Conductive polymer composites(CPCs)are widely used in the flexible strain sensors due to their simple fabrication process and controllable sensing properties.However,temperature has a significance impact on the strain...Conductive polymer composites(CPCs)are widely used in the flexible strain sensors due to their simple fabrication process and controllable sensing properties.However,temperature has a significance impact on the strain sensing performance of CPCs.In this paper,the strain sensing characteristics of MWCNTs/PDMS composites under temperature loading were systematically studied.It was found that the sensitivity decreased with the increase of temperature and the phenomenon of shoulder peak also decreased.Based on the theory of polymer mechanics,it was found that temperature could affect the conductive network by changing the motion degree of PDMS molecular chain,resulting in the change of sensing characteristics.Finally,a mathematical model of the resistance against loading condition(strain and temperature),associated with the force−electrical equivalent relationship of composites,was established to discuss the experimental results as well as the sensing mechanism.The results presented in this paper was believed helpful for the further application of strain sensors in different temperature conditions.展开更多
Significant efforts have been devoted to enhancing the sensitivity and working range of flexible pressure sensors to improve the precise measurement of subtle variations in pressure over a wide detection spectrum. How...Significant efforts have been devoted to enhancing the sensitivity and working range of flexible pressure sensors to improve the precise measurement of subtle variations in pressure over a wide detection spectrum. However,achieving sensitivities exceeding 1000 kPa^(-1) while maintaining a pressure working range over 100 kPa is still challenging because of the limited intrinsic properties of soft matrix materials. Here, we report a magnetic field-induced porous elastomer with micropillar arrays(MPAs) as sensing materials and a well-patterned nickel fabric as an electrode. The developed sensor exhibits an ultrahigh sensitivity of 10,268 kPa^(-1)(0.6–170 kPa) with a minimum detection pressure of 0.25 Pa and a fast response time of 3 ms because of the unique structure of the MPAs and the textured morphology of the electrode. The porous elastomer provides an extended working range of up to 500 kPa with long-time durability. The sophisticated sensor system coupled with an integrated wireless recharging system comprising a flexible supercapacitor and inductive coils for transmission achieves excellent performance. Thus, a diverse range of practical applications requiring a low-to-high pressure range sensing can be developed. Our strategy, which combines a microstructured high-performance sensor device with a wireless recharging system, provides a basis for creating next-generation flexible electronics.展开更多
Flexible and wearable sensors have drawn ex-tensive concern due to their wide potential applications inwearable electronics and intelligent robots. Flexible sensorswith high sensRivity, good flexibility, and excellent...Flexible and wearable sensors have drawn ex-tensive concern due to their wide potential applications inwearable electronics and intelligent robots. Flexible sensorswith high sensRivity, good flexibility, and excellent stabilityare highly desirable for monitoring human biomedical signals,movements and the environment. The active materials and thedevice structures are the keys to achieve high performance.Carbon nanomaterials, including carbon nanotubes （CNTs）,graphene, carbon black and carbon nanofibers, are one of themost commonly used active materials for the fabrication ofhigh-performance flexible sensors due to their superiorproperties. Especially, CNTs and graphene can be assembledinto various multi-scaled macroscopic structures, includingone dimensional fibers, two dimensional films and three di-mensional architectures, endowing the facile design of flexiblesensors for wide practical applications. In addition, the hybridstructured carbon materials derived from natural bio-mate-rials also showed a bright prospect for applications in flexiblesensors. This review provides a comprehensive presentation offlexible and wearable sensors based on the above variouscarbon materials. Following a brief introduction of flexiblesensors and carbon materials, the fundamentals of typicalflexible sensors, such as strain sensors, pressure sensors,temperature sensors and humidity sensors, are presented.Then, the latest progress of flexible sensors based on carbonmaterials, including the fabrication processes, performanceand applications, are summarized. Finally, the remainingmajor challenges of carbon-based flexible electronics are dis-cussed and the future research directions are proposed.展开更多
By using two separate components, mem-sensing devices can be fabricated combining the sensitivity of a transducer with non-volatile memory. Here, we discuss how a mem-sensor can be fabricated using a single material w...By using two separate components, mem-sensing devices can be fabricated combining the sensitivity of a transducer with non-volatile memory. Here, we discuss how a mem-sensor can be fabricated using a single material with built- in sensing andmemory capabilities, based on ZnO microwires （MWs） embedded in a photocurable resin and processed from liquid by vertically aligning the MWs across the polymeric matrix using dielectrophoresis. This results in an ultraviolet （UV） photodetector, a device telecommunication, health, and defense, that is widely applied in fields such as and has so far implemented using bulk inorganic semiconductors. However, inorganic detectors suffer from very high production costs, brittleness, huge equipment requirements, and low responsivity. Here, we propose for the first time aneasy processable, reproducible, and low- cost hybrid UV mem-sensor. Composites with aligned ZnO MWs produce giant photocurrentscompared to the same composites with randomly distributed MWs. In particular, we efficiently exploit a mere-response where the photocurrent carries memory of the last electronic state experienced by the device when under testing. Furthermore, we demonstrate the non-equivalence of different wave profiles used during thedielectrophoresis： a pulsed wave is able to induce order in both the axis and the orientation of the MWs, whereas a sine wave only affects the orientation.展开更多
基金Project(ZZYJKT2019-05)supported by State Key Laboratory of High Performance Complex Manufacturing,ChinaProject(51605497)supported by the National Natural Science Foundation of ChinaProject(2020CX05)supported by Innovation-Driven Project of Central South University,China。
文摘Conductive polymer composites(CPCs)are widely used in the flexible strain sensors due to their simple fabrication process and controllable sensing properties.However,temperature has a significance impact on the strain sensing performance of CPCs.In this paper,the strain sensing characteristics of MWCNTs/PDMS composites under temperature loading were systematically studied.It was found that the sensitivity decreased with the increase of temperature and the phenomenon of shoulder peak also decreased.Based on the theory of polymer mechanics,it was found that temperature could affect the conductive network by changing the motion degree of PDMS molecular chain,resulting in the change of sensing characteristics.Finally,a mathematical model of the resistance against loading condition(strain and temperature),associated with the force−electrical equivalent relationship of composites,was established to discuss the experimental results as well as the sensing mechanism.The results presented in this paper was believed helpful for the further application of strain sensors in different temperature conditions.
