The microstructures and interface structures of basalt particle reinforced 7A04 Al matrix composites (BP/7A04 Al) were analyzed by using OM, TEM, SEM and EDS, and the mechanical properties of 7A04 Al alloy were compar...The microstructures and interface structures of basalt particle reinforced 7A04 Al matrix composites (BP/7A04 Al) were analyzed by using OM, TEM, SEM and EDS, and the mechanical properties of 7A04 Al alloy were compared with those of BP/7A04 Al matrix composites. The results show that the basalt particles are dispersed in the Al matrix and form a strong bonding interface with the Al matrix. SiO2 at the edge of the basalt particles is continuously replaced by Al2O3 formed in the reaction, forming a high-temperature reaction layer with a thickness of several tens of nanometers, and Al2O3 strengthens the bonding interface between basalt particles and Al matrix. The dispersed basalt particles promote the dislocation multiplication, vacancy formation and precipitation of the matrix, and the precipitated phases mainly consist of plate-like η(MgZn2) phase and bright white band-shaped or ellipsoidal T (Al2Mg3Zn3) phase. The bonding interface, high dislocation density and dispersion strengthening phase significantly improve the mechanical properties of the composites. The yield strength and ultimate tensile strength of BP/7A04 Al matrix composites are up to 665 and 699 MPa, which increase by 11.4% and 10.9% respectively compared with 7A04 Al alloy without basalt particles.展开更多
Two contents(1.5%and3%)of TiB2nanoparticles were introduced in Al?Mn?Mg3004alloy to study their effects on theelevated-temperature properties.Results show that TiB2nanoparticles were mainly distributed at the interden...Two contents(1.5%and3%)of TiB2nanoparticles were introduced in Al?Mn?Mg3004alloy to study their effects on theelevated-temperature properties.Results show that TiB2nanoparticles were mainly distributed at the interdendritic grain boundarieswith a size range of20?80nm,which is confirmed by transmission electron microscopy(TEM)and X-ray diffraction(XRD).Therefore,the volume fraction of the dispersoid free zones is greatly reduced and the motion of grain boundaries and dislocations isinhibited more effectively at elevated temperature.After peak precipitation heat treatment,the yield strengths in the alloy with3%TiB2addition at room temperature and300°C were increased by20%and13%respectively,while the minimum creep rate at300°Cwas reduced to only1/5of the base alloy free of TiB2,exhibiting a considerable improvement of elevated-temperature properties inAl?Mn?Mg alloys.展开更多
In this work,we demonstrated the enhanced oxygen evolution reaction（OER） activity of flower-shaped cobalt-nickel oxide（NiCo_2O_4） decorated with iridium-nickel bimetal as an electrode material.The samples were pre...In this work,we demonstrated the enhanced oxygen evolution reaction（OER） activity of flower-shaped cobalt-nickel oxide（NiCo_2O_4） decorated with iridium-nickel bimetal as an electrode material.The samples were prepared by carefully depositing pre-synthesized IrNi nanopartides on the surfaces of the NiCo_2O_4 nano-flowers.Compared with bare NiCo_2O_4,IrNi,and IrNi/Co_3O_4,the IrNi/NiCo_2O_4 exhibited significantly enhanced electrocatalytic activity in the OER,including a lower overpotential of 210 mV and a higher current density at an overpotential of 540 mV.We found that the IrNi/NiCo_2O_4 showed more efficient electron transport behavior and reduced polarization because of its bimetal IrNi modification by analyzing its Tafel slope and turnover frequency.Furthermore,the electrocatalytic mechanism of IrNi/NiCo_2O_4 in the OER was studied,and it was found that the combined active sites of the composite effectively improved the rate determining step.The synergic effect of the bimetal and metal oxide plays an important role in this reaction,enhancing the transmission efficiency of electrons and providing more active sites for the OER.The results reveal that IrNi/NiCo_2O_4 is an excellent electrocatalyst for OER.展开更多
