Three steam distillation devices (D-1, D-2 and D-4) or one simultaneous distillation (D-3, water-diethyl ether) as well as the process of CO2-SFE (Supercritical fluid extraction) were adopted in extraction of essentia...Three steam distillation devices (D-1, D-2 and D-4) or one simultaneous distillation (D-3, water-diethyl ether) as well as the process of CO2-SFE (Supercritical fluid extraction) were adopted in extraction of essential oils from Chinese-fir (Cunninghamia lancedata (Lamb) Hook.) and the chemical components of the extracted essential oil were analyzed by Gas chromatograph-MS analyses. The results showed that the essential oil could be almost extracted out within 2 hours and the device-3 had the highest extraction efficiency. The major chemical component of the oil was cedrol. The yield of the extracted essential oils from Chinese fir decreased gradually with the increase of the distillation time. The best condition for extraction by means of CO2-SFE is 100 kg·cm?2 in pressure and 40°C in temperature for. Keywords Chinese fir - Essential oil - Cedrol - Supercritical fluid extraction CLC number S781.4 Document code A Foundation item: This paper was support by the Key Foundation Research Project (G1999016001) of China and the Japan International Cooperation AgencyBiography: HUANG Luo-hua (1957-), male, Research associate, Research Institute of Wood Industry, Chinese Academy of forestry, Beijing 100091, P. R. ChinaResponsible editor: Song Funan展开更多
[Objective] The aim was to study on the high-valued utilization of China Fir sawdust extracted essential oil.[Method] In the field of fir essential oil extraction,the processed China fir sawdust was used to prepare lo...[Objective] The aim was to study on the high-valued utilization of China Fir sawdust extracted essential oil.[Method] In the field of fir essential oil extraction,the processed China fir sawdust was used to prepare low-valued products.The high-valued utilization of China fir sawdust extracted essential oil(CFSEEO),namely as a precursor to prepare granular activated carbons(GACs),was attempted.The materials were characterized by ultimate analysis,SEM and XRD.[Rusult] A butane working capacity(BWC)of 14.3 g/100 ml was obtained by using the GACs with apparent density of 0.25 g/ml.It was available to introduce the technology of extracting essential oil from the China fir sawdust(CFS)in the industrial production process of activated carbons with high BWC(12.0-16.5 g/100 ml)and high surface area(2 000-2 630 m2/g)using phosphoric acid based on previous studies of the authors.[Conclusion] The resulting carbon prepared with the raw materials containing lower moisture exhibited a better property on n-butane adsorption.展开更多
基金The Key Foundation Research Project (G1999016001) of China and the Japan International Cooperation Agency
文摘Three steam distillation devices (D-1, D-2 and D-4) or one simultaneous distillation (D-3, water-diethyl ether) as well as the process of CO2-SFE (Supercritical fluid extraction) were adopted in extraction of essential oils from Chinese-fir (Cunninghamia lancedata (Lamb) Hook.) and the chemical components of the extracted essential oil were analyzed by Gas chromatograph-MS analyses. The results showed that the essential oil could be almost extracted out within 2 hours and the device-3 had the highest extraction efficiency. The major chemical component of the oil was cedrol. The yield of the extracted essential oils from Chinese fir decreased gradually with the increase of the distillation time. The best condition for extraction by means of CO2-SFE is 100 kg·cm?2 in pressure and 40°C in temperature for. Keywords Chinese fir - Essential oil - Cedrol - Supercritical fluid extraction CLC number S781.4 Document code A Foundation item: This paper was support by the Key Foundation Research Project (G1999016001) of China and the Japan International Cooperation AgencyBiography: HUANG Luo-hua (1957-), male, Research associate, Research Institute of Wood Industry, Chinese Academy of forestry, Beijing 100091, P. R. ChinaResponsible editor: Song Funan
基金Supported by "11th five year" National Science and Technology Support Project Grants(2009BADB1B03)Forestry Public Welfare Industry Special(201004051)
文摘[Objective] The aim was to study on the high-valued utilization of China Fir sawdust extracted essential oil.[Method] In the field of fir essential oil extraction,the processed China fir sawdust was used to prepare low-valued products.The high-valued utilization of China fir sawdust extracted essential oil(CFSEEO),namely as a precursor to prepare granular activated carbons(GACs),was attempted.The materials were characterized by ultimate analysis,SEM and XRD.[Rusult] A butane working capacity(BWC)of 14.3 g/100 ml was obtained by using the GACs with apparent density of 0.25 g/ml.It was available to introduce the technology of extracting essential oil from the China fir sawdust(CFS)in the industrial production process of activated carbons with high BWC(12.0-16.5 g/100 ml)and high surface area(2 000-2 630 m2/g)using phosphoric acid based on previous studies of the authors.[Conclusion] The resulting carbon prepared with the raw materials containing lower moisture exhibited a better property on n-butane adsorption.
