In an actual control system, it is often difficult to find out where the faults are if only based on the outside fault phenomena, acquired frequently from a fault system. So the fault diagnosis by outside fault phenom...In an actual control system, it is often difficult to find out where the faults are if only based on the outside fault phenomena, acquired frequently from a fault system. So the fault diagnosis by outside fault phenomena is considered. Based on the theory of fuzzy recognition and fault diagnosis, this method only depends on experience and statistical data to set up fuzzy query relationship between the outside phenomena (fault characters) and the fault sources (fault patterns). From this relationship the most probable fault sources can be obtained, to attain the goal of quick diagnosis. Based on the above approach, the standard fuzzy relationship matrix is stored in the computer as a system database. And experiment data are given to show the fault diagnosis results. The important parameters can be on line sampled and analyzed, and when faults occur, faults can be found, the alarm is given and the controller output is regulated.展开更多
Some ideas in the development of fault diagnosis system for spacecraft are introduced. Firstly, the architecture of spacecraft fault diagnosis is proposed hierarchically with four diagnosis frames, i.e., system level,...Some ideas in the development of fault diagnosis system for spacecraft are introduced. Firstly, the architecture of spacecraft fault diagnosis is proposed hierarchically with four diagnosis frames, i.e., system level, subsystem level, component level and element level. Secondly, a hierarchical diagnosis model is expressed with four layers, i.e., sensors layer, function layer, behavior layer and structure layer. These layers are used to work together to accomplish the fault alarm, diagnosis and localization. Thirdly, a fault-tree-oriented hybrid knowledge representation based on frame and generalized rule and its relevant reasoning strategy is put forward. Finally, a diagnosis case for spacecraft power system is exemplified combining the above with a powerful expert system development tool G2.展开更多
Risk analysis of key systems have become a growing topic late of because of the development of offshore structures. Equipment failures of offioading system and fire accidents were analyzed based on the floating produc...Risk analysis of key systems have become a growing topic late of because of the development of offshore structures. Equipment failures of offioading system and fire accidents were analyzed based on the floating production, storage and offioading （FPSO） features. Fault tree analysis （FTA）, and failure modes and effects analysis （FMEA） methods were examined based on information already researched on modules of relex reliability studio （RRS）. Equipment failures were also analyzed qualitatively by establishing a fault tree and Boolean structure function based on the shortage of failure cases, statistical data, and risk control measures examined. Failure modes of fire accident were classified according to the different areas of fire occurrences during the FMEA process, using risk priority number （RPN） methods to evaluate their severity rank. The qualitative analysis of FTA gave the basic insight of forming the failure modes of FPSO offioading, and the fire FMEA gave the priorities and suggested processes. The research has practical importance for the security analysis problems of FPSO.展开更多
The lathes are basic machine tools for manufacturing cylindrical parts. In recent years, the DLseries computer numerical control(CNC) heavy-duty horizontal lathes(HDHLs) have been widely used in the transportation, en...The lathes are basic machine tools for manufacturing cylindrical parts. In recent years, the DLseries computer numerical control(CNC) heavy-duty horizontal lathes(HDHLs) have been widely used in the transportation, energy and aviation industries. High availability of the CNC heavy-duty lathes is demanded to guarantee the efficiency and benefit of these manufacturing industries. As one of the key subsystems of the HDHLs, the feeding control system is studied in this paper on reliability modeling and reliability analysis. The fault tree analysis(FTA) method is used for reliability modelling of the feeding control system. Considering the multiple common cause failure groups(CCFGs) existing in the system, a modified beta factor parametric model is introduced to model the common cause failure(CCF) in system. The reliability of feeding control system is then obtained and the effect of CCF on the reliability of the whole system is studied as well.展开更多
文摘In an actual control system, it is often difficult to find out where the faults are if only based on the outside fault phenomena, acquired frequently from a fault system. So the fault diagnosis by outside fault phenomena is considered. Based on the theory of fuzzy recognition and fault diagnosis, this method only depends on experience and statistical data to set up fuzzy query relationship between the outside phenomena (fault characters) and the fault sources (fault patterns). From this relationship the most probable fault sources can be obtained, to attain the goal of quick diagnosis. Based on the above approach, the standard fuzzy relationship matrix is stored in the computer as a system database. And experiment data are given to show the fault diagnosis results. The important parameters can be on line sampled and analyzed, and when faults occur, faults can be found, the alarm is given and the controller output is regulated.
文摘Some ideas in the development of fault diagnosis system for spacecraft are introduced. Firstly, the architecture of spacecraft fault diagnosis is proposed hierarchically with four diagnosis frames, i.e., system level, subsystem level, component level and element level. Secondly, a hierarchical diagnosis model is expressed with four layers, i.e., sensors layer, function layer, behavior layer and structure layer. These layers are used to work together to accomplish the fault alarm, diagnosis and localization. Thirdly, a fault-tree-oriented hybrid knowledge representation based on frame and generalized rule and its relevant reasoning strategy is put forward. Finally, a diagnosis case for spacecraft power system is exemplified combining the above with a powerful expert system development tool G2.
基金Supported by the Fundamental Research Funds for the Central Universities (HEUCFR1109)"111" projects foundation (Grant No.B07019) from State Administration of Foreign Experts Affairs of China and Ministry of Education of China
文摘Risk analysis of key systems have become a growing topic late of because of the development of offshore structures. Equipment failures of offioading system and fire accidents were analyzed based on the floating production, storage and offioading （FPSO） features. Fault tree analysis （FTA）, and failure modes and effects analysis （FMEA） methods were examined based on information already researched on modules of relex reliability studio （RRS）. Equipment failures were also analyzed qualitatively by establishing a fault tree and Boolean structure function based on the shortage of failure cases, statistical data, and risk control measures examined. Failure modes of fire accident were classified according to the different areas of fire occurrences during the FMEA process, using risk priority number （RPN） methods to evaluate their severity rank. The qualitative analysis of FTA gave the basic insight of forming the failure modes of FPSO offioading, and the fire FMEA gave the priorities and suggested processes. The research has practical importance for the security analysis problems of FPSO.
基金the National Science and Technology Major Project of China(No.2014ZX04014-011)
文摘The lathes are basic machine tools for manufacturing cylindrical parts. In recent years, the DLseries computer numerical control(CNC) heavy-duty horizontal lathes(HDHLs) have been widely used in the transportation, energy and aviation industries. High availability of the CNC heavy-duty lathes is demanded to guarantee the efficiency and benefit of these manufacturing industries. As one of the key subsystems of the HDHLs, the feeding control system is studied in this paper on reliability modeling and reliability analysis. The fault tree analysis(FTA) method is used for reliability modelling of the feeding control system. Considering the multiple common cause failure groups(CCFGs) existing in the system, a modified beta factor parametric model is introduced to model the common cause failure(CCF) in system. The reliability of feeding control system is then obtained and the effect of CCF on the reliability of the whole system is studied as well.
