Structural health monitoring is widely utilized in outdoor environments,especially under harsh conditions,which can introduce noise into the monitoring system.Therefore,designing an effective denoising strategy to enh...Structural health monitoring is widely utilized in outdoor environments,especially under harsh conditions,which can introduce noise into the monitoring system.Therefore,designing an effective denoising strategy to enhance the performance of guided wave damage detection in noisy environments is crucial.This paper introduces a local temporal principal component analysis(PCA)reconstruction approach for denoising guided waves prior to implementing unsupervised damage detection,achieved through novel autoencoder-based reconstruction.Experimental results demonstrate that the proposed denoising method significantly enhances damage detection performance when guided waves are contaminated by noise,with SNR values ranging from 10 to-5 dB.Following the implementation of the proposed denoising approach,the AUC score can elevate from 0.65 to 0.96 when dealing with guided waves corrputed by noise at a level of-5 dB.Additionally,the paper provides guidance on selecting the appropriate number of components used in the denoising PCA reconstruction,aiding in the optimization of the damage detection in noisy conditions.展开更多
Method of testing for dynamic output forces from jet elements is studied, the handwidth is large in testing with this method. By establishing a model of the test system and simulating it, principles of how inherent fe...Method of testing for dynamic output forces from jet elements is studied, the handwidth is large in testing with this method. By establishing a model of the test system and simulating it, principles of how inherent features of the test system affect the dynamic force test are found out. Thus a theoretical foundation is given for the design and error modification to the actual test system.展开更多
[Objective] The study was to analyze the structure and function of HpaGXoo and the relationship between the two.[Method] Some related bioinformatics analysis software on internet such as NPSA,Swiss-Model,SAPS and Inte...[Objective] The study was to analyze the structure and function of HpaGXoo and the relationship between the two.[Method] Some related bioinformatics analysis software on internet such as NPSA,Swiss-Model,SAPS and InterPro Scan were adopted to analyze the structure and predict its function.[Result] HpaGXoo consists of 139 amino acids,and has many alpha-helical and coiled structure,no signal peptide on N-terminal and no transmembrane structure.It locates in bacterial cytoplasm.[Conclusion] The study will lay ...展开更多
This paper presents an urban expressway video surveillance and monitoring system for traffic flow measurement and abnormal performance detection. The proposed flow detection module collects traffic flow statistics in ...This paper presents an urban expressway video surveillance and monitoring system for traffic flow measurement and abnormal performance detection. The proposed flow detection module collects traffic flow statistics in real time by leveraging multi-vehicle tracking information. Based on these online statistics, road operating situations can be easily obtained. Using spatiotemporal trajectories, vehicle motion paths are encoded by hidden Markov models. With path division and parameter matching, abnormal performances containing extra low or high speed driving, illegal stopping and turning are detected in real scenes. The traffic surveillance approach is implemented and evaluated on a DM642 DSP-based embedded platform. Experimental results demonstrate that the proposed system is feasible for the detection of vehicle speed, vehicle counts and road efficiency, and it is effective for the monitoring of the aforementioned anomalies with low computational costs.展开更多
Acoustic emission （AE） sensors are used to monitor tool conditions in micro-milling operations. Together with the microphone, the AE sensor can detect the tool breakage more accurately and more effectively by applyi...Acoustic emission （AE） sensors are used to monitor tool conditions in micro-milling operations. Together with the microphone, the AE sensor can detect the tool breakage more accurately and more effectively by applying the wavelet analysis. The processed tool breakage technique by AE sensor is used to perform the wavelet analysis on the experimental data. Results indicate the feasibility of using the AE signals for monitoring the tool condition in micro-milling.展开更多
