One of the most basic characteristics of photonic crystal is frequency band gap. When defects are introduced into the periodic photonic crystal, a number of defect modes appear in the stop band. In this paper, we expl...One of the most basic characteristics of photonic crystal is frequency band gap. When defects are introduced into the periodic photonic crystal, a number of defect modes appear in the stop band. In this paper, we exploit transfer matrix method based on photonic crystal theory, and assume the sampled fiber Bragg grating as one-dimensional dual photonic crystal with a large size defect. Characteristics of the sampled fiber Bragg grating are analyzed. Experimental results show that the sampled fiber Bragg grating has many reflective peaks. Its reflectivity, center wavelength, reflective peak intervals and band width all change with the grating parameters, including grating length, duty ratio of the material with high dielectric constant, and index modulation depth and period. Results agree with the conventional couple mode theory which can be used when analyzing other characteristics of the sampled fiber Bragg grating or applying it into practice.展开更多
Using photonic crystals (PCs), the extraction efficiency of the light-emitting diodes (LEDs) can be greatly enhanced by the effects of photonic band gap (PBG) and grating diffraction. The two theoretical methods are a...Using photonic crystals (PCs), the extraction efficiency of the light-emitting diodes (LEDs) can be greatly enhanced by the effects of photonic band gap (PBG) and grating diffraction. The two theoretical methods are also discussed. Meanwhile, we demonstrate that LEDs can achieve high extraction efficiency by employing photonic crystal as diffraction grating. PCs with square lattice of cylindrical unit cells are fabricated in GaN layer of GaN-based blue LED. We present a theoretical discussion on the extraction efficiency of PC-LED, which relies on the effective medium theory and transmission matrix method to investigate the effect of lattice constant. The results show that the extraction efficiency of the high performance LEDs can achieve 61.8% when the lattice constant is 270 nm.展开更多
An optical fiber sensor for strain and temperature measurement based on long period fiber grating(LPFG) cascaded with fiber Bragg grating(FBG) structure has been proposed and realized both theoretically and experiment...An optical fiber sensor for strain and temperature measurement based on long period fiber grating(LPFG) cascaded with fiber Bragg grating(FBG) structure has been proposed and realized both theoretically and experimentally. Theoretical analysis shows that two microstructures with similar sensitivities cannot be used for double parameters measurement. The LPFG is micromachined by the CO_2 laser, and the FBG is micromachined by the excimer laser. For the validation and comparison, two FBGs and one LPFG are cascaded with three transmission valleys, namely FBG1 valley at 1 536.3 nm, LPFG valley at 1 551.2 nm, and FBG2 valley at 1 577.3 nm. The temperature and strain characteristics of the proposed sensor are measured at 45—70 °C and 250—500 με, respectively. The sensitivity matrix is determined by analyzing wavelength shifts and parameter response characterization of three different dips. The proposed optical fiber sensor based on LPFG cascaded with FBG structure can be efficiently used for double parameters measurement with promising application prospect and great research reference value.展开更多
文摘One of the most basic characteristics of photonic crystal is frequency band gap. When defects are introduced into the periodic photonic crystal, a number of defect modes appear in the stop band. In this paper, we exploit transfer matrix method based on photonic crystal theory, and assume the sampled fiber Bragg grating as one-dimensional dual photonic crystal with a large size defect. Characteristics of the sampled fiber Bragg grating are analyzed. Experimental results show that the sampled fiber Bragg grating has many reflective peaks. Its reflectivity, center wavelength, reflective peak intervals and band width all change with the grating parameters, including grating length, duty ratio of the material with high dielectric constant, and index modulation depth and period. Results agree with the conventional couple mode theory which can be used when analyzing other characteristics of the sampled fiber Bragg grating or applying it into practice.
基金supported by the National Natural Science Foundation of China (No.60877047)the Natural Science Foundation of Hebei Province (No.2010002002)
文摘Using photonic crystals (PCs), the extraction efficiency of the light-emitting diodes (LEDs) can be greatly enhanced by the effects of photonic band gap (PBG) and grating diffraction. The two theoretical methods are also discussed. Meanwhile, we demonstrate that LEDs can achieve high extraction efficiency by employing photonic crystal as diffraction grating. PCs with square lattice of cylindrical unit cells are fabricated in GaN layer of GaN-based blue LED. We present a theoretical discussion on the extraction efficiency of PC-LED, which relies on the effective medium theory and transmission matrix method to investigate the effect of lattice constant. The results show that the extraction efficiency of the high performance LEDs can achieve 61.8% when the lattice constant is 270 nm.
基金supported by the Program for Changjiang Scholars and Innovative Research Team in University(No.IRT_16R07)the Project Plan of Beijing Municipal Education Commission for Enhancing the Innovation Capability in 2015(No.TJSHG201510772016)the Open Project of Beijing Engineering Research Center of Optoelectronic Information and Instruments(No.GD2016008)
文摘An optical fiber sensor for strain and temperature measurement based on long period fiber grating(LPFG) cascaded with fiber Bragg grating(FBG) structure has been proposed and realized both theoretically and experimentally. Theoretical analysis shows that two microstructures with similar sensitivities cannot be used for double parameters measurement. The LPFG is micromachined by the CO_2 laser, and the FBG is micromachined by the excimer laser. For the validation and comparison, two FBGs and one LPFG are cascaded with three transmission valleys, namely FBG1 valley at 1 536.3 nm, LPFG valley at 1 551.2 nm, and FBG2 valley at 1 577.3 nm. The temperature and strain characteristics of the proposed sensor are measured at 45—70 °C and 250—500 με, respectively. The sensitivity matrix is determined by analyzing wavelength shifts and parameter response characterization of three different dips. The proposed optical fiber sensor based on LPFG cascaded with FBG structure can be efficiently used for double parameters measurement with promising application prospect and great research reference value.
