The Reproducing Kernel Particle Method (RKPM) is one of several new meshless numerical methods de- veloped internationally in recent years. The ideal elasto-plastic constitutive model of material under a Taylor impact...The Reproducing Kernel Particle Method (RKPM) is one of several new meshless numerical methods de- veloped internationally in recent years. The ideal elasto-plastic constitutive model of material under a Taylor impact is characterized by the Jaumann stress- and strain-rates. An updated Lagrangian format is used for the calculation in a nu- merical analysis. With the RKPM, this paper deals with the calculation model for the Taylor impact and deduces the control equation for the impact process. A program was developed to simulate numerically the Taylor impact of projec- tiles composed of several kinds of material. The simulation result is in good accordance with both the test results and the Taylor analysis outcome. Since the meshless method is not limited by meshes, it is believed to be widely applicable to such complicated processes as the Taylor impact, including large deformation and strain and to the study of the dy- namic qualities of materials.展开更多
It is a challenge to verify integrity of dynamic control flows due to their dynamic and volatile nature. To meet the challenge, existing solutions usually implant an ＂attachment＂ in each control transfer. However, t...It is a challenge to verify integrity of dynamic control flows due to their dynamic and volatile nature. To meet the challenge, existing solutions usually implant an ＂attachment＂ in each control transfer. However, the attachment introduces additional cost except performance penalty. For example, the attachment must be unique or restrictedly modified. In this paper, we propose a novel approach to detect integrity of dynamic control flows by counting executed branch instructions without involving any attachment. Our solution is based on the following observation. If a control flow is compromised, the number of executed branch instructions will be abnormally increased. The cause is that intruders usually hijack control flows for malicious execution which absolutely introduces additional branch instructions. Inspired by the above observation, in this paper, we devise a novel system named DCFI- Checker, which detect integrity corruption of dynamic control flows with the support of Performance Monitoring Counter （PMC）. We have developed a proof-of-concept prototype system of DCFI-Checker on Linux fedora 5. Our experiments with existing kemel rootkits and buffer overflow attack show that DCFI- Checker is effective to detect compromised dynamic control transfer, and performance evaluations indicate that performance penaltyinduced by DCFI-Checker is acceptable.展开更多
Based on the statistics of surface drifter data of 1979-2011 and the simulation of nuclear pollutant particulate move- merits simulated using high quality ocean reanalysis surface current dataset, the transport pathwa...Based on the statistics of surface drifter data of 1979-2011 and the simulation of nuclear pollutant particulate move- merits simulated using high quality ocean reanalysis surface current dataset, the transport pathways and impact strength of Fuku-shima nuclear pollutants in the North Pacific have been estimated. The particulates are used to increase the sampling size and en- hance the representativeness of statistical results. The trajectories of the drifters and particulates are first examined to identify typical drifting pathways. The results show that there are three types of transport paths for nuclear pollutants at the surface： 1） most pollutant particles move eastward and are carried by the Kuroshio and Kuroshio-extension currents and reach the east side of the North Pacific after about 3.2-3.9 years; 2） some particles travel with the subtropical circulation branch and reach the east coast of China after about 1.6 years according to one drifter trajectory and about 3.6 years according to particulate trajectories; 3） a little of them travel with local, small scale circulations and reach the east coast of China after about 1.3-1.8 years. Based on the par-tieulates, the impact strength of nuclear pollutants at these time scales can be estimated according to the temporal variations of relative concentration combined with the radioactive decay rate. For example, Cesium-137, carried by the strong North Pacific current, mainly accumulates in the eastern North Pacific and its impact strength is 4% of the initial level at the originating Fuku- shima area after 4 years. Due to local eddies, Cesium-137 in the western North Pacific is 1% of the initial pollutant level after 1.5 years and continuously increases to 3% after 4 years. The vertical movement of radioactive pollutants is not taken into account in the present study, and the estimation accuracy would be improved by considering three-dimensional flows.展开更多