[Objective] This study aimed to establish models based on atmospheric cir- culation indices for forecasting the area attacked by rice planthopper every year, and to provide guide for preventing and controlling plantho...[Objective] This study aimed to establish models based on atmospheric cir- culation indices for forecasting the area attacked by rice planthopper every year, and to provide guide for preventing and controlling planthopper damage. [Method] The data related to rice planthopper occurrence and atmospheric circulation were collected and analyzed with the method of stepwise regression to establish the prediction models. [Result] The factors significantly related to the area attacked by rice plan-thopper were selected. Two types of prediction models were established. One was for Sogatella furcifera （Horvath）, based on Atlantic-Europe circulation pattern W in October in that year, Pacific polar vortex area index in October in that year, North America subtropical high index in August in that year, Atlantic-Europe circulation pattern W in June in that year, northern boundary of North America subtropical high in February in that year, Atlantic-Europe polar vortex intensity index in October in that year and Asia polar vortex intensity index in November in the last year; the other type of prediction models were for Nilaparvata lugens （Stal）, based on the Eastern Pacific subtropical high intensity index in July in that year, northern hemi- sphere polar vortex area index in October in the last year, Asia polar vortex strength index in November in the last year, north boundary of North America-At- lantic subtropical high in September in that year, north boundary of North Africa-At- lantic-North America subtropical high in January in that year, sunspot in September of the last year and eastern Pacific subtropical high area index in September in that year. [Conclusion] With the stepwise regression, the forecasting equations of the rice planthopper occurrence established based on the atmospheric circulation indices could be used for actual forecast.展开更多
A method to check impurities in food grain based on digital image processing is proposed in this study. According to the feature of the impurity, one image with twice processing is put forward based on blob analysis, ...A method to check impurities in food grain based on digital image processing is proposed in this study. According to the feature of the impurity, one image with twice processing is put forward based on blob analysis, which eliminates impurities that were brighter or darker than normal particles. With the image processing system developed by Matrox Imaging Library, black and white blobs are extracted for twice with one function, and then the size and the position of impurities are calculated quickly through mathematical morphologic and blob analysis. The method can be extended and applied in other fields due to its advantages of quick speed and high accuracy.展开更多
[ Objective ] The study aimed to reveal the genetic model of a biomass mutant in Oryza sativa. [ Method ] In the process of screening and identification of Bar-transgenic rice, a biomass mutant was found in 10 lines o...[ Objective ] The study aimed to reveal the genetic model of a biomass mutant in Oryza sativa. [ Method ] In the process of screening and identification of Bar-transgenic rice, a biomass mutant was found in 10 lines of T1 progenies. The mutant was investigated for genetic analysis and agronomic traits by herbicide spraying and PCR amplification. [ Result] The segregation ratio is consistent with mendelian law（3：1）. The mutant assumed not only higher plant height, wider straw and earlier florescence, but also more tillers, bigger spikes and resultantly higher biomass. PCR detections indicated that no co-segregation was observed between mutant traits and target gene（Bar） in the T-DNA inserted, proving that the mutant is not caused by the insertion of T-DNA containing target gene （Bar）. [ Conclusion] Our study may avail to understand the cloning of mutant gene and the mechanism of the mutant gene on biomass.展开更多
Aim To derive the error formulae for the algorithm of frequency response computation. Methods This algorithm was introduced theoretically, the error sources of the algorithm were analyzed and the formulae of the mai...Aim To derive the error formulae for the algorithm of frequency response computation. Methods This algorithm was introduced theoretically, the error sources of the algorithm were analyzed and the formulae of the main error were derived. Results The repeatability and stability of the processing results of the algorithm are better than those measured by 1250 Frequency Analysor. Conclusion The error formulae derived are theoretically right and practically valid.展开更多
Aiming at the problem of on-line damage diagnosis in structural health monitoring （SHM）, an algorithm of feature extraction and damage alarming based on auto-regressive moving-average （ARMA） time series analysis i...Aiming at the problem of on-line damage diagnosis in structural health monitoring （SHM）, an algorithm of feature extraction and damage alarming based on auto-regressive moving-average （ARMA） time series analysis is presented. The monitoring data were first modeled as ARMA models, while a principalcomponent matrix derived from the AR coefficients of these models was utilized to establish the Mahalanobisdistance criterion functions. Then, a new damage-sensitive feature index DDSF is proposed. A hypothesis test involving the t-test method is further applied to obtain a decision of damage alarming as the mean value of DDSF had significantly changed after damage. The numerical results of a three-span-girder model shows that the defined index is sensitive to subtle structural damage, and the proposed algorithm can be applied to the on-line damage alarming in SHM.展开更多