基金Projects(2019JJ60050,2018JJ3121) supported by the Natural Science Foundation of Hunan Province,ChinaProject(KFBM20170004) supported by the Jiangsu Province Key Laboratory of Materials Surface Science and Technology,China
文摘The microstructures and interface structures of basalt particle reinforced 7A04 Al matrix composites (BP/7A04 Al) were analyzed by using OM, TEM, SEM and EDS, and the mechanical properties of 7A04 Al alloy were compared with those of BP/7A04 Al matrix composites. The results show that the basalt particles are dispersed in the Al matrix and form a strong bonding interface with the Al matrix. SiO2 at the edge of the basalt particles is continuously replaced by Al2O3 formed in the reaction, forming a high-temperature reaction layer with a thickness of several tens of nanometers, and Al2O3 strengthens the bonding interface between basalt particles and Al matrix. The dispersed basalt particles promote the dislocation multiplication, vacancy formation and precipitation of the matrix, and the precipitated phases mainly consist of plate-like η(MgZn2) phase and bright white band-shaped or ellipsoidal T (Al2Mg3Zn3) phase. The bonding interface, high dislocation density and dispersion strengthening phase significantly improve the mechanical properties of the composites. The yield strength and ultimate tensile strength of BP/7A04 Al matrix composites are up to 665 and 699 MPa, which increase by 11.4% and 10.9% respectively compared with 7A04 Al alloy without basalt particles.
基金support from the Natural Sciences and Engineering Research Council of Canada(NSERC)and Rio Tinto,through the NSERC Industry Research Chair in Metallurgy of Aluminum Transformation at University of Quebec at Chicoutimi
文摘Two contents(1.5%and3%)of TiB2nanoparticles were introduced in Al?Mn?Mg3004alloy to study their effects on theelevated-temperature properties.Results show that TiB2nanoparticles were mainly distributed at the interdendritic grain boundarieswith a size range of20?80nm,which is confirmed by transmission electron microscopy(TEM)and X-ray diffraction(XRD).Therefore,the volume fraction of the dispersoid free zones is greatly reduced and the motion of grain boundaries and dislocations isinhibited more effectively at elevated temperature.After peak precipitation heat treatment,the yield strengths in the alloy with3%TiB2addition at room temperature and300°C were increased by20%and13%respectively,while the minimum creep rate at300°Cwas reduced to only1/5of the base alloy free of TiB2,exhibiting a considerable improvement of elevated-temperature properties inAl?Mn?Mg alloys.
基金supported by the National Natural Science Foundation of China(61371021 and 61671284)the support of Shanghai Education Commission(Peak Discipline Construction)
文摘In this work,we demonstrated the enhanced oxygen evolution reaction（OER） activity of flower-shaped cobalt-nickel oxide（NiCo_2O_4） decorated with iridium-nickel bimetal as an electrode material.The samples were prepared by carefully depositing pre-synthesized IrNi nanopartides on the surfaces of the NiCo_2O_4 nano-flowers.Compared with bare NiCo_2O_4,IrNi,and IrNi/Co_3O_4,the IrNi/NiCo_2O_4 exhibited significantly enhanced electrocatalytic activity in the OER,including a lower overpotential of 210 mV and a higher current density at an overpotential of 540 mV.We found that the IrNi/NiCo_2O_4 showed more efficient electron transport behavior and reduced polarization because of its bimetal IrNi modification by analyzing its Tafel slope and turnover frequency.Furthermore,the electrocatalytic mechanism of IrNi/NiCo_2O_4 in the OER was studied,and it was found that the combined active sites of the composite effectively improved the rate determining step.The synergic effect of the bimetal and metal oxide plays an important role in this reaction,enhancing the transmission efficiency of electrons and providing more active sites for the OER.The results reveal that IrNi/NiCo_2O_4 is an excellent electrocatalyst for OER.
