The inherent mechanism of size effect in micro-sheet material behavior of plastic forming was explained by the surface layer model and theory of metal crystal plasticity. A size-dependant constitutive model based on t...The inherent mechanism of size effect in micro-sheet material behavior of plastic forming was explained by the surface layer model and theory of metal crystal plasticity. A size-dependant constitutive model based on the surface layer model was established by introducing the scale parameters and modifying the classical Hall-Petch equation. The influence of the geometric dimensions and the grain size on the flow behavior of the material was discussed using the new material constitutive model. The results show that, the flow stress decreases while the sheet metal thickness decreases when the grain size keeps constant, and the micro-sheet metal with a larger grain size is more easily to be influenced by the size effects. The material constitutive model established is validated by the stress-strain curve of the micro-sheet metal with different thicknesses derived from the tensile experiments. The rationality of the material model is verified by the fact that the calculation results are consistent with the experimental results.展开更多
Effects of initial δ phase（Ni_3Nb） on the hot tensile deformation behaviors and material constants of a Ni-based superalloy were investigated over wide ranges of strain rate and deformation temperature. It is found...Effects of initial δ phase（Ni_3Nb） on the hot tensile deformation behaviors and material constants of a Ni-based superalloy were investigated over wide ranges of strain rate and deformation temperature. It is found that the true stress-true strain curves exhibit peak stress at a small strain, and the peak stress increases with the increase of initial δ phase. After the peak stress, initial δ phase promotes the dynamic softening behaviors, resulting in the decreased flow stress. An improved Arrhenius constitutive model is proposed to consider the synthetical effects of initial δ phase, deformation temperature, strain rate, and strain on hot deformation behaviors. In the improved model, material constants are expressed as the functions of the content of initial δ phase and strain. A good agreement between the predicted and measured results indicates that the improved Arrhenius constitutive model can well describe hot deformation behaviors of the studied Ni-based superalloy.展开更多
The influences of deformation conditions on grain structure and properties of 7085 aluminum alloy were investigated by optical microscopy and transmission electron microscopy in combination with tensile and fracture t...The influences of deformation conditions on grain structure and properties of 7085 aluminum alloy were investigated by optical microscopy and transmission electron microscopy in combination with tensile and fracture toughness tests. The results show that the volume fraction of dynamic recrystallization increased with the decrease of Zener-Hollomon （Z） parameter, and the volume fraction of static recrystallization increased with the increasing of Z parameter. The strength and fracture toughness of the alloy after solution and aging treatment first increased and then decreased with the increase of Z parameter. The microstructure map was established on the basis of microstructure evolution during deformation and solution heat treatment. The optimization deformation conditions were acquired under Z parameters of 1.2×10^10-9.1×10^12.展开更多
An 8 mm-high NiCoCrAlYTa coating was epitaxially built-up on a directionally solidified (DS) Ni-based superalloy blade tip by electro-spark deposition.Epitaxial morphologies of the coating and its microstructural char...An 8 mm-high NiCoCrAlYTa coating was epitaxially built-up on a directionally solidified (DS) Ni-based superalloy blade tip by electro-spark deposition.Epitaxial morphologies of the coating and its microstructural characteristics were investigated by means of SEM,XRD and TEM etc.It is observed that the fine column-like dendrites originated from the γ'-particles or γ'-clusters of the DS substrate and are un-continuously coarsened.The β-phase particles precipitate and grow eutectically with the γ-phase.The orientation of fine column dendrites depends on electro-spark deposition processing parameters and the microstructure can be characterized with superfine γ and β phases.展开更多
Based on the analysis of several objective functions,a new method was proposed.Firstly,the feature of the inclination curve was analyzed.On this basis,the soil could be divided into several blocks with different displ...Based on the analysis of several objective functions,a new method was proposed.Firstly,the feature of the inclination curve was analyzed.On this basis,the soil could be divided into several blocks with different displacements and deformations.Then,the method of the soil division was presented,and the characteristic of single soil block was studied.The displacement of the block had two components:sliding and deformation.Moreover,a new objective function was constructed according to the deformation of the soil block.Finally,the sensitivities of the objective functions by traditional method and the new method were calculated,respectively.The result shows that the new objective function is more sensitive to mechanical parameters and the inversion result is close to that obtained by the large direct shear apparatus.So,this method can be used in slope back analysis and its effectiveness is proved.展开更多
To improve the comfortability and safety of aircraft,the demand of rectangular submerged inlets(RSIs)with low resistance is proposed to increase the inlet flow rate of ram air. A theoretical model is built to numerica...To improve the comfortability and safety of aircraft,the demand of rectangular submerged inlets(RSIs)with low resistance is proposed to increase the inlet flow rate of ram air. A theoretical model is built to numerically analyze the effects of geometric parameters on the inlet mass flow rate of RSIs. The geometric parameters in question here encompass the aspect ratio of 2—4,the ramp angle of 6°—7°,the characteristic parameter of the throat of 0.20 —0.30,the ramp length of 939—1 337 mm,and the cone angle of 0° —3°. Simulation results demonstrate that the mass flow rate(MFR)is positively correlated with the aspect ratio,ramp angle,ramp length,and cone angle,and negatively correlated with characteristic parameter of the throat. Within the range of the geometric parameters considered,the RSI with the aspect ratio of 3,the ramp angle of 6°,the characteristic parameter of the throat of 0.20,the ramp length of 1 337 mm,and the cone angle of 3° obtains the largest MFR value of about 2.251 kg/s.展开更多