Based on the statistics of all surface drifting buoys of 1978-2011 and Lagrangian tracers simulated from high quality ocean reanalysis currents,the impact times and strength of Fukushima nuclear pollution to the east ...Based on the statistics of all surface drifting buoys of 1978-2011 and Lagrangian tracers simulated from high quality ocean reanalysis currents,the impact times and strength of Fukushima nuclear pollution to the east coast of China and the west coast of America have been estimated.Under the circumstances of the radioactive pollutants drifting in the ocean surface,preliminary research results show that while the tracers took about 4 years to reach the west coast of USA,there are two types of tracers to carry out Fukushima nuclear pollutants to reach the east coast of China,corresponding to 1.5-year recirculation gyre transport and 3.5-year subtropical circulation transport.The distributions of the impact strength at these time scales are given according to the variation of relative number concentration with time combined with the decaying rate of radioactive matter.For example,starting from 1% at 1.5-year,of the initial level at the originating area of Fukushima nuclear pollution,the impact strength of Cesium-137 in the South China Sea continuously increases up to 3% by 4 years,while the impact strength of Cesium-137 in the west coast of America is as high as 4% due to the role of strong Kuroshio-extension currents as a major transport mechanism of nuclear pollutants for that area.展开更多
Objective: To investigate the role and clinical value of radionuclide imaging in hepatic impact injuries in rabbits. Methods: Rabbits were experimentally impacted on the liver with BIM IV bio impact machine. Liver ima...Objective: To investigate the role and clinical value of radionuclide imaging in hepatic impact injuries in rabbits. Methods: Rabbits were experimentally impacted on the liver with BIM IV bio impact machine. Liver imaging was performed with 99m Tc labeled sodium phytate. Liver blood pool imaging was performed with 99m Tc stannous pyrophosphate labeled red blood cells. The results of radionuclide imaging were compared with the anatomic results. Results: There was significant difference between the images of the injured liver and the control. Radio diminution and defect were shown in the injured liver areas. Various sorts of abnormal radioactivity distribution were observed with hepatic blood pool imaging. The results of the liver imaging and liver blood pool imaging were accorded with the results of the anatomic findings. Conclusions: Radionuclide imaging may well display the changes of hepatocellular structures and functions after injury, which is valuable in locating the concrete injured position and differentiating the injured degrees of liver.展开更多
文摘本文将Quahand Vahey (1995)的SVAR拓展为三变量模型,并以垂直的菲利普斯曲线为理论基础,施加三个长期约束条件,以识别三变量SVAR模型。从缩减式VAR的估计残差中还原出结构冲击,从脉冲响应函数中还原出结构冲击对各变量的影响。依据Quah and Vahey的核心通货膨胀定义从受限制的SVAR模型中估计出我国的核心通货膨胀率。从估计效果来看,首先是能够完全反应我国通货膨胀演化的历史过程;其次是具有较高的预测未来通货膨胀变动的能力。因此对于货币当局的决策具有一定的指导意义。
基金Project /s50674002 supported by the National Natural Science Foundation of China
文摘The Reproducing Kernel Particle Method (RKPM) is one of several new meshless numerical methods de- veloped internationally in recent years. The ideal elasto-plastic constitutive model of material under a Taylor impact is characterized by the Jaumann stress- and strain-rates. An updated Lagrangian format is used for the calculation in a nu- merical analysis. With the RKPM, this paper deals with the calculation model for the Taylor impact and deduces the control equation for the impact process. A program was developed to simulate numerically the Taylor impact of projec- tiles composed of several kinds of material. The simulation result is in good accordance with both the test results and the Taylor analysis outcome. Since the meshless method is not limited by meshes, it is believed to be widely applicable to such complicated processes as the Taylor impact, including large deformation and strain and to the study of the dy- namic qualities of materials.
基金The work is supported in part by the National Natural Science Foundation of China，Natural Science Foundation of Beijing，National 863 High-Tech Research Development Program of China
文摘It is a challenge to verify integrity of dynamic control flows due to their dynamic and volatile nature. To meet the challenge, existing solutions usually implant an ＂attachment＂ in each control transfer. However, the attachment introduces additional cost except performance penalty. For example, the attachment must be unique or restrictedly modified. In this paper, we propose a novel approach to detect integrity of dynamic control flows by counting executed branch instructions without involving any attachment. Our solution is based on the following observation. If a control flow is compromised, the number of executed branch instructions will be abnormally increased. The cause is that intruders usually hijack control flows for malicious execution which absolutely introduces additional branch instructions. Inspired by the above observation, in this paper, we devise a novel system named DCFI- Checker, which detect integrity corruption of dynamic control flows with the support of Performance Monitoring Counter （PMC）. We have developed a proof-of-concept prototype system of DCFI-Checker on Linux fedora 5. Our experiments with existing kemel rootkits and buffer overflow attack show that DCFI- Checker is effective to detect compromised dynamic control transfer, and performance evaluations indicate that performance penaltyinduced by DCFI-Checker is acceptable.
