The corrosion behaviors and electrochemical properties of Q235 A steel in the treated water containing corrosive halide anions(F-, Cl-) have been investigated with corrosion tests of static coupon and dynamic coupon t...The corrosion behaviors and electrochemical properties of Q235 A steel in the treated water containing corrosive halide anions(F-, Cl-) have been investigated with corrosion tests of static coupon and dynamic coupon testing, electrochemical measurement of open-circuit potential and linear sweep voltammetry. The results reveal that the existence of F-and Cl-ions in the simulated treated water accelerate the corrosion rate of Q235 A steel. The corrosion rate reaches maximum with F-concentration of 50 mg/L, Cl-concentration of 200 mg/L, respectively. However, Q235 A steel would passivate when an applied potential is added to the system. Meanwhile, the initiating passive potential becomes positive with F-, Cl-concentration increasing. There is a little influence of F-, Cl-concentration on the initiating passivation current density. Therefore, it is necessary to control F-, Cl-concentration in the treated water when it is recycled by the pipelines made of Q235 A steel.展开更多
In this paper the corrosion characteristics of Silicon carbide particulate-reinforced 6061 aluminum composite （ 6061 AI/SiCp composite ） and the base alloy are experimentally assessed. The corrosion tests are carrie...In this paper the corrosion characteristics of Silicon carbide particulate-reinforced 6061 aluminum composite （ 6061 AI/SiCp composite ） and the base alloy are experimentally assessed. The corrosion tests are carried out at different temperatures in the concentration range of 0.01N to 1N sulphuric acid as corrosion media using Tafel extrapolation technique and Electrochemical Impedance Spectroscopy （EIS）. The results obtained from Tafel extrapolation technique and Electrochemical Impedance Spectroscopy are in good agreement. The results show an increase in the corrosion rate with increase in temperature as well as with increase in the concentration of the corrosion media. The thermodynamic parameters like energy of activation are calculated using Arrhenius theory equation and, enthalpy of activation and entropy of activation are calculated using transition state theory equation.展开更多
基金Project(2018YFC1900304)supported by the National Key R&D Program of ChinaProject(2018SK2026)supported by the Key R&D Program of Hunan Province,ChinaProject(2017SK2420)supported by the Science and Technology of Hunan Province,China。
文摘The corrosion behaviors and electrochemical properties of Q235 A steel in the treated water containing corrosive halide anions(F-, Cl-) have been investigated with corrosion tests of static coupon and dynamic coupon testing, electrochemical measurement of open-circuit potential and linear sweep voltammetry. The results reveal that the existence of F-and Cl-ions in the simulated treated water accelerate the corrosion rate of Q235 A steel. The corrosion rate reaches maximum with F-concentration of 50 mg/L, Cl-concentration of 200 mg/L, respectively. However, Q235 A steel would passivate when an applied potential is added to the system. Meanwhile, the initiating passive potential becomes positive with F-, Cl-concentration increasing. There is a little influence of F-, Cl-concentration on the initiating passivation current density. Therefore, it is necessary to control F-, Cl-concentration in the treated water when it is recycled by the pipelines made of Q235 A steel.
文摘In this paper the corrosion characteristics of Silicon carbide particulate-reinforced 6061 aluminum composite （ 6061 AI/SiCp composite ） and the base alloy are experimentally assessed. The corrosion tests are carried out at different temperatures in the concentration range of 0.01N to 1N sulphuric acid as corrosion media using Tafel extrapolation technique and Electrochemical Impedance Spectroscopy （EIS）. The results obtained from Tafel extrapolation technique and Electrochemical Impedance Spectroscopy are in good agreement. The results show an increase in the corrosion rate with increase in temperature as well as with increase in the concentration of the corrosion media. The thermodynamic parameters like energy of activation are calculated using Arrhenius theory equation and, enthalpy of activation and entropy of activation are calculated using transition state theory equation.
