Finite element(FEM)analysis was used to systematically evaluate the inhomogeneity of deformation in cylindrical samples with various sample-anvil friction coefficients,m.It was found that the level of friction strongl...Finite element(FEM)analysis was used to systematically evaluate the inhomogeneity of deformation in cylindrical samples with various sample-anvil friction coefficients,m.It was found that the level of friction strongly influences the deformation homogeneity,which increases significantly with the friction coefficient although the overall geometry of the samples almost remains the same when m >0.4.The position,at which the effective strain along the maximum radial direction in a compressed sample is equal to the equivalent strain of the sample,does not vary greatly with respect to both equivalent strain of the sample and m.Hardness measurements of compressed cylindrical 5056B Al alloy samples revealed a change of effective strain distribution similar to that revealed by FEM analysis.There exists a quantitative relationship between the hardness and the effective strain if no recrystallization or recovery occurs during the compression process.展开更多
Using 3D Langevin dynamics simulations, we investigate the effects of the shape of crowders on the dynamics of a polymer chain closure. The chain closure in spherical crowders is dominated by the increased medium visc...Using 3D Langevin dynamics simulations, we investigate the effects of the shape of crowders on the dynamics of a polymer chain closure. The chain closure in spherical crowders is dominated by the increased medium viscosity so that it gets slower with the increasing volume fraction of crowders. By contrast, the dynamics of chain closure becomes very complicated with increasing volume fraction of crowders in spherocylindrical crowders. Notably, the mean closure time is found to have a dramatic decrease at a range of volume fraction of crowders 0.36-0.44. We then elucidate that an isotropic to nematic transition of spherocylindrical crowders at this range of volume fraction of crowders is responsible for the unexpected dramatic decrease in the mean closure time.展开更多
A stiffened cylindrical shell is normally used in refuge chambers of a coal mine. Based on the method of application and shape characteristics of a refuge chamber, we simplified its shell as an orthotropic cylinder. T...A stiffened cylindrical shell is normally used in refuge chambers of a coal mine. Based on the method of application and shape characteristics of a refuge chamber, we simplified its shell as an orthotropic cylinder. The basic buckling equation of the stiffened cylindrical shell under uniform axial compression was deduced by using a Donnell function. The factors affecting its buckling capacity were studied by theoretical analysis and numerical calculations. The results reveal that the torsional rigidity of the longitudinal stiffener had little effect on the buckling capacity of the shell and that the critical load of an externally stiffened cylindrical shell is higher than that of an internally stiffened cylindrical shell.展开更多
Flavobacterium columnare is the pathogenic agent of columnaris disease in aquaculture. Using a recently developed gene deletion strategy, two genes that encode the Glyco hydro_19 domain （GH19 domain） containing prot...Flavobacterium columnare is the pathogenic agent of columnaris disease in aquaculture. Using a recently developed gene deletion strategy, two genes that encode the Glyco hydro_19 domain （GH19 domain） containing proteins, ghd-1 and ghd-2, were deleted separately and together from the F. columnare G4 wild type strain. Surprisingly, the single-, Aghd-1 and Aghd-2, and double-gene mutants, Aghd-1 Aghd-2, all had rhizoid and non-rhizoid colony morphotypes, which we named Aghd-1, Aghd-2, Aghd-1 Aghd-2, and NAghd-1, NAghd-2, and NAghd-1 Aghd-2. However, chitin utilization was not detected in either these mutants or in the wild type. Instead, skimmed milk degradation was observed for the mutants and the wild type; the non-rhizoid strain NAghd-2 exhibited higher degradation activity as revealed by the larger transparent circle on the skimmed milk plate. Using zebrafish as the model organism, we found that non-rhizoid mutants had higher LDs0 values and were less virulent because zebrafish infected with these survived longer. Transcriptome analysis between the non-rhizoid and rhizoid colony morphotypes of each mutant, i.e., NAghd-1 versus （vs） Aghd-1, NAghd-2 vs Aghd-2, and NAghd-1 Aghd-2 vs Aghd-1 Aghd-2, revealed a large number of differentially expressed genes, among which 39 genes were common in three of the pairs compared. Although most of these genes encode hypothetical proteins, a few molecules such as phage tail protein, rhs element Vgr protein, thiol-activated cytolysin, and TonB-dependent outer membrane receptor precursor, expression of which was down-regulated in non-rhizoid mutants but up-regulated in rhizoid mutants, may play a role F. columnare virulence.展开更多
