HL-1M托卡马克LHCD加热离子温度测量和杂质辐射特性

叙述了在ＨＬ－１Ｍ托卡马克ＬＨＣＤ实验中观测到的杂质ＶＵＶ辐射特性。用谱线的都卜勒展宽测量了离子温度。在一定的电子密度下，ＬＨＣＤ改善了等离子体的约束性能，对离子有显著的加热效果。

高浓锥形除渣器中废纸浆特性与浆杂分离阻力间的影响关系

占比日益增加的废纸制浆必须配备高浓锥形除渣器,杂质与浆料纤维间的分离阻力是影响其高效净化的重要因素。针对研发出的新型导流式高浓锥形除渣器,首先,研究了旧箱纸板(OCC)浆、旧报纸(ONP)浆、竹浆和玉米秸秆浆的纤维性能以及废纸浆中主要重杂质(如玻璃和金属类杂质)的基本特性;其次,分析了浆料和杂质特性对浆杂分离的影响;最后,建立相关数学模型,分析了流体阻力和阻力系数。结果表明,相对黏度大、打浆度低、浆浓高的浆料分离阻力较大;ONP浆中的浆杂比OCC浆中的更易分离;相同分离条件下,杂质颗粒直径越大,其流体阻力也越大,在分离过程中密度大的杂质所受浆杂分离动力和阻力同步增大;流体阻力Fz和阻力系数CD数学模型分别为Fz=CDAρfu22和CD=4πdg3u2(ρ/ρf-1)。

Characteristics of Fruit Quality of Peach Cultivars and Hybrids in the Steppe Crimea

The study of peach fruit quality and biochemical composition of cultivars and hybrids were conducted in terms of the steppe zone of Crimea. A total of 40 cultivars and hybrids from five periods of ripening were analyzed for content of basic biochemical components： solids, sugars, acids, polyphenolic compounds and vitamin C. The main fruit quality parameters： the size, the attractive appearance, the consistency flesh, the stone adherence to flesh, taste and others have been evaluated. As a result of studies peach cultivars with a high content of sugar in the fruit under the steppe Crimea have highlighted： Kremlyovskiy （13.6）, Regina （13.2）, Velvet （12.9）, hybrids C7/38 （13.1） and C4/57 （12.9）. Cultivars and hybrids of peach 10607, C1/227 C7/38, C7/6, C8/162, C4/147, C16/87, C4/64, Early Red Haven, Miorita, 7/221, Kremlyovskiy, 10848 are characterized by the best biochemical and morphological indices of fruits. They are recommended for State cultivar testing or use in breeding work to improve the quality of peach fruits.

Influence of the Surface and Structural Characteristics of Activated Carbons on Adsorptive Removal of Halo-Olefinic Impurities from 1,1,1,3,3-Pentafluoropropane

Halo-olefinic impurities in 1,1,1,3,3-pentafluoropropane （HFC-245fa） product used as blowing agents, etc. could damage the human body and must be removed. Activated carbon was treated by HCI, HN03 and NaOH, respectively. The adsorptive performance of unmodified and modified activated carbons for the removal of a low con- tent of l-chloro-3,3,3-trifluoro-l-propene （HCFC-1233zd）, 1,3,3,3-tetrafluoro-l-propene （HFC-1234ze）, 1- chloro-l,3,3,3-tetrafluoro-l-propene （HFC-1224zb） and 2-chloro-l,3,3,3-tetrafluoro-l-propene （HFC-1224xe） halo-olefins in the 1,1,1,3,3-pentafluoropropane （HFC-245fa] product was investigated. These halo-olefinic im- purities could be substantially removed from the HFC-245fa product via the adsorption over activated carbon when the adsorption temperature was under 333 K, which can be attributed to the n-n dispersion interactions between the halo-olefins and carbon graphite layer. The basic surface groups of activated carbon could catalyze the decomposition of HFC-245fa to form HFC-1234ze. However, the significant increase in the amount of surface acidic groups of activated carbon led to a distinct decrease of adsorption capacity due to the reduction in the mi- cropore volume of adsorbent and a decrease in the strength of the n-n dispersive interactions between halo- olefin molecules and carbon basal. The breakthrough time of halo-olefinic impurities on activated carbon in- creased with the increase of molecular mass and the decrease of molecular symmetry.

Thermoluminiscence Response of an Alloy Quaternary Ionic Crystal Exposed to High Energy Radiation

The alkali halide crystals exhibit significant TL （thermoluminescence） properties when exposed to ionizing radiation. The defects in crystals can be produced in high concentration by means of chemical impurities, radiation, mechanical work and others processes. This study is concerned with the TL properties of quaternary mixtures of alkali halide crystals when they are irradiated with beta and gamma-rays. The samples were made mixing KCI, KBr, RbCI, RbBr salts doped with divalent europium （Eu2＋）, by the Czochralski method sintering at 400 ~C during 6 hours in a N2 atmosphere. The samples were exposed to beta and gamma rays. We present the TL glow curves, demonstrating that the nature of the defects in the crystals can be produced by trapping states and recombination mechanisms. The highest temperature TL curves are the most interesting due to possible applications in dosimetry and optical energy storage.

Deformation characteristics and genesis of the Waziyu metamorphic core complex in western Liaoning of China

The Waziyu metamorphic core complex is situated at the eastern end of the Yanshan tectonic belt.The NNE-striking detachment ductile shear zone in the core complex lies between the Archean metamorphic basement and Fuxin-Yixian rift basin,dips NW gently,and shows corrugation folds.Exposure structures,microstructures,and quartz C-axis fabrics all indicate top-to-the WNW sense of shear,i.e.,ca.285°,for the shear zone.Estimates of the deformation temperatures(ca.550-250°C) demonstrate its mid-crustal origination and progressive deformation from deep to shallow levels.The northern segment of the shear zone shows relatively weak exhumation with exposures of low-temperature mylonites whereas its middle and southern segments have more intense uplifting with exposures of high-temperature mylonites.Biotite and muscovite 40 Ar/39 Ar ages,U-Pb dating results of zircon from dikes and plutons as well as formation ages of the supra-detachment basin all suggest the formation time of 135-100 Ma for the core complex.The formation was also associated with syntectonic emplacement of the Early Cretaceous Shishan pluton.The western margin of the core complex was truncated by the Sunjiawan-Shaohuyingzi brittle normal fault when it uplifted to shallow crust levels,and finally exhumed to near-surface levels.The core complex was developed by the rolling-hinge model under WNW-ESE extension during the Early Cretaceous peak destruction of the North China Craton.Ductile flow did not appear in the lower plate,therefore not supporting the low-crust gravitational collapse.