A new approach for peak-to-average power ratio (PAPR) reduction in orthogonal frequency division multiplexing (OFDM) systems was proposed.This approach is based on assigning powers to the different subcarriers of OFDM...A new approach for peak-to-average power ratio (PAPR) reduction in orthogonal frequency division multiplexing (OFDM) systems was proposed.This approach is based on assigning powers to the different subcarriers of OFDM using an unequal power distribution strategy.In addition,a reduced complexity selective mapping (RC-SLM) scheme was proposed.The proposed scheme is based on partitioning the frequency domain symbol sequence into several sub-blocks,and then each sub-block is multiplied by different phase sequences whose length is shorter than that used in the conventional SLM scheme.Then,a kind of low complexity conversions is used to replace the IFFT blocks.The performance of the proposed RC-SLM scheme along with the new approach was studied with computer simulation.The obtained results show that the proposed RC-SLM scheme is able to achieve the lowest computational complexity when compared with other low complexity schemes proposed in the literature while at the same time improves the PAPR reduction performance by about 0.3 dB.展开更多
A new algorithm called the weighted least square discrete parameterization (WLSDP) is presented for the parameterization of triangular meshes over a convex planar region. This algorithm is the linear combination of th...A new algorithm called the weighted least square discrete parameterization (WLSDP) is presented for the parameterization of triangular meshes over a convex planar region. This algorithm is the linear combination of the discrete Conformal mapping(DCM) and the discrete Authalic mapping(DAM). It provides the good properties of both DCM and DAM, such as robustness and low distortion. By adjusting the scaling factor q embedded in the WLSDP, satisfactory parameterizations in different special applications can be achieved.展开更多
This note deals with the existence and uniqueness of a minimiser of the following Grtzsch-type problem inf f ∈F∫∫_(Q_1)φ(K(z,f))λ(x)dxdyunder some mild conditions,where F denotes the set of all homeomorphims f wi...This note deals with the existence and uniqueness of a minimiser of the following Grtzsch-type problem inf f ∈F∫∫_(Q_1)φ(K(z,f))λ(x)dxdyunder some mild conditions,where F denotes the set of all homeomorphims f with finite linear distortion K(z,f)between two rectangles Q_1 and Q_2 taking vertices into vertices,φ is a positive,increasing and convex function,and λ is a positive weight function.A similar problem of Nitsche-type,which concerns the minimiser of some weighted functional for mappings between two annuli,is also discussed.As by-products,our discussion gives a unified approach to some known results in the literature concerning the weighted Grtzsch and Nitsche problems.展开更多
Recent studies have pointed out that the widespread iron deposits in southwestern Fujian metallogenic belt(SFMB)(China) are skarn-type deposits associated with the Yanshanian granites. There is still excellent potenti...Recent studies have pointed out that the widespread iron deposits in southwestern Fujian metallogenic belt(SFMB)(China) are skarn-type deposits associated with the Yanshanian granites. There is still excellent potential for mineral exploration because large areas in this belt are covered by forest. A new predictive model for mapping skarn-type Fe deposit prospectivity in this belt was developed and focused on in this study, using five criteria as evidence:(1) the contact zones of Yanshanian granites(GRANITE);(2) the contact zones within the late Paleozoic marine sedimentary rocks and the carbonate formations(FORMATION);(3) the NE-NNE-trending faults(FAULT);(4) the zones of skarn alterations(SKARN); and(5) the aeromagnetic anomaly(AEROMAGNETIC). The fuzzy weights of evidence(FWof E) method, developed from the classical weights of evidence(Wof E) and based on fuzzy sets and fuzzy probabilities, could provide smaller variances and more accurate posterior probabilities and could effectively minimize the uncertainty caused by omitted or wrongly assigned data and be more flexible than the Wof E. It is an efficient and widely used method for mineral potential mapping. Random forests(RF) is a new and useful method for data-driven predictive mapping of mineral prospectivity method, and needs further scrutiny. Both prospectivity results respectively using the FWof E and RF methods reveal that the prediction model for the skarn-type Fe deposits in the SFMB is successful and efficient. Both methods suggested that the GRANITE and FORMATION are the most valuable evidence maps, followed by SKARN, AEROMAGNETIC, and FAULT. This is coincident with the skarn-type Fe deposit mineral model in the SFMB. The unstable performance experienced when FORMATION was omitted might indicate that the highest uncertainty and risk in follow-up exploration is related to the sequences. In addition, the performance of the RF method for the skarn-type Fe deposits prospectivity in the SFMB is better than the FWof E; therefore, it could be used to guide further exploration of skarn-type Fe prospects in the SFMB.展开更多
文摘A new approach for peak-to-average power ratio (PAPR) reduction in orthogonal frequency division multiplexing (OFDM) systems was proposed.This approach is based on assigning powers to the different subcarriers of OFDM using an unequal power distribution strategy.In addition,a reduced complexity selective mapping (RC-SLM) scheme was proposed.The proposed scheme is based on partitioning the frequency domain symbol sequence into several sub-blocks,and then each sub-block is multiplied by different phase sequences whose length is shorter than that used in the conventional SLM scheme.Then,a kind of low complexity conversions is used to replace the IFFT blocks.The performance of the proposed RC-SLM scheme along with the new approach was studied with computer simulation.The obtained results show that the proposed RC-SLM scheme is able to achieve the lowest computational complexity when compared with other low complexity schemes proposed in the literature while at the same time improves the PAPR reduction performance by about 0.3 dB.