Currently, the integrated biomechanical studies on fish locomotion come into focus, so it is urgent to provide reliable and sys- tematic experimental results, and to establish a biomechanical ＂digital fish＂ database...Currently, the integrated biomechanical studies on fish locomotion come into focus, so it is urgent to provide reliable and sys- tematic experimental results, and to establish a biomechanical ＂digital fish＂ database for some typical fish species. Accord- ingly, based on the control framework of ＂Neural Control - Active Contraction of Muscle - Passive Deformation＂, the elec- tromyography （EMG） signals, the mechanical properties and the constitutive relationship of skin, muscle, and body trunk, as well as morphological parameters of crucian carp, are investigated with experiments, from which a simplified database of bio- mechanical ＂digital fish＂ is established. First, the EMG signals from three lateral superficial red muscles of crucian carp, which was evolving in the C-start movement, were acquired with a self-designing amplifier. The modes of muscle activity were also investigated. Secondly, the Young＇s modulus and the reduced relaxation function of crucian carp＇s skin and muscle were de- termined by failure tests and relaxation tests in uniaxial tensile ways, respectively. Viscoelastic models were adopted to deduce the constitutive relationship. The mechanical properties and the angular stiffness of different sites on the crucian carp＇s body trunk were obtained with dynamic bending experiments, where a self-designing dynamic bending test machine was employed. The conclusion was drawn regarding the body trunk of crucian carp under dynamic bending deformation as an approximate elastomer. According to the above experimental results, a possible benefit of body effective stiffness increasing with a little energy dissipation was discussed. Thirdly, the distribution of geometric parameters and weight parameters for a single experi- mental individual and multiple individuals of crucian carp was studied with experiments. Finally, considering all the above re- suits, generic experimental data were obtained by normalization, and a preliminary biomechanical ＂digital fish＂ database for crucian carp was established.展开更多
基金Project(50975163)supported by the National Natural Science Foundation of ChinaProject(IRT0931)supported by Program for Changjiang Scholars and Innovative Research Team in University of Ministry of Education of China
文摘The inherent mechanism of size effect in micro-sheet material behavior of plastic forming was explained by the surface layer model and theory of metal crystal plasticity. A size-dependant constitutive model based on the surface layer model was established by introducing the scale parameters and modifying the classical Hall-Petch equation. The influence of the geometric dimensions and the grain size on the flow behavior of the material was discussed using the new material constitutive model. The results show that, the flow stress decreases while the sheet metal thickness decreases when the grain size keeps constant, and the micro-sheet metal with a larger grain size is more easily to be influenced by the size effects. The material constitutive model established is validated by the stress-strain curve of the micro-sheet metal with different thicknesses derived from the tensile experiments. The rationality of the material model is verified by the fact that the calculation results are consistent with the experimental results.
基金Projects(5137550251305466) supported by the National Natural Science Foundation of China+2 种基金Project(2015CX002) supported by the Innovation-driven Plan in Central South University,ChinaProject(2013CB035801) supported by the National Basic Research Program of ChinaProject(2015NGQ001) supported by Key Laboratory of Efficient&Clean Energy Utilization,College of Hunan Province,China
文摘Effects of initial δ phase（Ni_3Nb） on the hot tensile deformation behaviors and material constants of a Ni-based superalloy were investigated over wide ranges of strain rate and deformation temperature. It is found that the true stress-true strain curves exhibit peak stress at a small strain, and the peak stress increases with the increase of initial δ phase. After the peak stress, initial δ phase promotes the dynamic softening behaviors, resulting in the decreased flow stress. An improved Arrhenius constitutive model is proposed to consider the synthetical effects of initial δ phase, deformation temperature, strain rate, and strain on hot deformation behaviors. In the improved model, material constants are expressed as the functions of the content of initial δ phase and strain. A good agreement between the predicted and measured results indicates that the improved Arrhenius constitutive model can well describe hot deformation behaviors of the studied Ni-based superalloy.
基金Projects (2010CB731701, 2012CB619502) supported by National Basic Research Program of ChinaProject (51021063) supported by Creative Research Group of National Natural Science Foundation of ChinaProject (CX2012B043) supported by Hunan Provincial Innovation Foundation for Postgraduate
文摘The influences of deformation conditions on grain structure and properties of 7085 aluminum alloy were investigated by optical microscopy and transmission electron microscopy in combination with tensile and fracture toughness tests. The results show that the volume fraction of dynamic recrystallization increased with the decrease of Zener-Hollomon （Z） parameter, and the volume fraction of static recrystallization increased with the increasing of Z parameter. The strength and fracture toughness of the alloy after solution and aging treatment first increased and then decreased with the increase of Z parameter. The microstructure map was established on the basis of microstructure evolution during deformation and solution heat treatment. The optimization deformation conditions were acquired under Z parameters of 1.2×10^10-9.1×10^12.