The dynamic monitoring of landslides in engineering geology has focused on the correlation among landslide stability,rainwater infiltration,and subsurface hydrogeology.However,the understanding of this complicated cor...The dynamic monitoring of landslides in engineering geology has focused on the correlation among landslide stability,rainwater infiltration,and subsurface hydrogeology.However,the understanding of this complicated correlation is still poor and inadequate.Thus,in this study,we investigated a typical landslide in southwestern China via time-lapse electrical resistivity tomography（TLERT） in November 2013 and August 2014.We studied landslide mechanisms based on the spatiotemporal characteristics of surface water infiltration and flow within the landslide body.Combined with borehole data,inverted resistivity models accurately defined the interface between Quaternary sediments and bedrock.Preferential flow pathways attributed to fracture zones and fissures were also delineated.In addition,we found that surface water permeates through these pathways into the slipping mass and drains away as fissure water in the fractured bedrock,probably causing the weakly weathered layer to gradually soften and erode,eventually leading to a landslide.Clearly,TLERT dynamic monitoring can provide precursory information of critical sliding and can be used in landslide stability analysis and prediction.展开更多
At the early stages of deep-water oil exploration and development, fewer and further apart wells are drilled than in onshore oilfields. Supervised least squares support vector machine algorithms are used to predict th...At the early stages of deep-water oil exploration and development, fewer and further apart wells are drilled than in onshore oilfields. Supervised least squares support vector machine algorithms are used to predict the reservoir parameters but the prediction accuracy is low. We combined the least squares support vector machine （LSSVM） algorithm with semi-supervised learning and established a semi-supervised regression model, which we call the semi-supervised least squares support vector machine （SLSSVM） model. The iterative matrix inversion is also introduced to improve the training ability and training time of the model. We use the UCI data to test the generalization of a semi-supervised and a supervised LSSVM models. The test results suggest that the generalization performance of the LSSVM model greatly improves and with decreasing training samples the generalization performance is better. Moreover, for small-sample models, the SLSSVM method has higher precision than the semi-supervised K-nearest neighbor （SKNN） method. The new semi- supervised LSSVM algorithm was used to predict the distribution of porosity and sandstone in the Jingzhou study area.展开更多
Using the high sensitivity to initial values of chaotic systems, this paper describes an application of chaos in the field of measurement. A general method for signal coding based on symbolic sequences and the relatio...Using the high sensitivity to initial values of chaotic systems, this paper describes an application of chaos in the field of measurement. A general method for signal coding based on symbolic sequences and the relationship between the variable (to be measured) and its symbolic sequence are presented. Some performances of the chaos based measurement system are also discussed. Theoretical analysis and experimental results show that chaotic systems are potentially attractive in the field of measurement.展开更多
基金National Science Foundation of Zhejiang under Contract(LY23E010001)。
文摘Structural health monitoring is widely utilized in outdoor environments,especially under harsh conditions,which can introduce noise into the monitoring system.Therefore,designing an effective denoising strategy to enhance the performance of guided wave damage detection in noisy environments is crucial.This paper introduces a local temporal principal component analysis(PCA)reconstruction approach for denoising guided waves prior to implementing unsupervised damage detection,achieved through novel autoencoder-based reconstruction.Experimental results demonstrate that the proposed denoising method significantly enhances damage detection performance when guided waves are contaminated by noise,with SNR values ranging from 10 to-5 dB.Following the implementation of the proposed denoising approach,the AUC score can elevate from 0.65 to 0.96 when dealing with guided waves corrputed by noise at a level of-5 dB.Additionally,the paper provides guidance on selecting the appropriate number of components used in the denoising PCA reconstruction,aiding in the optimization of the damage detection in noisy conditions.
文摘Method of testing for dynamic output forces from jet elements is studied, the handwidth is large in testing with this method. By establishing a model of the test system and simulating it, principles of how inherent features of the test system affect the dynamic force test are found out. Thus a theoretical foundation is given for the design and error modification to the actual test system.
