Over the past decade,national standard and industry standard of bio-fertilizer have been gradually established in China. Moreover,the microbial fertilizer standard system with Chinese characteristics has been firstly ...Over the past decade,national standard and industry standard of bio-fertilizer have been gradually established in China. Moreover,the microbial fertilizer standard system with Chinese characteristics has been firstly established by China in the world. Development of bio-fertilizer standard,especially the amplification and modification of bio-fertilizer product standard and the construction of bio-fertilizer standard system,etc. were summarized in this paper. Meanwhile,relative suggestions of existing problems were put forward.展开更多
Satellite communication networks have been evolving from standalone networks with ad-hoc infrastructures to possibly interconnected portions of a wider Future Internet architecture. Experts belonging to the fifth-gene...Satellite communication networks have been evolving from standalone networks with ad-hoc infrastructures to possibly interconnected portions of a wider Future Internet architecture. Experts belonging to the fifth-generation(5 G) standardization committees are considering satellites as a technology to integrate in the 5 G environment. Software Defined Networking(SDN) is one of the paradigms of the next generation of mobile and fixed communications. It can be employed to perform different control functionalities, such as routing, because it allows traffic flow identification based on different parameters and traffic flow management in a centralized way. A centralized set of controllers makes the decisions and sends the corresponding forwarding rules for each traffic flow to the involved intermediate nodes that practically forward data up to the destination. The time to perform this process in integrated terrestrial-satellite networks could be not negligible due to satellite link delays. The aim of this paper is to introduce an SDN-based terrestrial satellite network architecture and to estimate the mean time to deliver the data of a new traffic flow from the source to the destination including the time required to transfer SDN control actions. The practical effect is to identify the maximum performance than can be expected.展开更多
As BIM （building information modeling） became the gold standard of the architecture, construction, and engineering industry, lack of skilled BIM professionals is considered one of the major challenges. It is theref...As BIM （building information modeling） became the gold standard of the architecture, construction, and engineering industry, lack of skilled BIM professionals is considered one of the major challenges. It is therefore of significant importance that CM （construction management） programs train future construction professionals in the capabilities and advantages of BIM technology. This paper presents the findings of a comprehensive review of the implementation of BIM education in CM programs and summarizes the process of BIM adoption, existing educational approaches, and identified challenges in the implementation process. The information presented in this paper serves as a guide to CM programs that are new to and in the progress of implementing BIM education.展开更多
A 4th-order low-pass filter （LPF） based on active-Gm-RC structure for multi-standard system application is presented in this paper. The performances of LPF are controlled by a 1-bit control- voltage, and the cut-off...A 4th-order low-pass filter （LPF） based on active-Gm-RC structure for multi-standard system application is presented in this paper. The performances of LPF are controlled by a 1-bit control- voltage, and the cut-off frequency, channel selectivity, and linearity of the proposed filter can be reconfigured accordingly. In order to improve the accuracy of the cut-off frequency, a binary-weigh- ted switched-capacitor array is employed as the auto-tuning circuits to calibrate the RC-time con- stant. Fabricated in TSMC 0. 18μm RF CMOS process, the proposed LPF achieves a measured cutoff frequency of 1.95 and 12.3MHz for WCDMA and GPS/Galileo application with a bandwidth de viation less than 4%. The measured l dB compression points are -3.0dBm and -5.1 dBm respectively for different modes. The core circuit of LPF consumes l mW and 1.6mW for WCDMA and GPS/Galileo respectively. And the proposed LPF occupies an area of 0.78ram2.展开更多
基金Supported by Guangdong Provincial Science and Technology Project(2007B080401018)~~
文摘Over the past decade,national standard and industry standard of bio-fertilizer have been gradually established in China. Moreover,the microbial fertilizer standard system with Chinese characteristics has been firstly established by China in the world. Development of bio-fertilizer standard,especially the amplification and modification of bio-fertilizer product standard and the construction of bio-fertilizer standard system,etc. were summarized in this paper. Meanwhile,relative suggestions of existing problems were put forward.
文摘Satellite communication networks have been evolving from standalone networks with ad-hoc infrastructures to possibly interconnected portions of a wider Future Internet architecture. Experts belonging to the fifth-generation(5 G) standardization committees are considering satellites as a technology to integrate in the 5 G environment. Software Defined Networking(SDN) is one of the paradigms of the next generation of mobile and fixed communications. It can be employed to perform different control functionalities, such as routing, because it allows traffic flow identification based on different parameters and traffic flow management in a centralized way. A centralized set of controllers makes the decisions and sends the corresponding forwarding rules for each traffic flow to the involved intermediate nodes that practically forward data up to the destination. The time to perform this process in integrated terrestrial-satellite networks could be not negligible due to satellite link delays. The aim of this paper is to introduce an SDN-based terrestrial satellite network architecture and to estimate the mean time to deliver the data of a new traffic flow from the source to the destination including the time required to transfer SDN control actions. The practical effect is to identify the maximum performance than can be expected.
文摘As BIM （building information modeling） became the gold standard of the architecture, construction, and engineering industry, lack of skilled BIM professionals is considered one of the major challenges. It is therefore of significant importance that CM （construction management） programs train future construction professionals in the capabilities and advantages of BIM technology. This paper presents the findings of a comprehensive review of the implementation of BIM education in CM programs and summarizes the process of BIM adoption, existing educational approaches, and identified challenges in the implementation process. The information presented in this paper serves as a guide to CM programs that are new to and in the progress of implementing BIM education.
基金Supported by the National Basic Research Program of China(No.2010CB327404)the Priority Academic Program Development of Jiangsu Higher Education Institutions
文摘A 4th-order low-pass filter （LPF） based on active-Gm-RC structure for multi-standard system application is presented in this paper. The performances of LPF are controlled by a 1-bit control- voltage, and the cut-off frequency, channel selectivity, and linearity of the proposed filter can be reconfigured accordingly. In order to improve the accuracy of the cut-off frequency, a binary-weigh- ted switched-capacitor array is employed as the auto-tuning circuits to calibrate the RC-time con- stant. Fabricated in TSMC 0. 18μm RF CMOS process, the proposed LPF achieves a measured cutoff frequency of 1.95 and 12.3MHz for WCDMA and GPS/Galileo application with a bandwidth de viation less than 4%. The measured l dB compression points are -3.0dBm and -5.1 dBm respectively for different modes. The core circuit of LPF consumes l mW and 1.6mW for WCDMA and GPS/Galileo respectively. And the proposed LPF occupies an area of 0.78ram2.