基金Projects(50671116,50901081) supported by the National Natural Science Foundation of China
文摘An 8 mm-high NiCoCrAlYTa coating was epitaxially built-up on a directionally solidified (DS) Ni-based superalloy blade tip by electro-spark deposition.Epitaxial morphologies of the coating and its microstructural characteristics were investigated by means of SEM,XRD and TEM etc.It is observed that the fine column-like dendrites originated from the γ'-particles or γ'-clusters of the DS substrate and are un-continuously coarsened.The β-phase particles precipitate and grow eutectically with the γ-phase.The orientation of fine column dendrites depends on electro-spark deposition processing parameters and the microstructure can be characterized with superfine γ and β phases.
基金Projects(2013CB036004,2011CB710601)supported by the National Basic Research Program of ChinaProject(51178468)supported by the National Natural Science Foundation of ChinaProject(CX2011B096)supported by Hunan Provincial Postgraduate Innovation Program,China
文摘Based on the analysis of several objective functions,a new method was proposed.Firstly,the feature of the inclination curve was analyzed.On this basis,the soil could be divided into several blocks with different displacements and deformations.Then,the method of the soil division was presented,and the characteristic of single soil block was studied.The displacement of the block had two components:sliding and deformation.Moreover,a new objective function was constructed according to the deformation of the soil block.Finally,the sensitivities of the objective functions by traditional method and the new method were calculated,respectively.The result shows that the new objective function is more sensitive to mechanical parameters and the inversion result is close to that obtained by the large direct shear apparatus.So,this method can be used in slope back analysis and its effectiveness is proved.
基金supported by the Open Project of Key Laboratory of Aircraft Environment Control and Life Support,MIIT(No.KLAECLS-E-202001)。
文摘To improve the comfortability and safety of aircraft,the demand of rectangular submerged inlets(RSIs)with low resistance is proposed to increase the inlet flow rate of ram air. A theoretical model is built to numerically analyze the effects of geometric parameters on the inlet mass flow rate of RSIs. The geometric parameters in question here encompass the aspect ratio of 2—4,the ramp angle of 6°—7°,the characteristic parameter of the throat of 0.20 —0.30,the ramp length of 939—1 337 mm,and the cone angle of 0° —3°. Simulation results demonstrate that the mass flow rate(MFR)is positively correlated with the aspect ratio,ramp angle,ramp length,and cone angle,and negatively correlated with characteristic parameter of the throat. Within the range of the geometric parameters considered,the RSI with the aspect ratio of 3,the ramp angle of 6°,the characteristic parameter of the throat of 0.20,the ramp length of 1 337 mm,and the cone angle of 3° obtains the largest MFR value of about 2.251 kg/s.
基金supported by the National Natural Science Foundation of China (Grant No. 10832010)the Knowledge Innovation Project of the Chinese Academy of Sciences (Grant No. KJCX2-YW-L05)
文摘Currently, the integrated biomechanical studies on fish locomotion come into focus, so it is urgent to provide reliable and sys- tematic experimental results, and to establish a biomechanical ＂digital fish＂ database for some typical fish species. Accord- ingly, based on the control framework of ＂Neural Control - Active Contraction of Muscle - Passive Deformation＂, the elec- tromyography （EMG） signals, the mechanical properties and the constitutive relationship of skin, muscle, and body trunk, as well as morphological parameters of crucian carp, are investigated with experiments, from which a simplified database of bio- mechanical ＂digital fish＂ is established. First, the EMG signals from three lateral superficial red muscles of crucian carp, which was evolving in the C-start movement, were acquired with a self-designing amplifier. The modes of muscle activity were also investigated. Secondly, the Young＇s modulus and the reduced relaxation function of crucian carp＇s skin and muscle were de- termined by failure tests and relaxation tests in uniaxial tensile ways, respectively. Viscoelastic models were adopted to deduce the constitutive relationship. The mechanical properties and the angular stiffness of different sites on the crucian carp＇s body trunk were obtained with dynamic bending experiments, where a self-designing dynamic bending test machine was employed. The conclusion was drawn regarding the body trunk of crucian carp under dynamic bending deformation as an approximate elastomer. According to the above experimental results, a possible benefit of body effective stiffness increasing with a little energy dissipation was discussed. Thirdly, the distribution of geometric parameters and weight parameters for a single experi- mental individual and multiple individuals of crucian carp was studied with experiments. Finally, considering all the above re- suits, generic experimental data were obtained by normalization, and a preliminary biomechanical ＂digital fish＂ database for crucian carp was established.
