Ground textures seriously interfere with the exact identification of grinding damage. The common nondestructive testing techniques for engineering ceramics are limited by their difficulty and cost. Therefore, this pap...Ground textures seriously interfere with the exact identification of grinding damage. The common nondestructive testing techniques for engineering ceramics are limited by their difficulty and cost. Therefore, this paper proposes a global image reconstruction scheme in ground texture surface using Fourier transform (FT). The lines associated with high-energy frequency components in the spectrum that represent ground texture information can be detected by Hough transform (HT), and the corresponding high-energy frequency components are set to zero. Then the spectrum image is back-transformed into the spatial domain image with inverse Fourier transform (IFT). In the reconstructed image, the main ground texture information has been removed, whereas the surface defects information is preserved. Finally, Canny edge detection is used to extract damage image in the reconstructed image. The experimental results of damage detection for the ground texture surfaces of engineering ceramics have shown that the proposed method is effective.展开更多
Soil structure plays an important role in understanding soil attributes as well as hydrological processes. Effective method to obtain high quality soil map is therefore important for both soil science research and soi...Soil structure plays an important role in understanding soil attributes as well as hydrological processes. Effective method to obtain high quality soil map is therefore important for both soil science research and soil work ability improvement. However,traditional method such as digging soil pits is destructive and time-consuming. In this study, the structure of headwater hillslopes from Hemuqiao catchment(Taihu Basin, China) have been analyzed both by indirect(ground penetrating radar, GPR) and direct(excavation or soil auger) methods. Four transects at different locations of hillslopes in the catchment were selected for GPR survey. Three of them(#1, #2, and #3) were excavated to obtain fullscale soil information for interpreting radar images.We found that the most distinct boundary that can be detected by GPR is the boundary between soil and underlain bedrock. In some cases(e.g., 8-17 m in transect #2), in which the in situ soil was scarcely affected by colluvial process, different soil layers can be identified. This identification process utilized the sensitive of GPR to capture abrupt changes of soil characteristics in layer boundaries, e.g., surface organic layer(layer #1) and bamboo roots layer(layer#2, contain stone fragments), illuvial deposits layer(layer #3) and regolith layer(layer #4). However, in areas where stone fragments were irregularly distributed in the soil profile(highly affected bycolluvial and/or fluvial process), it was possible to distinguish which part contains more stone fragments in soil profile on the basis of reflection density(transect #3). Transect #4(unexcavated) was used to justify the GPR method for soil survey based on experiences from former transects. After that, O horizon thickness was compared by a hand auger.This work has demonstrated that GPR images can be of a potential data source for hydrological predictions.展开更多
In this paper, the authors present ConGrap, a novel contour detector for finding closed contours with semantic connections. Based on gradient-based edge detection, a Gradient Map is generated to store the orientation ...In this paper, the authors present ConGrap, a novel contour detector for finding closed contours with semantic connections. Based on gradient-based edge detection, a Gradient Map is generated to store the orientation of every edge pixel. Using the edge image and the generated Gradient Map, ConGrap separates the image into semantic parts and objects. Each edge pixel is mapped to a contour by a three-stage hierarchical analysis of neighbored pixels and ensures the closing of contours. A final post-process of ConGrap extracts the contour borderlines and merges them, if they semantically relate to each other. In contrast to common edge and contour detections, ConGrap not only produces an edge image, but also provides additional information （e.g., the borderline pixel coordinates the bounding box, etc.） for every contour. Additionally, the resulting contour image provides closed contours without discontinuities and merged regions with semantic connections. Consequently, the ConGrap contour image can be seen as an enhanced edge image as well as a kind of segmentation and object recognition.展开更多
In this paper, we propose a new algorithm for temporally consistent depth map estimation to generate three-dimensional video. The proposed algorithm adaptively computes the matching cost using a temporal weighting fun...In this paper, we propose a new algorithm for temporally consistent depth map estimation to generate three-dimensional video. The proposed algorithm adaptively computes the matching cost using a temporal weighting function, which is obtained by block-based moving object detection and motion estimation with variable block sizes. Experimental results show that the proposed algorithm improves the temporal consistency of the depth video and reduces by about 38% both the flickering artefact in the synthesized view and the number of coding bits for depth video coding.展开更多
Detecting communities from complex networks is an important issue and has attracted attention of researchers in many fields. It is relevant to social tasks, biological inquiries, and technological problems since vario...Detecting communities from complex networks is an important issue and has attracted attention of researchers in many fields. It is relevant to social tasks, biological inquiries, and technological problems since various networks exist in these systems. This paper proposes a new self-organizing map （SOM） based approach to community detection. By adopting a new operation and a new weightupdating scheme, a complex network can be organized into dense subgraphs according to the topological connection of each node by the SOM algorithm. Extensive numerical experiments show that the performance of the SOM algorithm is good. It can identify communities more accurately than existing methods. This method can be used to detect communities not only in undirected networks, but also in directed networks and bipartite networks.展开更多
基金Supported by National Natural Science Foundation of China (No. 51075296)
文摘Ground textures seriously interfere with the exact identification of grinding damage. The common nondestructive testing techniques for engineering ceramics are limited by their difficulty and cost. Therefore, this paper proposes a global image reconstruction scheme in ground texture surface using Fourier transform (FT). The lines associated with high-energy frequency components in the spectrum that represent ground texture information can be detected by Hough transform (HT), and the corresponding high-energy frequency components are set to zero. Then the spectrum image is back-transformed into the spatial domain image with inverse Fourier transform (IFT). In the reconstructed image, the main ground texture information has been removed, whereas the surface defects information is preserved. Finally, Canny edge detection is used to extract damage image in the reconstructed image. The experimental results of damage detection for the ground texture surfaces of engineering ceramics have shown that the proposed method is effective.
