不同构型的钕铁硼试件在单轴压缩状态下断裂特性研究

为了研究试件构型对钕铁硼材料单轴压缩强度和断裂模式的影响,分别对哑铃形试件和圆柱形试件进行了准静态和动态的单轴压缩实验。实验结果表明,哑铃形试件的准静态抗压强度和动态抗压强度(应变率700 s^(-1))分别比圆柱形试件高30.6%和43.1%。通过强度对比和断裂模式分析,得出哑铃形试件的实验结果比传统圆柱形试件更加接近材料的真实抗压强度。在动态实验中,两种构型试件都能观察到明显的应变率效应。对实验回收碎片的平均尺寸进行统计分析,结果表明哑铃形试件的实验回收碎片平均尺寸与理论值的匹配度远大于圆柱形试件。

Creep mechanism and creep constitutive model of aluminum silicate short-fiber-reinforced magnesium matrix composite

By the constant stress tensile creep test method, creep tests were performed on aluminum silicate short fiber-reinforced AZ91D magnesium matrix composite with volume fraction of 30% and its matrix alloy AZ91D under different temperatures and stresses. The results indicate that the composite and the matrix have the same true stress exponent and true activation energy for creep, which are 3 and 144.63 kJ/mol, respectively. The creep of the composite is controlled by the creep of its matrix, which is mainly the controlling of viscous slip of dislocation, and the controlling of grain boundary slippage as a supplement. The creep constitutive model obtained from the experiment data can well describe the creep deformation pattern of the composite.

Response Ability to External Signal Enhanced by Biological Spatial Configuration in Coupled Hindmarsh-Rose Neural System

The effect of realistic topology configuration of intercellular connections on the response ability in coupled cell system is numerically investigated by using the Hindmarsh-Rose model. For the proper coupling intensity, we set the control parameter to be near the critical value, and the external stimulus is introduced to the first cell in coupled system. It is found that, on one hand, when the cells are coupled with some proper topological structures, the external stimulus could transmit through the system, and shows better response ability and higher sensitivity. On the other hand, the influence of topological configuration on the synchronous ability and selection effect of neural system are also discussed. Our results display that the topology of coupled system may play an important role in the process of signal propagation, which could help us to understand the coordinated performance of cells in tissue.

Elasto-plastic constitutive model of aluminum alloy foam subjected to impact loading

A multi-parameter nonlinear elasto-plastic constitutive model which can fully capture the three typical features of stress-strain response, linearity, plasticity-like stress plateau and densification phases was developed. The functional expression of each parameter was determined using uniaxial compression tests for aluminum alloy foams. The parameters of the model can be systematically varied to describe the effect of relative density which may be responsible for the changes in yield stress and hardening-like or softening-like behavior at various strain rates. A comparison between model predictions and experimental results of the aluminum alloy foams was provided to validate the model. It was proved to be useful in the selection of the optimal-density and energy absorption foam for a specific application at impact events.

Constitutive model for thin sheet metal with one or several grains across thickness in micro-forming

Effects of four factors on thin sheet metal flow stress were considered, including grain size d, thickness t, grain number across thickness （t/d ratio） and surface property. Surface model was adopted to quantitatively describe the effect of t/d ratio on flow stress for pure copper. It is predicted that when t/d ratio is larger than a critical value, effect of t/d ratio on flow stress can be neglected. Existence of critical t/d ratio changes the Hall-Petch relationship and evolution of flow stress with thickness. A criterion was proposed to determine critical t/d ratio. Then a comprehensive constitutive model was developed to consider all the four factors, with parameters determined by fitting experimental data of high purity Ni. The predicted results show the same tendencies with experiment results. Particularly when t/d ratio decreases, Hall-Petch relationship and evolution of true stress show varied slopes with two transition points.

Gas Phase Conformations of Tetrapeptide Glycine-Phenylalanine- Glycine-Glycine

Systematic search of the potential energy surface of tetrapeptide glycine-phenylalanine- glycine-glycine （GFGG） in gas phase is conducted by a combination of PM3, HF and BHandHLYP methods. The conformational search method is described in detail. The relative electronic energies, zero point vibrational energies, dipole moments, rotational constants, vertical ionization energies and the temperature dependent conformational distributions for a number of important conformers are obtained. The structural characteristics of these conformers are analyzed and it is found that the entropic effect is a dominating factor in determining the relative stabilities of the conformers. The measurements of dipole moments and some characteristic IR mode are shown to be effective approaches to verify the theoreti- cal prediction. The structures of the low energy GFGG conformers are also analyzed in their connection with the secondary structures of proteins. Similarity between the local structures of low energy GFGG conformers and the α-helix is discussed and many β- and γ-turn local structures in GFGG conformers are found.

