我国模切机概述与未来发展方向

首先,分析模切机市场,指出我国模切机同时面临着机遇与挑战;其次,分析模切工艺、模切机的类型与特点,确定模切机的发展轨迹;再次,阐述并对比国内外模切机的现状,分析我国与国外的差距;最后,阐述我国模切机存在的问题,提出从提高速度、精度、稳定性以及标准化程度来提升内在,从提升互联、智能控制、智慧服务来实现超越,推动我国模切机的发展。

Shear wave velocity prediction during CO_2-EOR and sequestration in the Gao89 well block of the Shengli Oilfield

Shear-wave velocity is a key parameter for calibrating monitoring time-lapse 4D seismic data during CO2-EOR （Enhanced Oil Recovery） and CO2 sequestration. However, actual S-wave velocity data are lacking, especially in 4D data for CO2 sequestration because wells are closed after the CO2 injection and seismic monitoring is continued but no well log data are acquired. When CO2 is injected into a reservoir, the pressure and saturation of the reservoirs change as well as the elastic parameters of the reservoir rocks. We propose a method to predict the S-wave velocity in reservoirs at different pressures and porosities based on the Hertz-Mindlin and Gassmann equations. Because the coordination number is unknown in the Hertz Mindlin equation, we propose a new method to predict it. Thus, we use data at different CO2 injection stages in the Gao89 well block, Shengli Oilfield. First, the sand and mud beds are separated based on the structural characteristics of the thin sand beds and then the S-wave velocity as a function of reservoir pressure and porosity is calculated. Finally, synthetic seismic seismograms are generated based on the predicted P- and S-wave velocities at different stages of CO2 injection.

An intersection method for locating earthquakes in complex velocity models

The intersection method is one of the basic approaches for locating earthquakes and is not only robust but also efficient. However, its location accuracy is not high, especially for focal depth because the velocity model used for the conventional intersection method is based on homogeneous or laterally homogeneous media, which is too simple. In order to improve the accuracy, we have modified the existing intersection method. In the modified approach, the earthquake loci are not assumed to be circular or hyperbolic and calculation accuracy is improved using a minimum traveltime tree algorithm for tracing rays. The numerical model shows that the modified method can locate earthquakes in complex velocity models.

纸箱的圆压圆模切

纸箱的圆压圆模切方式正越来越受到纸箱厂的青睐，因为它的效率高，运行成本低。但是普遍存在的一个误解是圆压圆模切出来的纸箱精度低，而且似乎解决起来难度大，很多纸箱厂望而却步。

Characterization of shear stresses in nickel-based superalloy Mar-M247 when orthogonal machining with coated carbide tools

Mar-M247 is a nickel-based alloy which is well known as difficult-to-machine material due to its characteristics of high strength, poor thermal diffusion and work hardening. Calculation of shear stress by an analytical force model to indicate the effect of coating material, cutting speed, feed rate on tool life and surface roughness was conducted experimentally. Cutting tests were performed using round inserts, with cutting speeds ranging from 50 to 300 rn/min, and feed rates from 0.1 to 0.4 mm/tooth, without using cooling liquids. The behavior of the TiN and TiCN layers using various cutting conditions was analyzed with orthogonal machining force model. Cutting results indicate that different coated tools, together with cutting variables, play a significant role in determining the machinability when milling Mar-M247.

Specific energy optimization in sawing of rocks using Taguchi approach

This work aims at selecting optimal operating variables to obtain the minimum specific energy(SE) in sawing of rocks.A particular granite was sampled and sawn by a fully automated circular diamond sawblades.The peripheral speed,the traverse speed,the cut depth and the flow rate of cooling fluid were selected as the operating variables.Taguchi approach was adopted as a statistical design of experimental technique for optimization studies.The results were evaluated based on the analysis of variance and signal-to-noise ratio(S/N ratio).Statistically significant operating variables and their percentage contribution to the process were also determined.Additionally,a statistical model was developed to demonstrate the relationship between SE and operating variables using regression analysis and the model was then verified.It was found that the optimal combination of operating variables for minimum SE is the peripheral speed of 25 m/s,the traverse speed of 70 cm/min,the cut depth of 2 cm and the flow rate of cooling fluid of 100 mL/s.The cut depth and traverse speed were statistically determined as the significant operating variables affecting the SE,respectively.Furthermore,the regression model results reveal that the predictive model has a high applicability for practical applications.

Study on Low-Temperature Traction Behavior of a Space Lubricating Oil No.4116

The traction behavior of space lubricating oil No. 4116 was measured and analyzed at various oil inlet temperatures below 0 ℃ and various rolling speeds under normal loads by a test rig simulating the operating conditions of space bearings. A traction coefficient calculation model was presented. The rheological property and rheological parameters of the lubricant at a low oil inlet temperature were analyzed based on the Tevaarwerk-Johnson model. The results showed that the lubricating oil No. 4116 was sensitive to the rolling speed and had lower sensitivity to the normal load. This lubricating oil is more suitable for applications under high speed when it is used below 0 ℃. It behaves as an elastic-plastic fluid operating below 0 ℃. Both the average limiting shear stress and the average elastic shear modulus have a negative correlation with the rolling speed and oil inlet temperature and have a positive correlation with the normal load.