The fluid flow and oil-water separation were simulated using a Reynolds stress transport equation model of turbulence in water flow and a stochastic model of oil droplet motion. Simulation results give the axial and t...The fluid flow and oil-water separation were simulated using a Reynolds stress transport equation model of turbulence in water flow and a stochastic model of oil droplet motion. Simulation results give the axial and tangential velocity components, the pressure and turbulence intensity distribution and droplet trajectories for a hydrocyclone of F type and a hydrocyclone proposed by the present authors. The flow field predictions are in qualitative agreement with the LDV measurements. The results show that the proposed hydrocyclone has better performance than the hydrocyclone of F type due to creating stronger centrifugal force and lower axial velocity.展开更多
The gas/liquid spiral separator, a key component in the compressed air system, was used to remove liquid and oil from gas stream by centrifugal and gravitational forces. To optimize the design of the separator,the rel...The gas/liquid spiral separator, a key component in the compressed air system, was used to remove liquid and oil from gas stream by centrifugal and gravitational forces. To optimize the design of the separator,the relationship between the performance and structural parameters of separators is studied. Computational fluid dynamics (CFD) method is employed to simulate the flow fields and calculate the pressure drop and separation efficiency of air-liquid spiral separators with different structural parameters. The RSM (Reynolds stress model)turbulence model is used to analyze the highly swirling flow fields while the stochastic trajectory model is used to simulate the traces of liquid droplets in the flow field. A simplified calculation formula of pressure drop in spiral structures is obtained by modifying Darcy's equation and verified by experiment.展开更多
Particle size distributions of obtained samples from several sampling campaigns were determined and raw data were mass balanced before being used in simulation studies.After determination of breakage function,selectio...Particle size distributions of obtained samples from several sampling campaigns were determined and raw data were mass balanced before being used in simulation studies.After determination of breakage function,selection function,Bond work index,residence time distribution parameters,and Whiten's model parameters for air separators and diaphragms between the two compartments of tube ball mills,performance of the circuits was simulated for given throughputs and feed particle size distribution.Whiten's model parameters were determined by GA(genetic algorithm) toolbox of MATLAB software.Based on implemented models for modeling and simulation,optimization of circuits was carried out.It increased nearly 10.5% and 15.8% in fresh feed capacity input to each tube ball mill.In addition,circulating load ratios of circuits are modified to 118% and 127% from low level of 57% and 22%,respectively,and also cut points of air separators are adjusted at 30 and 40 μm from high range of 53 and 97 μm,respectively.All applications helped in well-operation and energy consumption reduction of equipments.展开更多
Air separators provide safe, clean, and appropriate air flow to engines and are widely used in vehicles with large engines such as ships and submarines. In this operational study, the separation process in a Ranque-Hi...Air separators provide safe, clean, and appropriate air flow to engines and are widely used in vehicles with large engines such as ships and submarines. In this operational study, the separation process in a Ranque-Hilsch vortex tube cleaning （cooling） system is investigated to analyze the impact of the operating gas type on the vortex tube performance; the operating gases used are air, nitrogen, oxygen, carbon dioxide and nitrogen dioxide. The computational fluid dynamic model used is equipped with a three-dimensional structure, and the steady-state condition is applied during computations. The standard k-c turbulence model is employed to resolve nonlinear flow equations, and various key parameters, such as hot and cold exhaust thermal drops, and power separation rates, are described numerically. The results show that nitrogen dioxide creates the greatest separation power out of all gases tested, and the numerical results are validated by good agreement with available experimental data. In addition, a comparison is made between the use of two different boundary conditions, the pressure-far-field and the pressure-outlet, when analyzing complex turbulent flows in the air separators. Results present a comprehensive and practical solution for use in future numerical studies.展开更多
A detached eddy simulation(DES) and a k-ε-based Reynolds-averaged Navier–Stokes(RANS) calculation on the co-current spray drying chamber is presented. The DES used here is based on the Spalart–Allmaras(SA) turbulen...A detached eddy simulation(DES) and a k-ε-based Reynolds-averaged Navier–Stokes(RANS) calculation on the co-current spray drying chamber is presented. The DES used here is based on the Spalart–Allmaras(SA) turbulence model, whereas the standard k-ε(SKE) was considered here for comparison purposes. Predictions of the mean axial velocity, temperature and humidity profile have been evaluated and compared with experimental measurements. The effects of the turbulence model on the predictions of the mean axial velocity, temperature and the humidity profile are most noticeable in the(highly anisotropic) spraying region. The findings suggest that DES provide a more accurate prediction(with error less than 5%) of the flow field in a spray drying chamber compared with RANS-based k-ε models. The DES simulation also confirmed the presence of anisotropic turbulent flow in the spray dryer from the analysis of the velocity component fluctuations and turbulent structure as illustrated by the Q-criterion.展开更多