基金supported by the National Natural Science Foundation of China (61904141)the Funding of the Natural Science Foundation of Shaanxi Province (2020JQ-295)+2 种基金China Postdoctoral Science Foundation (2020M673340)the Key Research and Development Program of Shaanxi (2020GY-252)the National Key Laboratory of Science and Technology on Vacuum Technology and Physics (HTKJ2019KL510007)。
文摘Significant efforts have been devoted to enhancing the sensitivity and working range of flexible pressure sensors to improve the precise measurement of subtle variations in pressure over a wide detection spectrum. However,achieving sensitivities exceeding 1000 kPa^(-1) while maintaining a pressure working range over 100 kPa is still challenging because of the limited intrinsic properties of soft matrix materials. Here, we report a magnetic field-induced porous elastomer with micropillar arrays(MPAs) as sensing materials and a well-patterned nickel fabric as an electrode. The developed sensor exhibits an ultrahigh sensitivity of 10,268 kPa^(-1)(0.6–170 kPa) with a minimum detection pressure of 0.25 Pa and a fast response time of 3 ms because of the unique structure of the MPAs and the textured morphology of the electrode. The porous elastomer provides an extended working range of up to 500 kPa with long-time durability. The sophisticated sensor system coupled with an integrated wireless recharging system comprising a flexible supercapacitor and inductive coils for transmission achieves excellent performance. Thus, a diverse range of practical applications requiring a low-to-high pressure range sensing can be developed. Our strategy, which combines a microstructured high-performance sensor device with a wireless recharging system, provides a basis for creating next-generation flexible electronics.
基金supported by the National Natural Science Foundation of China(51672153,51422204 and 51372132)National Key Basic Research and Development Program(2016YFA0200103 and 2013CB228506)
文摘Flexible and wearable sensors have drawn ex-tensive concern due to their wide potential applications inwearable electronics and intelligent robots. Flexible sensorswith high sensRivity, good flexibility, and excellent stabilityare highly desirable for monitoring human biomedical signals,movements and the environment. The active materials and thedevice structures are the keys to achieve high performance.Carbon nanomaterials, including carbon nanotubes （CNTs）,graphene, carbon black and carbon nanofibers, are one of themost commonly used active materials for the fabrication ofhigh-performance flexible sensors due to their superiorproperties. Especially, CNTs and graphene can be assembledinto various multi-scaled macroscopic structures, includingone dimensional fibers, two dimensional films and three di-mensional architectures, endowing the facile design of flexiblesensors for wide practical applications. In addition, the hybridstructured carbon materials derived from natural bio-mate-rials also showed a bright prospect for applications in flexiblesensors. This review provides a comprehensive presentation offlexible and wearable sensors based on the above variouscarbon materials. Following a brief introduction of flexiblesensors and carbon materials, the fundamentals of typicalflexible sensors, such as strain sensors, pressure sensors,temperature sensors and humidity sensors, are presented.Then, the latest progress of flexible sensors based on carbonmaterials, including the fabrication processes, performanceand applications, are summarized. Finally, the remainingmajor challenges of carbon-based flexible electronics are dis-cussed and the future research directions are proposed.
文摘By using two separate components, mem-sensing devices can be fabricated combining the sensitivity of a transducer with non-volatile memory. Here, we discuss how a mem-sensor can be fabricated using a single material with built- in sensing andmemory capabilities, based on ZnO microwires （MWs） embedded in a photocurable resin and processed from liquid by vertically aligning the MWs across the polymeric matrix using dielectrophoresis. This results in an ultraviolet （UV） photodetector, a device telecommunication, health, and defense, that is widely applied in fields such as and has so far implemented using bulk inorganic semiconductors. However, inorganic detectors suffer from very high production costs, brittleness, huge equipment requirements, and low responsivity. Here, we propose for the first time aneasy processable, reproducible, and low- cost hybrid UV mem-sensor. Composites with aligned ZnO MWs produce giant photocurrentscompared to the same composites with randomly distributed MWs. In particular, we efficiently exploit a mere-response where the photocurrent carries memory of the last electronic state experienced by the device when under testing. Furthermore, we demonstrate the non-equivalence of different wave profiles used during thedielectrophoresis： a pulsed wave is able to induce order in both the axis and the orientation of the MWs, whereas a sine wave only affects the orientation.
