When water seeps upwards through a saturated soil layer,the soil layer may become instability and water films occur and develop.Water film serves as a natural sliding surface because of its very small friction.Accordi...When water seeps upwards through a saturated soil layer,the soil layer may become instability and water films occur and develop.Water film serves as a natural sliding surface because of its very small friction.Accordingly,debris flow may happen.To investigate this phenomenon,a pseudothree-phase media is presented first.Then discontinuity method is used to analyze the expansion velocity of water film.Finally,perturbation method is used to analyze the case that a water flow is forced to seep upwards through the soil layer while the movement of the skeleton may be neglected relative to that of water.The theoretical evolutions of pore pressure gradient,effective stress,water velocity,the porosity and the eroded fine grains are obtained.It can be seen clearly that with the erosion and redeposited of fine grains,permeability at some positions in the soil layer becomes smaller and smaller and,the pore pressure gradient becomes bigger and bigger,while the effective stress becomes smaller and smaller.When the effective stress equals zero,e.f.liquefaction,the water film occurs.It is shown also that once a water film occurs,it will be expanded in a speed of U(t)(1-ε).展开更多
It is an important guarantee to enhance the production of coalbed methane （CBM） and reduce the project invest- ment by finding out the drainage feature about CBM wells in different hydrogeological conditions. Based ...It is an important guarantee to enhance the production of coalbed methane （CBM） and reduce the project invest- ment by finding out the drainage feature about CBM wells in different hydrogeological conditions. Based on the CBM explora- tion and development data on the Fanzhuang block in southeast Qinshui Basin and combined with the seepage principle and lithology on the roof and the bottom coalbed, the mathematical model of integrated permeability was established. By perme- ability experiments of the different lithologies on the roof and the floor within the 20 m range combined with the log curves, the integrated permeability of different lithological combinations were obtained. The starting pressure gradient and permeabi- lity of the roof and the floor for different lithologies was tested by ＂differential pressure-flow method＂. The relationships be- tween the starting pressure gradient and the integrated permeability were obtained. The critical distance of limestone water penetrating into coal reservoirs was calculated. According to the drainage feature of CBM wells combined with the drainage data of some CBM wells, the results show that, when limestone water can penetrate into coal reservoirs, the daily water production is high and the daily gas production is low although there is no gas at the beginning of the drainage process, the CBM wells stop discharging water within 6 months after the gas began to come out, and the gas production is steadily improved. When limestone water can not penetrate into coal reservoirs, the daily water production is low and the daily gas production is high at the beginning of the drainage process, and it almost stops discharging water after some time when the gas come out, the daily gas production increases, and the cumulative water production is much lower.展开更多
Air leakage may significantly affect the effectiveness of mine ventilation by in- creasing the cost of ventilation and arousing problems for ventilation management.Fur- thermore,air leakage may accelerate the process ...Air leakage may significantly affect the effectiveness of mine ventilation by in- creasing the cost of ventilation and arousing problems for ventilation management.Fur- thermore,air leakage may accelerate the process of coal spontaneous combustion and cause gas explosion,thus greatly threatens the safety of coal production.The estimation of air leakage,therefore,have great practical significance.For any ventilation system of coal mines,there is a defined pattern of pressure gradient which drived the mine air to flow in the network,drives possible air leakage to go shortcut as well.Air leakage may occur through ventilation structures such as ventilation doors and fractures of the surroun- dig coal and rock of airways.A concept and the relevent calculation method of the pres- sure gradient matrix was put forward to assist the analysis of potential air leakage routes. A simplified example was used to introduce the application principle of'pressure gradient matrix in identifying all the potential air leaking routes,which offers a deeper understand- ing over the ventilation system and the prevention of coal spontaneous combustion.展开更多