A new approach that models lift and drag hydrodynamic force signals operating over cylindrical structures was developed and validated. This approach is based on stochastic auto regressive moving average with exogenous...A new approach that models lift and drag hydrodynamic force signals operating over cylindrical structures was developed and validated. This approach is based on stochastic auto regressive moving average with exogenous （ARMAX） input and its time-varying form, TARMAX. Model structure selection and parameter estimation were discussed while considering the validation stage. In this papel; the cylindrical structure was considered as a dynamic system with an incoming water wave and resulting forces as the input and outputs, respectively. The experimental data, used in this study, were collected from a full-scale rough vertical cylinder at the Delft Hydraulics Laboratory. The practicality of the proposed method and also its efficiency in structural modeling were demonstrated through applying two hydrodynamic force components. For this purpose, an ARMAX model is first used to capture the dynamics of the process, relating in-line forces provided by water waves; secondly, the TARMAX model was applied to modeling and analysis of the lift forces on the cylinder. The evaluation of the lift force by the TARMAX model shows the model is successful in modeling the force from the surface elevation.展开更多
In this study, a three-dimensional model based on RANS, slender-body theory and Newton-Euler dynamics is established to study the number concentration, one of the most important fluidization characteristics of cylindr...In this study, a three-dimensional model based on RANS, slender-body theory and Newton-Euler dynamics is established to study the number concentration, one of the most important fluidization characteristics of cylindrical particles. Also, the effects of interaction between cylindrical particles are taken into account by introducing the rigid collision dynamics. To validate the model, the fluidization experiments of cylindrical particles in a cold-state fluidized bed are carried out. The number concentration characteristics of cylindrical particles are obtained from computational fluid dynamics (CFD) simulation. It is found that cylindrical particles arriving at the exit of the riser the earliest come from the near-wall regions, the horizontal transfer of so many cylindrical particles from the radial centre regions to the near-wall regions is evident. Meanwhile, there is no distinct relationship between the number concentration and inlet wind velocity.展开更多
A roll-bending process that minimizes the flat areas on the leading and trailing ends of formed plates will produce more accurate and easier assemble final shapes. There are several methods of minimizing flat areas, b...A roll-bending process that minimizes the flat areas on the leading and trailing ends of formed plates will produce more accurate and easier assemble final shapes. There are several methods of minimizing flat areas, but they are costly or difficult to apply for thick plates. This study proposes a new, simple approach that reduces these flat areas. This approach includes moving the bottom roll slightly along the feeding direction and adjusting the bottom roll location. Sensitivity analyses were performed using a developed 3D dynamic FE （finite element） model of an asymmetrical roll-bending process in the Ansys/LS-Dyna software package. Simulations were validated by experiments run on an instrumented roll-bending machine. The FE results indicate that this new approach not only minimizes the flat areas but also reduces the forming forces.展开更多
Fiber Reinforced Polymer （FRP） composites are an effective material for strengthening circular concrete columns. The effectiveness of FRP confinement for square and rectangular columns is greatly reduced due to stre...Fiber Reinforced Polymer （FRP） composites are an effective material for strengthening circular concrete columns. The effectiveness of FRP confinement for square and rectangular columns is greatly reduced due to stress concentrations at the sharp comers and loss of the membrane effect at the fiat sides of the cross-section. Shape modification can eliminate the effects of column comers and flat sides, and thereby restore the membrane effect and improve the compressive behavior of FRP-confined square and rectangular concrete columns. Shape modification using chemical post-tensioning, achieved by using expansive cement concrete, is described and several mix designs for obtaining the optimal level of expansion are presented. In addition, parametric studies regarding the optimal geometry of the shape-modified cross-section are presented utilizing the analytical model.展开更多