Hydrodeoxygenation of Phenolic Model Compounds over MoS2 Catalysts with Different Structures

Several MoS2 catalysts of different structure, prepared by in situ decomposition of ammonium heptamolybdate （AHM） and molybdenum naphthenate （MoNaph）, and by MoS2 exfoliation （TDM）, were characterized by BET, X-ray diffraction （XRD）, Energy Dispersive X-ray （EDX） and transmission electron microscopy （TEM）. The analysis showed that MoS2 structure was dependant upon the preparation procedure. The activity of the catalysts was determined by measuring the hydrodeoxygenation （HDO） of phenol, 4-methylphenol and 4-methoxyphenol using a batch autoclave reactor operated at 2.8 MPa of hydrogen and temperatures ranging from 320-370℃. By comparing the conversion, the reactivity order of the catalysts was： AHM〉TDM-D〉MoNaph〉thermal〉MoS2 powder〉 TDM-W. Also, the effect of reaction temperature on the HDO conversion was explained in terms of equilibrium of reversible reaction kinetics. The main products of the HDO for phenolic compounds were identified by gas chromatography/mass spectrometry （GC/MS）. The results showed that the product distribution and the HDO selectivity were correlated with the reaction temperature. Two parallel reaction routes, direct hydrogenolysis and combined hydrogenation-hydrogenolysis, were confirmed by the analysis of the product distribution. High temperature favored hydrogenolysis over hydrogenation for HDO of phenol and 4-methoxyphenol, whereas for 4-methylphenol the reverse was true.

Investigation of acoustic scale effects and boundary effects for the similitude model of underwater complex shell-structure

In this paper, the acoustic scale effects and boundary effects for the similitude model of underwater complex shell-structure are investigated. The similitude conditions and relations between the similitude model and its prototype were studied in the references. This paper investigates the acoustic scale effects for the similitude model, which are influenced by loss factor, shear and rotatory inertia. At the same time, the boundary effects which are influenced by surface sound reflection are investigated in the experiment of similitude model. The results show that the acoustic scale effects may be controlled with model designing, the boundary effects can be controlled with experimental designing between the similitude model and its prototype.

Compression behavior and constitutive model establishment of fly ash cenosphere/polyurethane aluminum alloy syntactic foam

The aluminum matrix syntactic foam was fabricated by pressure infiltration technique,and the filling material is syntactic foam material with fly ash cenosphere as the main component and polyurethane foam as the binder.Split Hopkinson pressure bar(SHPB)dynamic compression and quasi-static tests were carried out to examine the compressive response of syntactic foam in this study.Then the dynamic constitutive model was established.Results show that the compressive stress-strain curve of syntactic aluminum foam is similar to that of other metallic foam materials:both kinds of aluminum matrix syntactic foams have strain rate effect,and the syntactic foam has higher compressive strength and energy absorption than the same density aluminum foams.However,due to the different sizes of cenospheres,the dynamic compression results of two kinds of syntactic foams are different,and the energy absorption effect of syntactic foam with small size under dynamic impact is the best.In the range of strain rate and density studied experimentally,the curves of constitutive model fit well with the curves of experimental data.

The Crucial Role of Time in M＆A Activities： An Inductive Exploration

Mergers ＆ acquisitions （M＆As） are important strategic instruments, yet nearly half of all transactions fail, often resulting in disastrous write-offs and losses for corporations and financing institutions alike - despite promising prospects upfront. Applied research has been trying to find a ＂panacea＂ to prevent or at least predict M＆A failure, investigating motives, synergies and performance. Despite the growing unease with the stationary explanatory models in literature, research has only marginally focused on the concept of time, with inquiries into market timing and integration speed. Yet other timing concepts have been neglected in concepts so far despite early empirical evidence for their existence. The purpose of this paper is thus to identify and elaborate on the importance of further relevant theories of timing. For this, and true to the exploratory nature of the topic, the authors have chosen a qualitative comparative case study design based on existing case reports which are investigated for narrations highlighting timing concepts. This study reveals six factors which have a crucial impact on the M＆A outcome： time of acquisition, M＆A duration in its entirety, M＆A sequence, synergy chronology, frequency of acquisitions and time to step back. It contributes to theory and practice in outlining the careful attention that needs to be paid in planning in these factors to enhance the chances of a successful M＆A transaction.

铯原子6S_(1/2)-6P_(1/2)-8S_(1/2)阶梯型系统中的电磁感应透明信噪比的提高

为了获得高信噪比的电磁感应透明(EIT)谱线,对铯原子6S1/2-6P1/2-8S1/2阶梯型能级系统的EIT谱进行了研究。探测光的频率锁定于基态到中间态的超精细跃迁线上,控制光在中间态到激发态超精细跃迁线之间扫描,得到的EIT谱具有平坦的背景,提高了光谱的信噪比。阶梯型能级系统中光谱信号强度不仅与控制光束和探测光束的传播方向有关,而且与控制光功率有关。最终,获得了高信噪比的EIT谱线。