基金Supported by Langfang Teachers College Research Grant(LSZB200803)~~
文摘[Objective] The study was to analyze the structure and function of HpaGXoo and the relationship between the two.[Method] Some related bioinformatics analysis software on internet such as NPSA,Swiss-Model,SAPS and InterPro Scan were adopted to analyze the structure and predict its function.[Result] HpaGXoo consists of 139 amino acids,and has many alpha-helical and coiled structure,no signal peptide on N-terminal and no transmembrane structure.It locates in bacterial cytoplasm.[Conclusion] The study will lay ...
基金The National Key Technology R&D Program of China during the 11th Five-Year Plan Period(No.2009BAG13A04)Jiangsu Transportation Science Research Program(No.08X09)Program of Suzhou Science and Technology(No.SG201076)
文摘This paper presents an urban expressway video surveillance and monitoring system for traffic flow measurement and abnormal performance detection. The proposed flow detection module collects traffic flow statistics in real time by leveraging multi-vehicle tracking information. Based on these online statistics, road operating situations can be easily obtained. Using spatiotemporal trajectories, vehicle motion paths are encoded by hidden Markov models. With path division and parameter matching, abnormal performances containing extra low or high speed driving, illegal stopping and turning are detected in real scenes. The traffic surveillance approach is implemented and evaluated on a DM642 DSP-based embedded platform. Experimental results demonstrate that the proposed system is feasible for the detection of vehicle speed, vehicle counts and road efficiency, and it is effective for the monitoring of the aforementioned anomalies with low computational costs.
基金Supported by the National Natural Science Foundation of China (50775114)the Natural Scienc Foundation of Jiangsu Province (BK2007198)~~
文摘Acoustic emission （AE） sensors are used to monitor tool conditions in micro-milling operations. Together with the microphone, the AE sensor can detect the tool breakage more accurately and more effectively by applying the wavelet analysis. The processed tool breakage technique by AE sensor is used to perform the wavelet analysis on the experimental data. Results indicate the feasibility of using the AE signals for monitoring the tool condition in micro-milling.
基金Supported by Special Fund for Agro-scientific Research in the Public Interest(200903051)~~
文摘[Objective] This study aimed to establish models based on atmospheric cir- culation indices for forecasting the area attacked by rice planthopper every year, and to provide guide for preventing and controlling planthopper damage. [Method] The data related to rice planthopper occurrence and atmospheric circulation were collected and analyzed with the method of stepwise regression to establish the prediction models. [Result] The factors significantly related to the area attacked by rice plan-thopper were selected. Two types of prediction models were established. One was for Sogatella furcifera （Horvath）, based on Atlantic-Europe circulation pattern W in October in that year, Pacific polar vortex area index in October in that year, North America subtropical high index in August in that year, Atlantic-Europe circulation pattern W in June in that year, northern boundary of North America subtropical high in February in that year, Atlantic-Europe polar vortex intensity index in October in that year and Asia polar vortex intensity index in November in the last year; the other type of prediction models were for Nilaparvata lugens （Stal）, based on the Eastern Pacific subtropical high intensity index in July in that year, northern hemi- sphere polar vortex area index in October in the last year, Asia polar vortex strength index in November in the last year, north boundary of North America-At- lantic subtropical high in September in that year, north boundary of North Africa-At- lantic-North America subtropical high in January in that year, sunspot in September of the last year and eastern Pacific subtropical high area index in September in that year. [Conclusion] With the stepwise regression, the forecasting equations of the rice planthopper occurrence established based on the atmospheric circulation indices could be used for actual forecast.
文摘A method to check impurities in food grain based on digital image processing is proposed in this study. According to the feature of the impurity, one image with twice processing is put forward based on blob analysis, which eliminates impurities that were brighter or darker than normal particles. With the image processing system developed by Matrox Imaging Library, black and white blobs are extracted for twice with one function, and then the size and the position of impurities are calculated quickly through mathematical morphologic and blob analysis. The method can be extended and applied in other fields due to its advantages of quick speed and high accuracy.