文摘A new algorithm called the weighted least square discrete parameterization (WLSDP) is presented for the parameterization of triangular meshes over a convex planar region. This algorithm is the linear combination of the discrete Conformal mapping(DCM) and the discrete Authalic mapping(DAM). It provides the good properties of both DCM and DAM, such as robustness and low distortion. By adjusting the scaling factor q embedded in the WLSDP, satisfactory parameterizations in different special applications can be achieved.
基金supported by National Natural Science Foundation of China(Grant Nos.11371268 and 11171080)the Specialized Research Fund for the Doctoral Program of Higher Education of China(Grant No.20123201110002)the Natural Science Foundation of Jiangsu Province(Grant No.BK20141189)
文摘This note deals with the existence and uniqueness of a minimiser of the following Grtzsch-type problem inf f ∈F∫∫_(Q_1)φ(K(z,f))λ(x)dxdyunder some mild conditions,where F denotes the set of all homeomorphims f with finite linear distortion K(z,f)between two rectangles Q_1 and Q_2 taking vertices into vertices,φ is a positive,increasing and convex function,and λ is a positive weight function.A similar problem of Nitsche-type,which concerns the minimiser of some weighted functional for mappings between two annuli,is also discussed.As by-products,our discussion gives a unified approach to some known results in the literature concerning the weighted Grtzsch and Nitsche problems.
基金the joint financial support from a research project on "Quantitative models for prediction of strategic mineral resources in China" (Grant No. 201211022) by China Geological Surveythe National Natural Science Foundation of China (Grant Nos. 41372007, 41430320 & 41522206)the Program for New Century Excellent Talents in University (Grant No. NCET-13-1016)
文摘Recent studies have pointed out that the widespread iron deposits in southwestern Fujian metallogenic belt(SFMB)(China) are skarn-type deposits associated with the Yanshanian granites. There is still excellent potential for mineral exploration because large areas in this belt are covered by forest. A new predictive model for mapping skarn-type Fe deposit prospectivity in this belt was developed and focused on in this study, using five criteria as evidence:(1) the contact zones of Yanshanian granites(GRANITE);(2) the contact zones within the late Paleozoic marine sedimentary rocks and the carbonate formations(FORMATION);(3) the NE-NNE-trending faults(FAULT);(4) the zones of skarn alterations(SKARN); and(5) the aeromagnetic anomaly(AEROMAGNETIC). The fuzzy weights of evidence(FWof E) method, developed from the classical weights of evidence(Wof E) and based on fuzzy sets and fuzzy probabilities, could provide smaller variances and more accurate posterior probabilities and could effectively minimize the uncertainty caused by omitted or wrongly assigned data and be more flexible than the Wof E. It is an efficient and widely used method for mineral potential mapping. Random forests(RF) is a new and useful method for data-driven predictive mapping of mineral prospectivity method, and needs further scrutiny. Both prospectivity results respectively using the FWof E and RF methods reveal that the prediction model for the skarn-type Fe deposits in the SFMB is successful and efficient. Both methods suggested that the GRANITE and FORMATION are the most valuable evidence maps, followed by SKARN, AEROMAGNETIC, and FAULT. This is coincident with the skarn-type Fe deposit mineral model in the SFMB. The unstable performance experienced when FORMATION was omitted might indicate that the highest uncertainty and risk in follow-up exploration is related to the sequences. In addition, the performance of the RF method for the skarn-type Fe deposits prospectivity in the SFMB is better than the FWof E; therefore, it could be used to guide further exploration of skarn-type Fe prospects in the SFMB.
