基于有机场效应晶体管的可穿戴柔性监测设备在生物医学领域的研究现状

介绍了基于有机场效应晶体管(organic field effect transistor,OFET)技术的柔性半导体器件的工作原理和发展概况,综述了基于OFET的生物力学监测设备、文身生物监测设备、细胞检测设备等可穿戴柔性监测设备的研究现状,分析了基于OFET的可穿戴柔性监测设备存在的不足,指出了微型化、个性化、多元化等是未来基于OFET的可穿戴柔性监测设备的发展方向。

基于Agent技术的电网谐波监测系统设计与开发

随着经济的发展、高新技术产业的崛起以及传统产业的转型,电力电子和计算机装置在电力系统中得到了广泛应用。电网的非线性负荷不断增加,大量谐波分量注入电网,不仅严重威胁电力设备的安全运行,增加了线损,影响了计量,同时也对电力设备造成干扰甚至损坏,治理和预防谐波污染刻不容缓。文章设计了一个电网络谐波监测系统,其采用Agent技术和数字信号处理技术,具有灵活性、精确性、开放性和共享性等优点。

Ultrasensitive stretchable patches for joint motion monitoring

Wearable devices have great application potential in the next generation of smart portable electronics,especially in the fields of medical monitoring,soft robotics,artificial intelligence,and human-machine interfaces.Piezoelectric flexible strain sensors are key components of wearable devices.However,existing piezoelectric flexible strain sensors have certain limitations in weak signal monitoring due to their large modulus and low sensitivity.To solve this problem,the concept of Kirigami(paper-cutting)was introduced in this study to design the sensor structure.By comparing the Kirigami structures of different basic structures,the serpentine structure was determined as the basic configuration of the sensor.The serpentine structure not only provides excellent tensile properties,but also significantly improves the sensitivity of the sensor,which performs well in monitoring weak signals.On this basis,the adhesion properties of the flexible sensor were analyzed and tested,and the optimal ratio of the substrate was selected for preparation.In addition,a low-cost and rapid prototyping process for stretchable patches was established in this study.Using this technology,we prepared the sensor device and tested its performance.Finally,we successfully developed a flexible sensor with a sensitivity of 0.128 mV/μɛand verified its feasibility for wrist joint motion monitoring applications.This result opens up new avenues for the recovery care of tenosynovitis patients after surgery.

A Study on the Monitoring System for the FMS

Introduces a new monitoring method in FMS explicated in some detail by means of the MSF(Monitoring System of FMS)under development by the au- thors.In order to push FMS technology forword,enhance machining flexibility and the flexibility of human operaters and equipment in a FMS,the authors have made some breakthroughs in traditional ways of single item,unit monitoring and self-han- dling,and suggested the idea of integrated inspection and put the MSF into more practicability.The working status of FMS can be monitored on the CRT of a micro- computer of the MSF,system troubles will be shown with icons,by the flash of the system characteristic symbol or by alarming,and so on.This explores a new way for FMS inspection in a wholly integrated manner.

Controllable formation of periodic wrinkles in Marangoni-driven self-assembled graphene film for sensitive strain detection

Controllable formation of microstructures in the assembled graphene film could tune the physical properties and broaden its applications in flexible electronics.Many efforts have been made to control the formation of wrinkles and ripples in graphene films.However,the formation of orderly wrinkles in graphene film remains a challenge.Here,we reported a simple strategy for the fabrication of graphene film with periodic and parallel wrinkles with a pre-stretched polydimethylsiloxane substrate.The width of the wrinkles in graphene can be controlled by changing the pre-stretched strain of the substrate.The average width of wrinkles in graphene film on the substrate with pre-stretched strain of 10%,20%,and 50%was about 3.68,2.99 and 2.01µm,respectively.The morphological evolution of wrinkled double-layered graphene under mechanical deformation was observed and studied.Furthermore,a strain sensor was constructed based on the wrinkled graphene,showing high sensitivity,large working range and excellent cyclic stability.These strain sensors show great potential in real-time motion detection,health surveillance and electronic skins.