期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
磁流变液可控刚度柔顺表面的研究 被引量:2
1
作者 钱林俊 龚兴龙 张培强 《功能材料》 EI CAS CSCD 北大核心 2006年第7期1160-1162,共3页
机器人手爪等各种特殊夹具在适应特殊夹持需求时需要用到刚度可控的柔顺表面。本文用智能材料磁流变液,利用连通器的原理,设计了以活塞为基本构成单元的具有可控刚度的柔顺表面。以该柔顺表面为主制成的夹具能有效地增大接触面积,降低... 机器人手爪等各种特殊夹具在适应特殊夹持需求时需要用到刚度可控的柔顺表面。本文用智能材料磁流变液,利用连通器的原理,设计了以活塞为基本构成单元的具有可控刚度的柔顺表面。以该柔顺表面为主制成的夹具能有效地增大接触面积,降低接触应力,增加摩擦力,从而可以防止夹伤或夹坏被夹持物,并且提高夹持的稳固度。 展开更多
关键词 磁流变液 柔顺表面 可控刚度
下载PDF
宏观构筑基元表面柔顺性的调控与组装 被引量:2
2
作者 刘崇现 张倩 +2 位作者 张亚军 成梦娇 石峰 《科学通报》 EI CAS CSCD 北大核心 2018年第34期3650-3657,共8页
宏观超分子组装的研究对象是表面修饰有大量超分子识别基团的10μm以上的宏观构筑基元,以及它们之间基于超分子多重相互作用的碰撞、识别和组装的过程,它是超分子化学的新兴研究方向,为体相超分子材料的制备提供了新的思路.宏观构筑基... 宏观超分子组装的研究对象是表面修饰有大量超分子识别基团的10μm以上的宏观构筑基元,以及它们之间基于超分子多重相互作用的碰撞、识别和组装的过程,它是超分子化学的新兴研究方向,为体相超分子材料的制备提供了新的思路.宏观构筑基元的表面柔顺性是决定构筑基元间能否通过多重相互作用,增强相互作用,实现组装的关键要素之一.本文从界面间相互作用出发,通过交替层状自组装方法,在刚性聚二甲基硅氧烷(PDMS)构筑基元表面分别构筑不同层数的聚电解质多层膜,以调控宏观构筑基元的表面柔顺性,并研究聚电解质多层膜层数对于宏观构筑基元组装行为的影响.通过研究在水中叠加组装的时间与聚电解质多层膜层数的关系,我们发现当构筑基元表面修饰的聚电解质多层膜层数较少时,经过长时间叠加也不能发生组装;随着构筑基元表面修饰的聚电解质多层膜层数的增加,可以在较短的时间内叠加实现组装.同时对构筑基元之间的相互作用力随时间的变化进行了原位测量,其力值与上述组装行为一致.本工作验证了"具有高柔性表面是宏观超分子组装的设计原则",说明通过调控构筑基元表面柔顺性可以调控其宏观组装行为. 展开更多
关键词 宏观超分子组装 聚电解质多层膜 表面柔顺 主客体超分子作用
原文传递
Energy expenditure and muscular activation patterns through active sitting on compliant surfaces 被引量:1
3
作者 D.Clark Dickin Rachel K.Surowiec Henry Wang 《Journal of Sport and Health Science》 SCIE 2017年第2期207-212,共6页
Purpose: To test the effectiveness of sitting surfaces with varied amounts of stability on muscle activity and energy expenditure.Methods: Using a within-participants repeated measures design, 11 healthy young-adult f... Purpose: To test the effectiveness of sitting surfaces with varied amounts of stability on muscle activity and energy expenditure.Methods: Using a within-participants repeated measures design, 11 healthy young-adult females(age = 20.0 ± 1.8 years) were measured using indirect calorimetry to assess energy expenditure, and electromyography to assess muscular activation in trunk and leg musculature under 3different sitting surfaces: flat-firm surface, air-filled cushion, and a stability ball. Data were analyzed using repeated measures analysis of variance with follow-up pairwise contrasts used to determine the specific effects of sitting surface on muscle activation and energy expenditure.Results: Significantly greater energy expenditure was recorded for the stability ball(p = 0.01) and the cushion(p = 0.03) over the flat surface(10.4% and 9.6% greater, respectively), with no differences between the ball and the cushion. Both the ball and the cushion produced higher tibialis anterior activation over the flat surface(1.09 and 0.63 root-mean-square millivolts(RMSmv), respectively), while the stability ball produced higher soleus activity over both cushion and flat surfaces(3.97 and 4.24 RMSmv, respectively). Additionally, the cushion elicited higher adductor longus activity over the ball and flat surfaces(1.76 and 1.81 RMSmv, respectively), but no trunk musculature differences were revealed.Conclusion: Compliant surfaces resulted in higher levels of muscular activation in the lower extremities facilitating increased caloric expenditure.Given the increasing trends in sedentary careers and the increases in obesity, this is an important finding to validate the merits of active sitting facilitating increased caloric expenditure and muscle activation. 展开更多
关键词 Energy metabolism ELECTROMYOGRAPHY Female POSTURE Sedentary lifestyle WORKPLACE
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部