基金Project(2016JJ1016) supported by the Science Fund for Distinguished Young Scholars of Hunan Province,ChinaProject(201301G0105337290) supported by the Program of Innovation and Entrepreneur Team Introduced by Guangdong Province,China
文摘Finite element(FEM)analysis was used to systematically evaluate the inhomogeneity of deformation in cylindrical samples with various sample-anvil friction coefficients,m.It was found that the level of friction strongly influences the deformation homogeneity,which increases significantly with the friction coefficient although the overall geometry of the samples almost remains the same when m >0.4.The position,at which the effective strain along the maximum radial direction in a compressed sample is equal to the equivalent strain of the sample,does not vary greatly with respect to both equivalent strain of the sample and m.Hardness measurements of compressed cylindrical 5056B Al alloy samples revealed a change of effective strain distribution similar to that revealed by FEM analysis.There exists a quantitative relationship between the hardness and the effective strain if no recrystallization or recovery occurs during the compression process.
基金This work is supported by the Fundamental Research Funds for the Central Universities of China （No.WK2060200020） and the China Postdoctoral Science Foundation （No.2015M581998）.
文摘Using 3D Langevin dynamics simulations, we investigate the effects of the shape of crowders on the dynamics of a polymer chain closure. The chain closure in spherical crowders is dominated by the increased medium viscosity so that it gets slower with the increasing volume fraction of crowders. By contrast, the dynamics of chain closure becomes very complicated with increasing volume fraction of crowders in spherocylindrical crowders. Notably, the mean closure time is found to have a dramatic decrease at a range of volume fraction of crowders 0.36-0.44. We then elucidate that an isotropic to nematic transition of spherocylindrical crowders at this range of volume fraction of crowders is responsible for the unexpected dramatic decrease in the mean closure time.
基金Financial support from the National Hi-tech Research and Development Program of China is much appreciated
文摘A stiffened cylindrical shell is normally used in refuge chambers of a coal mine. Based on the method of application and shape characteristics of a refuge chamber, we simplified its shell as an orthotropic cylinder. The basic buckling equation of the stiffened cylindrical shell under uniform axial compression was deduced by using a Donnell function. The factors affecting its buckling capacity were studied by theoretical analysis and numerical calculations. The results reveal that the torsional rigidity of the longitudinal stiffener had little effect on the buckling capacity of the shell and that the critical load of an externally stiffened cylindrical shell is higher than that of an internally stiffened cylindrical shell.
基金Supported by the Chinese Academy of Sciences(No.XDA08010207)the National Key Technology R&D Program of China(No.2012BAD25B02)the State Key Laboratory of Freshwater Ecology and Biotechnology(No.2016FBZ04)
文摘Flavobacterium columnare is the pathogenic agent of columnaris disease in aquaculture. Using a recently developed gene deletion strategy, two genes that encode the Glyco hydro_19 domain （GH19 domain） containing proteins, ghd-1 and ghd-2, were deleted separately and together from the F. columnare G4 wild type strain. Surprisingly, the single-, Aghd-1 and Aghd-2, and double-gene mutants, Aghd-1 Aghd-2, all had rhizoid and non-rhizoid colony morphotypes, which we named Aghd-1, Aghd-2, Aghd-1 Aghd-2, and NAghd-1, NAghd-2, and NAghd-1 Aghd-2. However, chitin utilization was not detected in either these mutants or in the wild type. Instead, skimmed milk degradation was observed for the mutants and the wild type; the non-rhizoid strain NAghd-2 exhibited higher degradation activity as revealed by the larger transparent circle on the skimmed milk plate. Using zebrafish as the model organism, we found that non-rhizoid mutants had higher LDs0 values and were less virulent because zebrafish infected with these survived longer. Transcriptome analysis between the non-rhizoid and rhizoid colony morphotypes of each mutant, i.e., NAghd-1 versus （vs） Aghd-1, NAghd-2 vs Aghd-2, and NAghd-1 Aghd-2 vs Aghd-1 Aghd-2, revealed a large number of differentially expressed genes, among which 39 genes were common in three of the pairs compared. Although most of these genes encode hypothetical proteins, a few molecules such as phage tail protein, rhs element Vgr protein, thiol-activated cytolysin, and TonB-dependent outer membrane receptor precursor, expression of which was down-regulated in non-rhizoid mutants but up-regulated in rhizoid mutants, may play a role F. columnare virulence.
