Based on LabVlEW platform, a distributed dynamic storage testing system is designed for measuring transient high temperature signals of explosion field. Using a highpower semiconductor laser as heat source, a traceabl...Based on LabVlEW platform, a distributed dynamic storage testing system is designed for measuring transient high temperature signals of explosion field. Using a highpower semiconductor laser as heat source, a traceable dynamic calibration system is established to perform dynamic calibration of thermocouples. With quantumbehaved particle swam optimization （QP-SO） algorithm on MATLAB platform, a model of dynamic compensation filter is established. It is used by LabVIEW that calls MATLAB Script nodes or COM components to accomplish the mixed programming of LabVIEW and MATLAB, further to compensate the temperature values of the thermocouples dynamically. The experimental results show that the technique that combines temperature measurement system with LabVIEW platform is applied well in testing the explosion temperature of ther mobaric weaponry and makes the compensation values closer to the actual signals.展开更多
The ESA Sentinel-2 mission developed by European Aeronautic Defense and Space Compagny （EADS） Astrium will be devoted to Earth high resolution spectral imagery for the purpose of a global environmental monitoring. A...The ESA Sentinel-2 mission developed by European Aeronautic Defense and Space Compagny （EADS） Astrium will be devoted to Earth high resolution spectral imagery for the purpose of a global environmental monitoring. As a subcontractor of EADS Astrium, AMOS was responsible for the manufacturing of the instrument telescope mirrors and for the validation of the telescope alignment procedure. This paper details the mirror manufacturing sequences from mirror CVD-SiC cladding to surface figuring and coating, outlining the metrology steps and their corresponding accuracy budget. The telescope alignment process is described in connection with the tooling and techniques that helped achieve the required optical performance of less than 90 nm RMS wavefront error within the telescope field of view.Pierre Gloesenet展开更多
This paper studies the technics of reducing item exposure by utilizing automatic item generation methods. Known test item calibration method uses item parameter estimation with the statistical data, collected during e...This paper studies the technics of reducing item exposure by utilizing automatic item generation methods. Known test item calibration method uses item parameter estimation with the statistical data, collected during examinees prior testing. Disadvantage of the mentioned item calibration method is the item exposure; when test items become familiar to the examinees. To reduce the item exposure, automatic item generation method is used, where item models are being constructed based on already calibrated test items without losing already estimated item parameters. A technic of item model extraction method from the already calibrated and therefore exposed test items described, which can be used by the test item development specialists to integrate automatic item generation principles with the existing testing applications.展开更多
Calibration coefficients validation is the foundation for ascertaining the sensor performance and carrying out the quantitative application.Based on the analysis of the differences between the calibration and validati...Calibration coefficients validation is the foundation for ascertaining the sensor performance and carrying out the quantitative application.Based on the analysis of the differences between the calibration and validation,two calibration coefficients validation methods were introduced in this paper.Taking the HJ-1A satellite CCD1 camera as an example,the uncertainties of calibration coefficients validation were analyzed.The calibration coefficients validation errors were simulated based on the measured data at an Inner Mongolia test site.The result showed that in the large view angle,the ground directional reflectance variation and the atmospheric path variation were the main error sources in calibration coefficients validation.The ground directional reflectance correction and atmospheric observation angle normalization should be carried out to improve the validation accuracy of calibration coefficients.展开更多
基金The 11th Postgraduate Technology Innovation Project of North University of China(No.20141147)
文摘Based on LabVlEW platform, a distributed dynamic storage testing system is designed for measuring transient high temperature signals of explosion field. Using a highpower semiconductor laser as heat source, a traceable dynamic calibration system is established to perform dynamic calibration of thermocouples. With quantumbehaved particle swam optimization （QP-SO） algorithm on MATLAB platform, a model of dynamic compensation filter is established. It is used by LabVIEW that calls MATLAB Script nodes or COM components to accomplish the mixed programming of LabVIEW and MATLAB, further to compensate the temperature values of the thermocouples dynamically. The experimental results show that the technique that combines temperature measurement system with LabVIEW platform is applied well in testing the explosion temperature of ther mobaric weaponry and makes the compensation values closer to the actual signals.
文摘The ESA Sentinel-2 mission developed by European Aeronautic Defense and Space Compagny （EADS） Astrium will be devoted to Earth high resolution spectral imagery for the purpose of a global environmental monitoring. As a subcontractor of EADS Astrium, AMOS was responsible for the manufacturing of the instrument telescope mirrors and for the validation of the telescope alignment procedure. This paper details the mirror manufacturing sequences from mirror CVD-SiC cladding to surface figuring and coating, outlining the metrology steps and their corresponding accuracy budget. The telescope alignment process is described in connection with the tooling and techniques that helped achieve the required optical performance of less than 90 nm RMS wavefront error within the telescope field of view.Pierre Gloesenet
文摘This paper studies the technics of reducing item exposure by utilizing automatic item generation methods. Known test item calibration method uses item parameter estimation with the statistical data, collected during examinees prior testing. Disadvantage of the mentioned item calibration method is the item exposure; when test items become familiar to the examinees. To reduce the item exposure, automatic item generation method is used, where item models are being constructed based on already calibrated test items without losing already estimated item parameters. A technic of item model extraction method from the already calibrated and therefore exposed test items described, which can be used by the test item development specialists to integrate automatic item generation principles with the existing testing applications.
基金supported by the International Science and Technology Cooperation Program of China(Grant No.2008DFA21540)the National Hi-Tech Research and Development Program of China(Grant No.2006AA12Z113)+1 种基金the Chinese Defense Advance Research Program of Science and Technologythe Young Talents Filed Special Project of Institute of Remote Sensing and Application of Chinese Academy of Sciences
文摘Calibration coefficients validation is the foundation for ascertaining the sensor performance and carrying out the quantitative application.Based on the analysis of the differences between the calibration and validation,two calibration coefficients validation methods were introduced in this paper.Taking the HJ-1A satellite CCD1 camera as an example,the uncertainties of calibration coefficients validation were analyzed.The calibration coefficients validation errors were simulated based on the measured data at an Inner Mongolia test site.The result showed that in the large view angle,the ground directional reflectance variation and the atmospheric path variation were the main error sources in calibration coefficients validation.The ground directional reflectance correction and atmospheric observation angle normalization should be carried out to improve the validation accuracy of calibration coefficients.