基金supported by the National Basic Research Program (Grant No.2013CB430304)the National Natural Science Foundation of China (Nos.41206178, 41030854, 41106005, 41176003 and 41306006)the National High-Tech R&D Program of China (No.2013 AA09A505)
文摘Based on the statistics of surface drifter data of 1979-2011 and the simulation of nuclear pollutant particulate move- merits simulated using high quality ocean reanalysis surface current dataset, the transport pathways and impact strength of Fuku-shima nuclear pollutants in the North Pacific have been estimated. The particulates are used to increase the sampling size and en- hance the representativeness of statistical results. The trajectories of the drifters and particulates are first examined to identify typical drifting pathways. The results show that there are three types of transport paths for nuclear pollutants at the surface： 1） most pollutant particles move eastward and are carried by the Kuroshio and Kuroshio-extension currents and reach the east side of the North Pacific after about 3.2-3.9 years; 2） some particles travel with the subtropical circulation branch and reach the east coast of China after about 1.6 years according to one drifter trajectory and about 3.6 years according to particulate trajectories; 3） a little of them travel with local, small scale circulations and reach the east coast of China after about 1.3-1.8 years. Based on the par-tieulates, the impact strength of nuclear pollutants at these time scales can be estimated according to the temporal variations of relative concentration combined with the radioactive decay rate. For example, Cesium-137, carried by the strong North Pacific current, mainly accumulates in the eastern North Pacific and its impact strength is 4% of the initial level at the originating Fuku- shima area after 4 years. Due to local eddies, Cesium-137 in the western North Pacific is 1% of the initial pollutant level after 1.5 years and continuously increases to 3% after 4 years. The vertical movement of radioactive pollutants is not taken into account in the present study, and the estimation accuracy would be improved by considering three-dimensional flows.
基金supported by National Natural Science Foundation of China(Grant Nos. 41030854,40906015,40906016,41106005,and 41176003)
文摘Based on the statistics of all surface drifting buoys of 1978-2011 and Lagrangian tracers simulated from high quality ocean reanalysis currents,the impact times and strength of Fukushima nuclear pollution to the east coast of China and the west coast of America have been estimated.Under the circumstances of the radioactive pollutants drifting in the ocean surface,preliminary research results show that while the tracers took about 4 years to reach the west coast of USA,there are two types of tracers to carry out Fukushima nuclear pollutants to reach the east coast of China,corresponding to 1.5-year recirculation gyre transport and 3.5-year subtropical circulation transport.The distributions of the impact strength at these time scales are given according to the variation of relative number concentration with time combined with the decaying rate of radioactive matter.For example,starting from 1% at 1.5-year,of the initial level at the originating area of Fukushima nuclear pollution,the impact strength of Cesium-137 in the South China Sea continuously increases up to 3% by 4 years,while the impact strength of Cesium-137 in the west coast of America is as high as 4% due to the role of strong Kuroshio-extension currents as a major transport mechanism of nuclear pollutants for that area.
文摘Objective: To investigate the role and clinical value of radionuclide imaging in hepatic impact injuries in rabbits. Methods: Rabbits were experimentally impacted on the liver with BIM IV bio impact machine. Liver imaging was performed with 99m Tc labeled sodium phytate. Liver blood pool imaging was performed with 99m Tc stannous pyrophosphate labeled red blood cells. The results of radionuclide imaging were compared with the anatomic results. Results: There was significant difference between the images of the injured liver and the control. Radio diminution and defect were shown in the injured liver areas. Various sorts of abnormal radioactivity distribution were observed with hepatic blood pool imaging. The results of the liver imaging and liver blood pool imaging were accorded with the results of the anatomic findings. Conclusions: Radionuclide imaging may well display the changes of hepatocellular structures and functions after injury, which is valuable in locating the concrete injured position and differentiating the injured degrees of liver.
