期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
界面自由度柔性等效与子结构频响函数综合方法 被引量:3
1
作者 张勇 侯之超 赵永玲 《振动与冲击》 EI CSCD 北大核心 2017年第17期200-205,254,共7页
针对频响函数子结构综合法中由于转角自由度频响函数缺失造成的综合建模误差较大的问题,提出了界面自由度柔性等效方法。将界面分为若干子界面,假定子界面刚性,通过最小二乘坐标变换,提取可描述子界面特征的6自由度分量,据此实现对子界... 针对频响函数子结构综合法中由于转角自由度频响函数缺失造成的综合建模误差较大的问题,提出了界面自由度柔性等效方法。将界面分为若干子界面,假定子界面刚性,通过最小二乘坐标变换,提取可描述子界面特征的6自由度分量,据此实现对子界面的刚性等效,综合所有子界面的等效自由度即形成界面的柔性等效。利用等效后的界面柔性自由度与原界面自由度的关系,对子结构的原始频响函数进行相应地变换,并将其应用到子结构频响函数综合方法中。仿真结果表明,将界面自由度进行柔性等效能明显提高频响函数的综合精度。 展开更多
关键词 频响函数子结构综合 界面自由度 柔性等效
下载PDF
平面折展机构S形柔性铰链设计与试验 被引量:18
2
作者 邱丽芳 孟天祥 +1 位作者 张九俏 杨德斌 《农业机械学报》 EI CAS CSCD 北大核心 2014年第9期324-328,323,共6页
设计平面折展柔顺机构的关键技术之一是设计柔性铰链。提出了一种用于平面折展柔顺机构的S形柔性铰链,设计了该铰链的结构形式,并对其等效刚度进行了分析,推导出该结构形式铰链的弯曲等效刚度和扭转等效刚度计算公式。通过设计实例的理... 设计平面折展柔顺机构的关键技术之一是设计柔性铰链。提出了一种用于平面折展柔顺机构的S形柔性铰链,设计了该铰链的结构形式,并对其等效刚度进行了分析,推导出该结构形式铰链的弯曲等效刚度和扭转等效刚度计算公式。通过设计实例的理论计算和有限元仿真分析,验证了计算公式和仿真模型的正确性。制作了基于S形柔性铰链的平面折展柔顺滑块机构的实物模型,仿真分析和测试结果表明,该机构在工作状态可具有较大变形,并且滑块位移达到76 mm时仍能保持良好的精度,仿真与测试结果基本一致,误差仅为0.76%。 展开更多
关键词 平面折展机构 S 柔性铰链等效刚度 平面折展滑块机构
下载PDF
Vibration characteristics of bogie hunting motion based on root loci curves 被引量:1
3
作者 Qinghua Guan Xing Du +2 位作者 Zefeng Wen Shulin Liang and Maoru Chi 《Acta Mechanica Sinica》 SCIE EI CAS CSCD 2022年第2期165-180,I0005,共17页
Vibration behaviors of bogie hunting motion contain key information that dominates the dynamic performance of rail vehicles,in which the eigenvalue of each mode reflects the damping ratio and the natural frequency.Thi... Vibration behaviors of bogie hunting motion contain key information that dominates the dynamic performance of rail vehicles,in which the eigenvalue of each mode reflects the damping ratio and the natural frequency.This paper focuses on the root loci curves of bogie hunting motion,starting from a rigid bogie,then to a bogie with flexible primary suspension.With regard to the rigid bogie,analytical formulas for the eigenvalues,the critical speed as well as the corresponding hunting frequency are derived and verified.While for the flexible bogie,the root loci curves are calculated numerically.The study shows that both free rigid bogie and free wheelset are dynamically unstable at any speed.The critical speed increases with diminished wheel-rail conicity,track gauge,and wheelset and bogie inertia,and with increased wheelbase and wheel radius.The dominating factors such as the stiffness of the primary suspension and the wheel-rail conicity should be optimized for a practical design.The influences of the damping coefficients and the variations of creep coefficients are negligible.The motor suspension affects the root loci curves and the critical speed significantly.Both inappropriate motor suspension design and rigidly suspended motor reduce the critical speed.The increase of critical speed by a motor suspension can only be achieved when the lower natural frequency of the motor-bogie frame-wheelsets system coincides with or is close to the hunting frequency.Special care should be taken for the design of motor suspension,the first is to avoid the decreased damping ratio in a certain speed range below the critical speed and the second is that the variations of parameters should not induce the rapid reduction of the critical speed.The main feature of the present study is that the root loci curves,which are derived as analytical formulas or calculated numerically,are used to study the vibrational behaviors of bogie hunting motion.Both the influencing laws of the dominating parameters and the principles regarding the motor suspension are significant for the stability design of modem railway vehicles which may use innovative structures/materials as well as modem control and monitoring technologies. 展开更多
关键词 Bogie hunting Root loci Critical speed Logarithmic decrement Motor suspension
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部