机电”，如同一颗不滑扣的螺丝钉，紧铆在机器上整整十个年头。他带领战友们用辛勤的汗水，从中国海跨越太...

一种机电式钢管长度测量方法

概述了国内钢管测长设备的现状,着重介绍了一种机电式钢管测长装置及其测量方法,对其测量控制系统和它的测控逻辑等关键技术要素进行了较为完整和深入的描述。

机电式长寿命电能表在我国的应用展望

电力是国民经济的重要能源,把市场营销的观念引入电力企业中,充分发挥"电力先行"的职能,这是社会的需求和市场竞争的需要;针对当前电力市场的供求变化,结合未来的发展,在电力企业中实施积极有效的营销策略对电力体制改革有重要的促进意义。

英雄群体灿烂的今天

8年前,海军工程大学13名毕业学员乘火车赴南海舰队报到,途经衡阳时列车脱轨颠覆。危难时刻,学员们自发组织起来投入现场抢险,抢救遇险伤员近百名、转移乘客200多名。年仅21岁的学员刘晓松在抢救乘客中壮烈牺牲。胡锦涛在反映学员们英雄事迹的材料上两次做出批示,号召广大青少年向被誉为"衡阳抢险英雄群体"的13名军校大学生学习。8年过去了,他们的工作生活情况怎样?成长进步情况又如何?请看——

Formation mechanism and organizational controlling of ultra-fine-grain copper processed by asymmetrical accumulative rolling-bond and annealing

The initial copper with large grain sizes of 60-100 μm was processed by six passes asymmetrical accumulative rolling-bond （AARB） and annealing, the ultra-fine-grained （UFG） copper with grain size of 200 nm was obtained, and the microstructures and properties were studied. The results show that there are large sub-structures and also texture component C for the UFG copper obtained by six passes AARB, possessing high strength and microhardness in company with poor elongation and conductivity. Thereafter, the UFG copper was annealed at 220 °C for 35 min, in which the sub-structures disappear, the grain boundaries are composed of big angle grain boundaries, and the textures are composed of a variety of texture components and parts of twins. Compared with the UFG copper obtained by six passes AARB, the tensile strength and yield strength for the UFG copper obtained by six passes AARB and annealing at 220 °C for 35 min are decreased slightly, the elongation and conductivity are improved obviously.

“随时准备为党和人民牺牲一切” 学习姜开斌忠诚担当的精神

姜开斌,是习近平主席2019年新年贺词中特别提到的'闪亮的名字'——'他们是新时代最可爱的人,永远值得我们怀念和学习。'2018年8月,为保护中国船舶重工集团有限公司第七六〇研究所的国家某重点试验平台,姜开斌被巨浪卷入海中,英勇牺牲。

Simulation and calculation of internal faults in long-stator linear synchronous motor based on winding function theory

To guarantee the safety of the high speed maglev train system, a novel model based on the winding function theory is proposed for the long-stator linear synchronous motor（LSM）, which is suitable for the real-time calculation of the running state. The accurate coupled mathematical models under different internal fault conditions of the LSM are derived based on the normal model. Then the fault currents and electromagnetic forces are simulated and calculated for the major potential internal faults of the LSM, such as the single-phase short circuit, the phase-phase short circuit and the single-phase open circuit. The characteristic curve between the electromagnetic force and the armature current of the LSM, which is compared with the results from the finite element method, proves the validation of the proposed method. The fault rule is determined and the proposed analytical model also shows its feasibility in the fast fault diagnosis through the comparison of the simulation results of currents and electromagnetic forces under different internal fault types and short circuit ratios.

Formation mechanisms of Ni-Al intermetallics during heat treatment of Ni coating on 6061 Al substrate

The formation mechanisms and growth kinetics of Al3 Ni and Al3Ni2 in Ni-Al diffusion couple prepared by electrodeposition of Ni on Al substrate were investigated. The nickel coating with 20 μm thickness was applied on 6061 aluminum alloy by direct current electroplating. The samples were then heat-treated for different durations at 450, 500 and 550 °C under argon atmosphere. The intermetallic phases were identified by means of scanning electron microscopy（SEM）, energy dispersive spectrometry（EDS） and X-ray diffraction（XRD）. The results showed that the formation of intermetallic phases consisted of two important steps. The first step was the lateral growth of intermetallic phase from separate sites, resulting in the formation of a continuous layer. The second step was the growth of the continuous intermetallic layer in the direction perpendicular to the interface. However, excessive increase in thickness of intermetallic phases led to the detachment of reaction products, i.e., Al3 Ni and Al3Ni2, from the substrate. It was also observed that aluminum was the dominant diffusing element during Al3 Ni growth, while nickel diffusion was dominant during Al3Ni2 growth. The growth kinetics of both Al3 Ni and Al3Ni2 phases obeyed a parabolic law.