We design a compact terahertz(THz) polarization beam splitter. Both plane wave expansion method and finite-difference time-domain method are used to calculate and analyze the characteristics of the proposed device. Th...We design a compact terahertz(THz) polarization beam splitter. Both plane wave expansion method and finite-difference time-domain method are used to calculate and analyze the characteristics of the proposed device. The designed polarization beam splitter can split TE-polarized and TM-polarized THz waves into different propagation directions. The simulation results show that the extinction ratios are larger than 18.36 dB for TE polarization and 13.35 dB for TM polarization in the frequency range from 1.86 THz to 1.91 THz, respectively. The designed polarization beam splitter has the advantages of small size and compact structure with a total size of 4.825 mm×0.400 mm.展开更多
A detailed parametric study is conducted on three-dimensional gas-solid multiphase flow characteristics in inertial separators via numerical simulation. The carrier phase is treated in the Eulerian frame, the particle...A detailed parametric study is conducted on three-dimensional gas-solid multiphase flow characteristics in inertial separators via numerical simulation. The carrier phase is treated in the Eulerian frame, the particles are tracked in the Lagrangian frame, and particle-wall collision and particle-particle collision are considered. The inertial separators are made out of U-beam tube, arranged staggered .The separator has good performance for large particles and its compact structures make it easy to manufacture and install. The simulation is carried out in different inflow rate and provide the pressure losses in the separators, velocity field of gas phase, the trajectories of particles and the separation efficiency of separators. The result from this study not only shows the multiphase flow-dynamic characteristics of the separators, but also gives the relationship among the efficiency, structure and pressure losses of the separator. The comparison between the numerical simulation result and experimental data demonstrate the reliability of the numerical simulation.展开更多
In this paper, we propose a scheme to generate an entangled state between two spatially separated movable mirrors by injecting the two-mode squeezed optical reservoir to the dissipative optomechanics, in which the mov...In this paper, we propose a scheme to generate an entangled state between two spatially separated movable mirrors by injecting the two-mode squeezed optical reservoir to the dissipative optomechanics, in which the movable mirrors can modulate the linewidth of the cavity modes. When the coupling between the mirrors and the corresponding cavity modes is weak, the two driven cavity fields can respectively behave as the squeezed-vacuum reservoir for the two movable mirrors by utilizing the effect of completely destructive interference of quantum noise. Thus the mechanical modes are prepared in a two-mode squeezed vacuum state. Moreover,when the coupling between the two mirrors and the cavities modes is strong, the entanglement between the two movable mirrors decreases because photonic excitation can preclude the completely destructive interference of quantum noise, but the movable mirrors are still entangled.展开更多
基金Supported by the Special Funds for Major State Basic Research (No. 1999-0222-08).
文摘The fluid flow and oil-water separation were simulated using a Reynolds stress transport equation model of turbulence in water flow and a stochastic model of oil droplet motion. Simulation results give the axial and tangential velocity components, the pressure and turbulence intensity distribution and droplet trajectories for a hydrocyclone of F type and a hydrocyclone proposed by the present authors. The flow field predictions are in qualitative agreement with the LDV measurements. The results show that the proposed hydrocyclone has better performance than the hydrocyclone of F type due to creating stronger centrifugal force and lower axial velocity.
文摘The gas/liquid spiral separator, a key component in the compressed air system, was used to remove liquid and oil from gas stream by centrifugal and gravitational forces. To optimize the design of the separator,the relationship between the performance and structural parameters of separators is studied. Computational fluid dynamics (CFD) method is employed to simulate the flow fields and calculate the pressure drop and separation efficiency of air-liquid spiral separators with different structural parameters. The RSM (Reynolds stress model)turbulence model is used to analyze the highly swirling flow fields while the stochastic trajectory model is used to simulate the traces of liquid droplets in the flow field. A simplified calculation formula of pressure drop in spiral structures is obtained by modifying Darcy's equation and verified by experiment.
基金financially supported by University of Tehran under contract number 450/51027041 with Iran Ministry of Industries and Mines
文摘Particle size distributions of obtained samples from several sampling campaigns were determined and raw data were mass balanced before being used in simulation studies.After determination of breakage function,selection function,Bond work index,residence time distribution parameters,and Whiten's model parameters for air separators and diaphragms between the two compartments of tube ball mills,performance of the circuits was simulated for given throughputs and feed particle size distribution.Whiten's model parameters were determined by GA(genetic algorithm) toolbox of MATLAB software.Based on implemented models for modeling and simulation,optimization of circuits was carried out.It increased nearly 10.5% and 15.8% in fresh feed capacity input to each tube ball mill.In addition,circulating load ratios of circuits are modified to 118% and 127% from low level of 57% and 22%,respectively,and also cut points of air separators are adjusted at 30 and 40 μm from high range of 53 and 97 μm,respectively.All applications helped in well-operation and energy consumption reduction of equipments.
