本研究以建立保健食品中有机氯农药残留量的测定为目的。样品经石油醚提取,浓缩、酸化后,以弹性石英毛细管柱DB-1701(30 m×0.32mm×0.25μm),63Ni-ECD电子捕获检测器,以及六六六(BHC)、滴滴涕(DDT)及其同分异构体有机氯农药为...本研究以建立保健食品中有机氯农药残留量的测定为目的。样品经石油醚提取,浓缩、酸化后,以弹性石英毛细管柱DB-1701(30 m×0.32mm×0.25μm),63Ni-ECD电子捕获检测器,以及六六六(BHC)、滴滴涕(DDT)及其同分异构体有机氯农药为对照品,配制成正己烷溶液,进样口温度:230℃;检测器温度:300℃;分流比:1/10;柱流量:1.00 m L/min;程序升温:初始100℃,每分钟10℃升至220℃,再每分钟8℃升至250℃,展开更多
The characteristics of the dual bluff body vortex shedding is investigated, and the possibility to use dual bluff body combinations to strengthen the hydrodynamic vibration around the bluff body objects is explored. T...The characteristics of the dual bluff body vortex shedding is investigated, and the possibility to use dual bluff body combinations to strengthen the hydrodynamic vibration around the bluff body objects is explored. The numerical and experimental approaches were utilized to examine the time dependent flow field and the pressure oscillation around the bluff bodies. The numerical data were obtained by the advanced large eddy simulation
model. The experiment was conducted on a laboratory scale of Karman vortex flowmeter with 40 mm diameter. It is revealed that the optimized dual bluff body combinations strengthened the hydrodynamic vibration. It was also found that the hydrodynamic vibration with 180° phase difference occurred at the axisymmetric points of circular pipe on the lateral faces of the equilateral triangle-section bluff bodies. Using the dual bluff body configuration and the differential sensing technique, a novel prototype of vortex flowmeter with excellent noise immunity and improved sensibility was developed.展开更多
This paper presents a method to create concept models for the tapered thin-walled tubes using beam elements and spring elements.Developed concept tapered beam models with different taper angles and cross sections are ...This paper presents a method to create concept models for the tapered thin-walled tubes using beam elements and spring elements.Developed concept tapered beam models with different taper angles and cross sections are compared with those detailed models through impact analyses.Important crash results are recorded and compared,and the relatively good agreement is achieved between these analyses.Concept modeling steps are illustrated in detail,and a general concept modeling method for such thin-walled tubes is summarized and presented.展开更多
文摘本研究以建立保健食品中有机氯农药残留量的测定为目的。样品经石油醚提取,浓缩、酸化后,以弹性石英毛细管柱DB-1701(30 m×0.32mm×0.25μm),63Ni-ECD电子捕获检测器,以及六六六(BHC)、滴滴涕(DDT)及其同分异构体有机氯农药为对照品,配制成正己烷溶液,进样口温度:230℃;检测器温度:300℃;分流比:1/10;柱流量:1.00 m L/min;程序升温:初始100℃,每分钟10℃升至220℃,再每分钟8℃升至250℃,
基金Supported by the National Natural Science Foundation of China (No. 59835160) and Scientific Research Foundation of State Education Ministry for Returned Overseas Chinese Scholars.
文摘The characteristics of the dual bluff body vortex shedding is investigated, and the possibility to use dual bluff body combinations to strengthen the hydrodynamic vibration around the bluff body objects is explored. The numerical and experimental approaches were utilized to examine the time dependent flow field and the pressure oscillation around the bluff bodies. The numerical data were obtained by the advanced large eddy simulation
model. The experiment was conducted on a laboratory scale of Karman vortex flowmeter with 40 mm diameter. It is revealed that the optimized dual bluff body combinations strengthened the hydrodynamic vibration. It was also found that the hydrodynamic vibration with 180° phase difference occurred at the axisymmetric points of circular pipe on the lateral faces of the equilateral triangle-section bluff bodies. Using the dual bluff body configuration and the differential sensing technique, a novel prototype of vortex flowmeter with excellent noise immunity and improved sensibility was developed.
文摘This paper presents a method to create concept models for the tapered thin-walled tubes using beam elements and spring elements.Developed concept tapered beam models with different taper angles and cross sections are compared with those detailed models through impact analyses.Important crash results are recorded and compared,and the relatively good agreement is achieved between these analyses.Concept modeling steps are illustrated in detail,and a general concept modeling method for such thin-walled tubes is summarized and presented.