Preparation and performance of 3D-Pb anodes for nonferrous metals electrowinning in H2SO4 aqueous solution

The effects of Pb^2+concentration,current density,deposition time and temperature on Pb deposit structure were investigated.In lower Pb^2+concentration(~0.15 mol/L),carambola-like 3D-Pb structure was constructed,while in higher Pb2+concentration(≥0.30 mol/L),Pb deposits exhibited pyramid-like structure.Furthermore,the oxide layer and anodic potential of carambola-shaped 3D-Pb(Cara-Pb)and pyramid-shaped 3D-Pb(Pyra-Pb)anodes were investigated and compared with those of fresh Pb anode.After 72 h galvanostatic electrolysis(50 mA/cm2)in 160 g/L H2SO4 solution,the oxide layer on Pyra-Pb was much thicker than that on Cara-Pb and Pb anodes,which remarkably relieved intercrystalline corrosion of the metallic substrate.Additionally,the oxide layer on Pyra-Pb anode presented a larger surface area and higher PbO2 content.Hence,Pyra-Pb anode showed a 40 m V lower anodic potential compared to Cara-Pb and Pb anodes.In sum,Pyra-Pb anode had a potential to decrease energy consumption and prolong the life span of traditional Pb anode.

The Slot Number and Air-Gap Effect on Performance of the High-Speed Brushless Permanent Magnet Motor

This paper describes the key issues of high-speed brushless permanent magnet motor design, such as rotor design, stator design, and determination of the main dimensions, and the overall design process was given. In this paper, a two-pole three-phase high-speed brushless PM （permanent magnet） motor with ratings air-gap length and stator slot number on the motor performance of 7.5 kW, 30,000 rpm is designed, and the effect of the different was analyzed. The results show that larger number of stator slot decreases the rotor loss and the rotor torque ripple. Larger air-gap length decreases the rotor loss.

Television as Popular Culture Media and Parental Attention and Their Correlation to the Students＇ Motivation to Choose Major

Television as one of the popular culture media plays an important role in the development of students＇ personality and knowledge because it provides countless information and entertainment that can enhance their knowledge as the viewers. This study was conducted to give an idea whether television viewing and parental attention can assist students to take a decision of choosing major at the senior high school. This study used descriptive method which analyzed the correlation among television viewing, parental attention, and the students＇ motivation to choose a major. The sample of this study consisted of 100 students of the state senior high school in Malang, East Java. The finding shows that there is no correlation among television viewing, parental attention, and the students＇ motivation to choose major at the senior high school. In other words, the possibility of choosing the major can be attributed to some other factors such as interest, talent, aspiration, and other expectation to achieve their goals

Energy conservation research of dehumidification system for main cable anticorrosion of suspension bridge

The necessity of the main cable anticorrosion for suspension bridge is described, and operating principles and composition of main cable dehumidification system are analyzed. An idea using the waste heat of high temperature outlet air of dehumidification system to heat up regeneration air of rotary-type dehumidifier is put forward in this paper. The concrete scheme is to install a heat exchanger on air-out pipeline of roots blower and air-in pipeline of regeneration electric heater of rotary dehumidifier. Air preheated by the heat exchanger enters regeneration electric heater of rotary-type dehumidifier. Energy conservation of main cable dehumidification system for the Yangtze River highway bridge is calculated, and the results show that energy conservation rate can reach 44 %.

ZnO whiskers growth on the surface of Sn9Zn/Cu solder joints in concentrator silicon solar cells solder layer

ZnO whiskers observation on the surface of SnZn/Cu solder joints in concentrator silicon solar cells solder layer is reported. In the experiment,SnZn/Cu samples are left in laboratory after reflow soldering for two years before an examination by SEM,then ZnO whiskers can be observed obviously,which grows out from the rich-Zn phase of the samples and causes electrical short circuit in the electronics appliances,which demonstrates that the SnZn solder shows a risk for the short circuiting failure of an electronic device. Moreover,the growth mechanism of ZnO whiskers is researched based on cracked oxide theory,which provides the reference support for SnZn solders application.

Ion-Conductive-Polymer-Film Actuators with Pt Electrodes Selectively Grown using Non-Electrolyzed Plating

Organic soft actuators are of special interest in many fields including intravascular neurosurgery. Ion conductive polymer film （ICPF） actuators have been one of the strong candidates. The ICPF investigated here was a cation-exchange membrane （Nation 117, Du Pont）. When a voltage is given between the metal eIectrodes of an ICPF actuator, the ICPF actuator bends in the water due to the motion of Li＋ cations with associated water. In order to increase the freedom of the deformation of the ICPF actuator, structures of independent electrode pairs were proposed. The electrodes were selectively deposited by non-electrokvzed plating including the Pt [（NH3）6]^4＋ deposition process in a [Pt（NH3）6]Cl4 solution and the reduction process in a NaBH4 solution. Here, an elastomer adhesive tape with a fine electrode patterns was used performances were reported in detail. as a mask. The actuators processing conditions and their actuator