Flat thin ice (<30 cm thick) is a common ice type in the Bohai Sea, China. Ice thickness detection is important to offshore exploration and marine transport in winter. Synthetic aperture radar (SAR) can be used to ...Flat thin ice (<30 cm thick) is a common ice type in the Bohai Sea, China. Ice thickness detection is important to offshore exploration and marine transport in winter. Synthetic aperture radar (SAR) can be used to acquire sea ice data in all weather conditions, and it is a useful tool for monitoring sea ice conditions. In this paper, we combine a multi-layered sea ice electromagnetic (EM) scattering model with a sea ice thermodynamic model to assess the determination of the thickness of flat thin ice in the Bohai Sea using SAR at different frequencies, polarization, and incidence angles. Our modeling studies suggest that co-polarization backscattering coefficients and the co-polarized ratio can be used to retrieve the thickness of flat thin ice from C- and X-band SAR, while the co-polarized correlation coefficient can be used to retrieve flat thin ice thickness from L-, C-, and X-band SAR. Importantly, small or moderate incidence angles should be chosen to avoid the effect of speckle noise.展开更多
A survey was carried out with the aim of assessing the level of the total phenolic compounds （TPC）, essential （Na, K, Ca, Mg, Cu, Zn） and toxic （Cd and Pb） elements in 10 Latvian whole grain rye and/or wheat flo...A survey was carried out with the aim of assessing the level of the total phenolic compounds （TPC）, essential （Na, K, Ca, Mg, Cu, Zn） and toxic （Cd and Pb） elements in 10 Latvian whole grain rye and/or wheat flour bread samples, obtained from the local market. The quantities of the TPC were determined by spectrophotometry. Mineral content was determined by flame photometry, flame atom absorption spectrometry （FAAS） and electrothermal atomic absorption spectrometry （ETAA） after wet digestion in concentrated HNO3. The values were comparable to the literature data. The average content in all the samples was （on a basis of weight of the product） 547 ± 28 mg/100 g for Na; 280 ±20 mg/100 g for K; 32 ± 2 mg/100 g for Ca; 88 ±5 mg/100 g for Mg; 0.49 ± 0.09 mg/100 g for Cu; 1.6 ±0.2 mg/100 g for Zn. Both Pb and Cd were determined below the limit of detection （LOD 5 0.10 mg/100 g）. The LOD values were determined for each element. The TPC content in defatted samples was slightly lower than the non-defatted ones, showing the dependence on the sample preparation. The calculated average levels of the elements were compared with the maximum levels recommended or regulated by the national legislation.展开更多
基金Supported by the Major Program of the National Natural Science Foundation of China(No.60890075)the National Natural Science Foundation of China for Young Scientists(No.40906093)
文摘Flat thin ice (<30 cm thick) is a common ice type in the Bohai Sea, China. Ice thickness detection is important to offshore exploration and marine transport in winter. Synthetic aperture radar (SAR) can be used to acquire sea ice data in all weather conditions, and it is a useful tool for monitoring sea ice conditions. In this paper, we combine a multi-layered sea ice electromagnetic (EM) scattering model with a sea ice thermodynamic model to assess the determination of the thickness of flat thin ice in the Bohai Sea using SAR at different frequencies, polarization, and incidence angles. Our modeling studies suggest that co-polarization backscattering coefficients and the co-polarized ratio can be used to retrieve the thickness of flat thin ice from C- and X-band SAR, while the co-polarized correlation coefficient can be used to retrieve flat thin ice thickness from L-, C-, and X-band SAR. Importantly, small or moderate incidence angles should be chosen to avoid the effect of speckle noise.
文摘A survey was carried out with the aim of assessing the level of the total phenolic compounds （TPC）, essential （Na, K, Ca, Mg, Cu, Zn） and toxic （Cd and Pb） elements in 10 Latvian whole grain rye and/or wheat flour bread samples, obtained from the local market. The quantities of the TPC were determined by spectrophotometry. Mineral content was determined by flame photometry, flame atom absorption spectrometry （FAAS） and electrothermal atomic absorption spectrometry （ETAA） after wet digestion in concentrated HNO3. The values were comparable to the literature data. The average content in all the samples was （on a basis of weight of the product） 547 ± 28 mg/100 g for Na; 280 ±20 mg/100 g for K; 32 ± 2 mg/100 g for Ca; 88 ±5 mg/100 g for Mg; 0.49 ± 0.09 mg/100 g for Cu; 1.6 ±0.2 mg/100 g for Zn. Both Pb and Cd were determined below the limit of detection （LOD 5 0.10 mg/100 g）. The LOD values were determined for each element. The TPC content in defatted samples was slightly lower than the non-defatted ones, showing the dependence on the sample preparation. The calculated average levels of the elements were compared with the maximum levels recommended or regulated by the national legislation.