TiC, ZrC and TaC modified layers were in-situ prepared on graphite matrix by chemical vapor infiltration method with metal salts as the activator. Taking the TiC modified layer as an example, through thermodynamic cal...TiC, ZrC and TaC modified layers were in-situ prepared on graphite matrix by chemical vapor infiltration method with metal salts as the activator. Taking the TiC modified layer as an example, through thermodynamic calculation and experiment, the thermal decomposition process of raw materials(Ti/K_(2)TiF_(6)) was analyzed, the formation mechanism of TiC was determined, and the distribution of TiC modified layer was modulated. The results show that activator K_(2)TiF_(6)has higher decomposition temperature than NH4Cl, which is conducive to improving the utilization rate of raw materials in the gas infiltration process. Increasing the content of Ti powder can increase the concentration of reaction gas and contribute to the formation of TiC modified layer. When the molar ratio of Ti to K_(2)TiF_(6)is 3:1, the surface thickness and infiltration depth of Ti C are 5.42 and 136.24 μm, respectively. Increasing the reaction temperature can improve the rate of in-situ reaction and the thickness of TiC surface layer. When the experimental temperature rises to 1600 °C, the TiC surface layer thickness increases to 20.27 μm.展开更多
In low permeability porous media which permeability anisotropy is ubiquitous,the percolation of fluid no longer follows linear Darcy’s Law.Oil-water two phase flow equation of low permeability reservoir with permeabi...In low permeability porous media which permeability anisotropy is ubiquitous,the percolation of fluid no longer follows linear Darcy’s Law.Oil-water two phase flow equation of low permeability reservoir with permeability anisotropy is established based on generalized Darcy’s law and starting pressure gradient,corresponding finite element program is developed and simulated based on the Finite Element Program Generator system (FEPG).The results show that energy-gathering exists in the flow event of flowing area front in low permeability reservoir.In the process of energy-gathering,the flow velocity changed little but increased rapidly as soon as the pressure gradient exceeded the starting pressure gradient of the reservoir,then gradually stabilized.The greater the starting pressure gradient is,the greater the near wellbore pressure drop is,the smaller the area influenced by the reservoir pressure changes caused by water injection and oil recovery.The greater the starting pressure gradient is,the lower the water saturation in same point of the reservoir is,the smaller the water flood swept area is.There will be more difficulties in water injection to the same extent.展开更多
基金supported by the National Basic Research Program of China (973 program) "Activity characteristics and formation rules of secondary mountain hazard of earthquake" (Grant No.2008CB425802)Key Program of Chinese Academy of Sciences (No.KZCX2-YW-302-02)
文摘When water seeps upwards through a saturated soil layer,the soil layer may become instability and water films occur and develop.Water film serves as a natural sliding surface because of its very small friction.Accordingly,debris flow may happen.To investigate this phenomenon,a pseudothree-phase media is presented first.Then discontinuity method is used to analyze the expansion velocity of water film.Finally,perturbation method is used to analyze the case that a water flow is forced to seep upwards through the soil layer while the movement of the skeleton may be neglected relative to that of water.The theoretical evolutions of pore pressure gradient,effective stress,water velocity,the porosity and the eroded fine grains are obtained.It can be seen clearly that with the erosion and redeposited of fine grains,permeability at some positions in the soil layer becomes smaller and smaller and,the pore pressure gradient becomes bigger and bigger,while the effective stress becomes smaller and smaller.When the effective stress equals zero,e.f.liquefaction,the water film occurs.It is shown also that once a water film occurs,it will be expanded in a speed of U(t)(1-ε).
