期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
基于LiAl-LDH/C杂化前体制备高比表面固体碱催化剂及其催化性能研究 被引量:3
1
作者 宋奕慧 雷志轶 +3 位作者 范国利 杨兰 林彦军 李峰 《化工学报》 EI CAS CSCD 北大核心 2021年第6期3084-3094,F0002,共12页
采用成核-晶化隔离法制备LiAl-CO_(3)-LDHs晶核,在LDHs晶核晶化的过程中引入葡萄糖分子作为碳源,构筑组成和结构可调的LDHs/C型杂化复合前体。通过高温处理,实现前体的结构拓扑转变及无定形碳组分的去除,得到高比表面积的LiAl复合金属... 采用成核-晶化隔离法制备LiAl-CO_(3)-LDHs晶核,在LDHs晶核晶化的过程中引入葡萄糖分子作为碳源,构筑组成和结构可调的LDHs/C型杂化复合前体。通过高温处理,实现前体的结构拓扑转变及无定形碳组分的去除,得到高比表面积的LiAl复合金属氧化物型固体碱催化剂。采用XRD、FT-IR、BET、TEM、SEM、CO_(2)-TPD等表征手段对催化剂的组成、结构、织构性能、表面碱性进行了详细研究,并以苯甲醛和氰基乙酸乙酯间的Knoevenagel缩合反应为探针反应系统地研究了催化剂的碱催化性能。研究结果表明,LDHs/C杂化前体制备过程中葡萄糖与金属离子的摩尔比、水热晶化温度以及焙烧温度是影响催化剂活性的主要因素,晶化温度和焙烧温度的提升不利于碱性位的充分暴露。在150℃的水热晶化温度下,葡萄糖与Al 3+的摩尔比为3时的杂化复合前体经500℃焙烧得到的LiAl-MMO-150-3-500固体催化剂比表面积高达229 m 2·g^(-1),苯酚吸附测得催化剂的总碱量为855μmol·g^(-1),对苯甲醛的转化率高达88.21%。 展开更多
关键词 层状双金属氢氧 杂化前体 高比表面积 碱催 KNOEVENAGEL缩合反应
下载PDF
Effect of Cobalt Precursor on Microstructures and Visible Light Photoactivity of Doped TiO2 Powders 被引量:8
2
作者 Jing-ying Shi Wen-hua Leng +2 位作者 Jiang-lin Cao Jian-qing Zhang Chu-nan Cao 《Chinese Journal of Chemical Physics》 SCIE CAS CSCD 北大核心 2006年第5期463-468,共6页
In order to develop photoactive cobalt-doped TiO2 for the degradation of organic pollutants using visible light irradiation, the effects of cobalt precursor on TiO2 microstructure were investigated. Three cobaltprecur... In order to develop photoactive cobalt-doped TiO2 for the degradation of organic pollutants using visible light irradiation, the effects of cobalt precursor on TiO2 microstructure were investigated. Three cobaltprecursors, i.e. COCl2, Co(NO3)2 and COSO4 with two doping levels (nominally 1% and 10%), and two annealing temperatures (400 and 800 ℃) were adopted to prepare tile doped titania through the sol-gel method. The powder samples were characterized with XRD, SEM, BET surface area analysis and UV-Vis absorption spectroscopy, and their photocatalytic activities were evaluated by the degradation of aniline under visible light irradiation. The results showed that the distribution of titania phases, particle size, morphology, surface area and the optical absorption of the catalysts were greatly dependent on the cobalt precursors. Samples prepared from Co(NO3)2, especially for those doped at 1% and calcined at 400 ℃, showed the highest photocatalytic activity towards the degradation of aniline, and the possible reasons are discussed briefly. 展开更多
关键词 Cobalt precursor Doped titania PHOTOCATALYSIS Visible light
下载PDF
Binaphthyl-bridged bis-imidazolinium salts as N-heterocyclic carbene ligand precursors in the palladium-catalyzed Heck reaction
3
作者 WU Hui, JIN Can, HUANG GuoLi, WANG LianJun, JIANG JuLi & WANG LeYong Key Laboratory of Mesoscopic Chemistry of Ministry of Education School of Chemistry and Chemical Engineering, Nanjing University, Nanjing 210093, China 《Science China Chemistry》 SCIE EI CAS 2011年第6期951-956,共6页
Two new bis-imidazolinium salts (4a, 4b) have been synthesized as precursors of N-heterocyclic carbenes (NHCs) from the commercially available (R)-2,2′-dihydroxy-1,1′-binaphthalene. The two bis-imidazolinium salts w... Two new bis-imidazolinium salts (4a, 4b) have been synthesized as precursors of N-heterocyclic carbenes (NHCs) from the commercially available (R)-2,2′-dihydroxy-1,1′-binaphthalene. The two bis-imidazolinium salts were used as efficient precursor of NHC ancillary ligands in the palladium-catalyzed Heck reaction. Good to excellent yields and high stereoselectivities were obtained with ethyl acrylate, acrylonitrile, and acrylamide as starting materials. The structure of bis-imidazolinium salt 4b was further characterized by single crystal X-ray diffraction analysis. 展开更多
关键词 N-heterocyclic carbenes Heck reaction PALLADIUM imidazolinium salts
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部