基金supported by the National Nature Science Foundation of China (Grants No. 41271040, 51190091)The Special Fund of State Key Laboratory of Hydrology-Water Resources and Hydraulic Engineering (Grant No. 20145028012)
文摘Soil structure plays an important role in understanding soil attributes as well as hydrological processes. Effective method to obtain high quality soil map is therefore important for both soil science research and soil work ability improvement. However,traditional method such as digging soil pits is destructive and time-consuming. In this study, the structure of headwater hillslopes from Hemuqiao catchment(Taihu Basin, China) have been analyzed both by indirect(ground penetrating radar, GPR) and direct(excavation or soil auger) methods. Four transects at different locations of hillslopes in the catchment were selected for GPR survey. Three of them(#1, #2, and #3) were excavated to obtain fullscale soil information for interpreting radar images.We found that the most distinct boundary that can be detected by GPR is the boundary between soil and underlain bedrock. In some cases(e.g., 8-17 m in transect #2), in which the in situ soil was scarcely affected by colluvial process, different soil layers can be identified. This identification process utilized the sensitive of GPR to capture abrupt changes of soil characteristics in layer boundaries, e.g., surface organic layer(layer #1) and bamboo roots layer(layer#2, contain stone fragments), illuvial deposits layer(layer #3) and regolith layer(layer #4). However, in areas where stone fragments were irregularly distributed in the soil profile(highly affected bycolluvial and/or fluvial process), it was possible to distinguish which part contains more stone fragments in soil profile on the basis of reflection density(transect #3). Transect #4(unexcavated) was used to justify the GPR method for soil survey based on experiences from former transects. After that, O horizon thickness was compared by a hand auger.This work has demonstrated that GPR images can be of a potential data source for hydrological predictions.
文摘In this paper, the authors present ConGrap, a novel contour detector for finding closed contours with semantic connections. Based on gradient-based edge detection, a Gradient Map is generated to store the orientation of every edge pixel. Using the edge image and the generated Gradient Map, ConGrap separates the image into semantic parts and objects. Each edge pixel is mapped to a contour by a three-stage hierarchical analysis of neighbored pixels and ensures the closing of contours. A final post-process of ConGrap extracts the contour borderlines and merges them, if they semantically relate to each other. In contrast to common edge and contour detections, ConGrap not only produces an edge image, but also provides additional information （e.g., the borderline pixel coordinates the bounding box, etc.） for every contour. Additionally, the resulting contour image provides closed contours without discontinuities and merged regions with semantic connections. Consequently, the ConGrap contour image can be seen as an enhanced edge image as well as a kind of segmentation and object recognition.
基金supported by the National Research Foundation of Korea Grant funded by the Korea Ministry of Science and Technology under Grant No. 2012-0009228
文摘In this paper, we propose a new algorithm for temporally consistent depth map estimation to generate three-dimensional video. The proposed algorithm adaptively computes the matching cost using a temporal weighting function, which is obtained by block-based moving object detection and motion estimation with variable block sizes. Experimental results show that the proposed algorithm improves the temporal consistency of the depth video and reduces by about 38% both the flickering artefact in the synthesized view and the number of coding bits for depth video coding.
基金This research is supported by the National Natural Science Foundation of China under Grant Nos 10631070, 60873205, 10701080, and the Beijing Natural Science Foundation under Grant No. 1092011. It is also partially supported by the Foundation of Beijing Education Commission under Grant No. SM200910037005, the Funding Project for Academic Human Resources Development in Institutions of Higher Learning under the Jurisdiction of Beijing Municipality （PHR201006217）, and the Foundation of WYJD200902.
文摘Detecting communities from complex networks is an important issue and has attracted attention of researchers in many fields. It is relevant to social tasks, biological inquiries, and technological problems since various networks exist in these systems. This paper proposes a new self-organizing map （SOM） based approach to community detection. By adopting a new operation and a new weightupdating scheme, a complex network can be organized into dense subgraphs according to the topological connection of each node by the SOM algorithm. Extensive numerical experiments show that the performance of the SOM algorithm is good. It can identify communities more accurately than existing methods. This method can be used to detect communities not only in undirected networks, but also in directed networks and bipartite networks.
