The shear behavior of rock joints is important in solving practical problems of rock mechanics. Three group rock joints with different morphologies are made by cement mortar material and a series of CNL(constant norma...The shear behavior of rock joints is important in solving practical problems of rock mechanics. Three group rock joints with different morphologies are made by cement mortar material and a series of CNL(constant normal loading) shear tests are performed. The influences of the applied normal stress and joint morphology to its shear strength are analyzed. According to the experimental results, the peak dilatancy angle of rock joint decreases with increasing normal stress, but increases with increasing roughness. The shear strength increases with the increasing normal stress and the roughness of rock joint. It is observed that the modes of failure of asperities are tensile, pure shear, or a combination of both. It is suggested that the three-dimensional roughness parameters and the tensile strength are the appropriate parameter for describing the shear strength criterion. A new peak shear criterion is proposed which can be used to predict peak shear strength of rock joints. All the used parameters can be easily obtained by performing tests.展开更多
This paper investigates the relative 1-canonical images of non-hyperelliptic fibrations of genus 4. It is proved that if a fibre of the relative 1-canonical image ∑ is not a complete intersection in 3 , then the var...This paper investigates the relative 1-canonical images of non-hyperelliptic fibrations of genus 4. It is proved that if a fibre of the relative 1-canonical image ∑ is not a complete intersection in 3 , then the variety ∑ cannot be smooth on this fibre. Moreover, two examples are given to show the occurrence of such cases.展开更多
基金Project(41130742)supported by the Key Program of National Natural Science Foundation of ChinaProject(2014CB046904)supportedby the National Basic Research Program of China+1 种基金Project(2011CDA119)supported by Natural Science Foundation of Hubei Province,ChinaProject(40972178)supported by the General Program of National Natural Science Foundation of China
文摘The shear behavior of rock joints is important in solving practical problems of rock mechanics. Three group rock joints with different morphologies are made by cement mortar material and a series of CNL(constant normal loading) shear tests are performed. The influences of the applied normal stress and joint morphology to its shear strength are analyzed. According to the experimental results, the peak dilatancy angle of rock joint decreases with increasing normal stress, but increases with increasing roughness. The shear strength increases with the increasing normal stress and the roughness of rock joint. It is observed that the modes of failure of asperities are tensile, pure shear, or a combination of both. It is suggested that the three-dimensional roughness parameters and the tensile strength are the appropriate parameter for describing the shear strength criterion. A new peak shear criterion is proposed which can be used to predict peak shear strength of rock joints. All the used parameters can be easily obtained by performing tests.
基金the National Natural Science Foundation of China (10371036)the Natural Science Foundation of Beijing (1042001)the Fundamental Research Foundation of Beijing University of Technology (KZ0601200382)
文摘This paper deals with Δ-good filtration dimensions of a standardly stratified algebra and Δ[x]-good titration dimensions of its polynomial algebra.
文摘This paper investigates the relative 1-canonical images of non-hyperelliptic fibrations of genus 4. It is proved that if a fibre of the relative 1-canonical image ∑ is not a complete intersection in 3 , then the variety ∑ cannot be smooth on this fibre. Moreover, two examples are given to show the occurrence of such cases.