文摘[ Objective ] The study aimed to reveal the genetic model of a biomass mutant in Oryza sativa. [ Method ] In the process of screening and identification of Bar-transgenic rice, a biomass mutant was found in 10 lines of T1 progenies. The mutant was investigated for genetic analysis and agronomic traits by herbicide spraying and PCR amplification. [ Result] The segregation ratio is consistent with mendelian law（3：1）. The mutant assumed not only higher plant height, wider straw and earlier florescence, but also more tillers, bigger spikes and resultantly higher biomass. PCR detections indicated that no co-segregation was observed between mutant traits and target gene（Bar） in the T-DNA inserted, proving that the mutant is not caused by the insertion of T-DNA containing target gene （Bar）. [ Conclusion] Our study may avail to understand the cloning of mutant gene and the mechanism of the mutant gene on biomass.
文摘Aim To derive the error formulae for the algorithm of frequency response computation. Methods This algorithm was introduced theoretically, the error sources of the algorithm were analyzed and the formulae of the main error were derived. Results The repeatability and stability of the processing results of the algorithm are better than those measured by 1250 Frequency Analysor. Conclusion The error formulae derived are theoretically right and practically valid.
基金The National High Technology Research and Devel-opment Program of China (863Program) (No2006AA04Z416)the National Natural Science Foundation of China (No50538020)
文摘Aiming at the problem of on-line damage diagnosis in structural health monitoring （SHM）, an algorithm of feature extraction and damage alarming based on auto-regressive moving-average （ARMA） time series analysis is presented. The monitoring data were first modeled as ARMA models, while a principalcomponent matrix derived from the AR coefficients of these models was utilized to establish the Mahalanobisdistance criterion functions. Then, a new damage-sensitive feature index DDSF is proposed. A hypothesis test involving the t-test method is further applied to obtain a decision of damage alarming as the mean value of DDSF had significantly changed after damage. The numerical results of a three-span-girder model shows that the defined index is sensitive to subtle structural damage, and the proposed algorithm can be applied to the on-line damage alarming in SHM.
基金funded by the National Basic Research Program of China(973 Program)(No.2013CB733203)the National Natural Science Foundation of China(No.41474055)
文摘The dynamic monitoring of landslides in engineering geology has focused on the correlation among landslide stability,rainwater infiltration,and subsurface hydrogeology.However,the understanding of this complicated correlation is still poor and inadequate.Thus,in this study,we investigated a typical landslide in southwestern China via time-lapse electrical resistivity tomography（TLERT） in November 2013 and August 2014.We studied landslide mechanisms based on the spatiotemporal characteristics of surface water infiltration and flow within the landslide body.Combined with borehole data,inverted resistivity models accurately defined the interface between Quaternary sediments and bedrock.Preferential flow pathways attributed to fracture zones and fissures were also delineated.In addition,we found that surface water permeates through these pathways into the slipping mass and drains away as fissure water in the fractured bedrock,probably causing the weakly weathered layer to gradually soften and erode,eventually leading to a landslide.Clearly,TLERT dynamic monitoring can provide precursory information of critical sliding and can be used in landslide stability analysis and prediction.
基金supported by the "12th Five Year Plan" National Science and Technology Major Special Subject:Well Logging Data and Seismic Data Fusion Technology Research(No.2011ZX05023-005-006)
文摘At the early stages of deep-water oil exploration and development, fewer and further apart wells are drilled than in onshore oilfields. Supervised least squares support vector machine algorithms are used to predict the reservoir parameters but the prediction accuracy is low. We combined the least squares support vector machine （LSSVM） algorithm with semi-supervised learning and established a semi-supervised regression model, which we call the semi-supervised least squares support vector machine （SLSSVM） model. The iterative matrix inversion is also introduced to improve the training ability and training time of the model. We use the UCI data to test the generalization of a semi-supervised and a supervised LSSVM models. The test results suggest that the generalization performance of the LSSVM model greatly improves and with decreasing training samples the generalization performance is better. Moreover, for small-sample models, the SLSSVM method has higher precision than the semi-supervised K-nearest neighbor （SKNN） method. The new semi- supervised LSSVM algorithm was used to predict the distribution of porosity and sandstone in the Jingzhou study area.
文摘Using the high sensitivity to initial values of chaotic systems, this paper describes an application of chaos in the field of measurement. A general method for signal coding based on symbolic sequences and the relationship between the variable (to be measured) and its symbolic sequence are presented. Some performances of the chaos based measurement system are also discussed. Theoretical analysis and experimental results show that chaotic systems are potentially attractive in the field of measurement.