文摘Air separators provide safe, clean, and appropriate air flow to engines and are widely used in vehicles with large engines such as ships and submarines. In this operational study, the separation process in a Ranque-Hilsch vortex tube cleaning （cooling） system is investigated to analyze the impact of the operating gas type on the vortex tube performance; the operating gases used are air, nitrogen, oxygen, carbon dioxide and nitrogen dioxide. The computational fluid dynamic model used is equipped with a three-dimensional structure, and the steady-state condition is applied during computations. The standard k-c turbulence model is employed to resolve nonlinear flow equations, and various key parameters, such as hot and cold exhaust thermal drops, and power separation rates, are described numerically. The results show that nitrogen dioxide creates the greatest separation power out of all gases tested, and the numerical results are validated by good agreement with available experimental data. In addition, a comparison is made between the use of two different boundary conditions, the pressure-far-field and the pressure-outlet, when analyzing complex turbulent flows in the air separators. Results present a comprehensive and practical solution for use in future numerical studies.
基金Supported by the Ministry of Education Malaysia through RACE(RDU121308)and FRGS(RDU130136)
文摘A detached eddy simulation(DES) and a k-ε-based Reynolds-averaged Navier–Stokes(RANS) calculation on the co-current spray drying chamber is presented. The DES used here is based on the Spalart–Allmaras(SA) turbulence model, whereas the standard k-ε(SKE) was considered here for comparison purposes. Predictions of the mean axial velocity, temperature and humidity profile have been evaluated and compared with experimental measurements. The effects of the turbulence model on the predictions of the mean axial velocity, temperature and the humidity profile are most noticeable in the(highly anisotropic) spraying region. The findings suggest that DES provide a more accurate prediction(with error less than 5%) of the flow field in a spray drying chamber compared with RANS-based k-ε models. The DES simulation also confirmed the presence of anisotropic turbulent flow in the spray dryer from the analysis of the velocity component fluctuations and turbulent structure as illustrated by the Q-criterion.
基金supported by the National Natural Science Foundation of China(Nos.61379024 and 61131005)the Zhejiang Provincial Outstanding Youth Foundation(No.LR12F05001)
文摘We design a compact terahertz(THz) polarization beam splitter. Both plane wave expansion method and finite-difference time-domain method are used to calculate and analyze the characteristics of the proposed device. The designed polarization beam splitter can split TE-polarized and TM-polarized THz waves into different propagation directions. The simulation results show that the extinction ratios are larger than 18.36 dB for TE polarization and 13.35 dB for TM polarization in the frequency range from 1.86 THz to 1.91 THz, respectively. The designed polarization beam splitter has the advantages of small size and compact structure with a total size of 4.825 mm×0.400 mm.
文摘A detailed parametric study is conducted on three-dimensional gas-solid multiphase flow characteristics in inertial separators via numerical simulation. The carrier phase is treated in the Eulerian frame, the particles are tracked in the Lagrangian frame, and particle-wall collision and particle-particle collision are considered. The inertial separators are made out of U-beam tube, arranged staggered .The separator has good performance for large particles and its compact structures make it easy to manufacture and install. The simulation is carried out in different inflow rate and provide the pressure losses in the separators, velocity field of gas phase, the trajectories of particles and the separation efficiency of separators. The result from this study not only shows the multiphase flow-dynamic characteristics of the separators, but also gives the relationship among the efficiency, structure and pressure losses of the separator. The comparison between the numerical simulation result and experimental data demonstrate the reliability of the numerical simulation.
基金supported by the National Natural Science Foundation of China(Grant Nos.61275123,11474119 and 11304024)the National Basic Research Program of China(Grant No.2012CB921602)
文摘In this paper, we propose a scheme to generate an entangled state between two spatially separated movable mirrors by injecting the two-mode squeezed optical reservoir to the dissipative optomechanics, in which the movable mirrors can modulate the linewidth of the cavity modes. When the coupling between the mirrors and the corresponding cavity modes is weak, the two driven cavity fields can respectively behave as the squeezed-vacuum reservoir for the two movable mirrors by utilizing the effect of completely destructive interference of quantum noise. Thus the mechanical modes are prepared in a two-mode squeezed vacuum state. Moreover,when the coupling between the two mirrors and the cavities modes is strong, the entanglement between the two movable mirrors decreases because photonic excitation can preclude the completely destructive interference of quantum noise, but the movable mirrors are still entangled.