文摘A new approach that models lift and drag hydrodynamic force signals operating over cylindrical structures was developed and validated. This approach is based on stochastic auto regressive moving average with exogenous （ARMAX） input and its time-varying form, TARMAX. Model structure selection and parameter estimation were discussed while considering the validation stage. In this papel; the cylindrical structure was considered as a dynamic system with an incoming water wave and resulting forces as the input and outputs, respectively. The experimental data, used in this study, were collected from a full-scale rough vertical cylinder at the Delft Hydraulics Laboratory. The practicality of the proposed method and also its efficiency in structural modeling were demonstrated through applying two hydrodynamic force components. For this purpose, an ARMAX model is first used to capture the dynamics of the process, relating in-line forces provided by water waves; secondly, the TARMAX model was applied to modeling and analysis of the lift forces on the cylinder. The evaluation of the lift force by the TARMAX model shows the model is successful in modeling the force from the surface elevation.
基金Supported by the Natural Science Fund for Colleges and Universities in Jiangsu Province(2011112TSJ0149)Jiangsu Key Laboratory of Process Enhancement & New Energy Equipment Technology at Nanjing University of Technology,China
文摘In this study, a three-dimensional model based on RANS, slender-body theory and Newton-Euler dynamics is established to study the number concentration, one of the most important fluidization characteristics of cylindrical particles. Also, the effects of interaction between cylindrical particles are taken into account by introducing the rigid collision dynamics. To validate the model, the fluidization experiments of cylindrical particles in a cold-state fluidized bed are carried out. The number concentration characteristics of cylindrical particles are obtained from computational fluid dynamics (CFD) simulation. It is found that cylindrical particles arriving at the exit of the riser the earliest come from the near-wall regions, the horizontal transfer of so many cylindrical particles from the radial centre regions to the near-wall regions is evident. Meanwhile, there is no distinct relationship between the number concentration and inlet wind velocity.
文摘A roll-bending process that minimizes the flat areas on the leading and trailing ends of formed plates will produce more accurate and easier assemble final shapes. There are several methods of minimizing flat areas, but they are costly or difficult to apply for thick plates. This study proposes a new, simple approach that reduces these flat areas. This approach includes moving the bottom roll slightly along the feeding direction and adjusting the bottom roll location. Sensitivity analyses were performed using a developed 3D dynamic FE （finite element） model of an asymmetrical roll-bending process in the Ansys/LS-Dyna software package. Simulations were validated by experiments run on an instrumented roll-bending machine. The FE results indicate that this new approach not only minimizes the flat areas but also reduces the forming forces.
文摘Fiber Reinforced Polymer （FRP） composites are an effective material for strengthening circular concrete columns. The effectiveness of FRP confinement for square and rectangular columns is greatly reduced due to stress concentrations at the sharp comers and loss of the membrane effect at the fiat sides of the cross-section. Shape modification can eliminate the effects of column comers and flat sides, and thereby restore the membrane effect and improve the compressive behavior of FRP-confined square and rectangular concrete columns. Shape modification using chemical post-tensioning, achieved by using expansive cement concrete, is described and several mix designs for obtaining the optimal level of expansion are presented. In addition, parametric studies regarding the optimal geometry of the shape-modified cross-section are presented utilizing the analytical model.