基金Supported by the Major Projects of National Science and Technology Project ＂Development of Coal-bed Gas Dynamic Evaluation Model and Software System＂ （2011ZX05034-005） the National Natural Science Foundation of China （40902044）
文摘It is an important guarantee to enhance the production of coalbed methane （CBM） and reduce the project invest- ment by finding out the drainage feature about CBM wells in different hydrogeological conditions. Based on the CBM explora- tion and development data on the Fanzhuang block in southeast Qinshui Basin and combined with the seepage principle and lithology on the roof and the bottom coalbed, the mathematical model of integrated permeability was established. By perme- ability experiments of the different lithologies on the roof and the floor within the 20 m range combined with the log curves, the integrated permeability of different lithological combinations were obtained. The starting pressure gradient and permeabi- lity of the roof and the floor for different lithologies was tested by ＂differential pressure-flow method＂. The relationships be- tween the starting pressure gradient and the integrated permeability were obtained. The critical distance of limestone water penetrating into coal reservoirs was calculated. According to the drainage feature of CBM wells combined with the drainage data of some CBM wells, the results show that, when limestone water can penetrate into coal reservoirs, the daily water production is high and the daily gas production is low although there is no gas at the beginning of the drainage process, the CBM wells stop discharging water within 6 months after the gas began to come out, and the gas production is steadily improved. When limestone water can not penetrate into coal reservoirs, the daily water production is low and the daily gas production is high at the beginning of the drainage process, and it almost stops discharging water after some time when the gas come out, the daily gas production increases, and the cumulative water production is much lower.
基金the National Natural Science Foundation of China(50174045)the Natural Science Foundation of Shaanxi Province China(2006E205)
文摘Air leakage may significantly affect the effectiveness of mine ventilation by in- creasing the cost of ventilation and arousing problems for ventilation management.Fur- thermore,air leakage may accelerate the process of coal spontaneous combustion and cause gas explosion,thus greatly threatens the safety of coal production.The estimation of air leakage,therefore,have great practical significance.For any ventilation system of coal mines,there is a defined pattern of pressure gradient which drived the mine air to flow in the network,drives possible air leakage to go shortcut as well.Air leakage may occur through ventilation structures such as ventilation doors and fractures of the surroun- dig coal and rock of airways.A concept and the relevent calculation method of the pres- sure gradient matrix was put forward to assist the analysis of potential air leakage routes. A simplified example was used to introduce the application principle of'pressure gradient matrix in identifying all the potential air leaking routes,which offers a deeper understand- ing over the ventilation system and the prevention of coal spontaneous combustion.
基金financially supported by the National Natural Science Foundation of China(No.11705281)。
文摘TiC, ZrC and TaC modified layers were in-situ prepared on graphite matrix by chemical vapor infiltration method with metal salts as the activator. Taking the TiC modified layer as an example, through thermodynamic calculation and experiment, the thermal decomposition process of raw materials(Ti/K_(2)TiF_(6)) was analyzed, the formation mechanism of TiC was determined, and the distribution of TiC modified layer was modulated. The results show that activator K_(2)TiF_(6)has higher decomposition temperature than NH4Cl, which is conducive to improving the utilization rate of raw materials in the gas infiltration process. Increasing the content of Ti powder can increase the concentration of reaction gas and contribute to the formation of TiC modified layer. When the molar ratio of Ti to K_(2)TiF_(6)is 3:1, the surface thickness and infiltration depth of Ti C are 5.42 and 136.24 μm, respectively. Increasing the reaction temperature can improve the rate of in-situ reaction and the thickness of TiC surface layer. When the experimental temperature rises to 1600 °C, the TiC surface layer thickness increases to 20.27 μm.
文摘In low permeability porous media which permeability anisotropy is ubiquitous,the percolation of fluid no longer follows linear Darcy’s Law.Oil-water two phase flow equation of low permeability reservoir with permeability anisotropy is established based on generalized Darcy’s law and starting pressure gradient,corresponding finite element program is developed and simulated based on the Finite Element Program Generator system (FEPG).The results show that energy-gathering exists in the flow event of flowing area front in low permeability reservoir.In the process of energy-gathering,the flow velocity changed little but increased rapidly as soon as the pressure gradient exceeded the starting pressure gradient of the reservoir,then gradually stabilized.The greater the starting pressure gradient is,the greater the near wellbore pressure drop is,the smaller the area influenced by the reservoir pressure changes caused by water injection and oil recovery.The greater the starting pressure gradient is,the lower the water saturation in same point of the reservoir is,the smaller the water flood swept area is.There will be more difficulties in water injection to the same extent.
