具有均匀相位耦合输出镜非稳腔的模场分析

利用 Ｐｒｏｎｙ［１］方法计算均匀相位输出耦合镜非稳腔的输出模场分布及远场方向性，分析了模式分辨率和光束远场发散角与系统各参数之间的关系，理论计算得到的结果表明，可以在小放大倍率（ Ｍ ＝ １．３）情况下得到质量达到衍射极限的输出光束，与传统非稳腔比较，这种新型的谐振腔在改善氧碘化学激光器光束质量方面有一定的应用前景。

PPLN谐振倍频外腔输出模场的模拟研究

为了探究PPLN外部谐振倍频腔的输出模式,从菲涅尔-基尔霍夫衍射积分公式出发,采用快速傅里叶变换法(FFT)和Fox-Li迭代法数值模拟高斯反射率圆形平凹倍频腔输出基模的场强分布、相位分布和光束质量M2因子,同时与圆形双凹倍频腔做了比较。计算结果表明,两类倍频谐振腔输出基模均为高斯分布,腔长变化对两类倍频腔输出光束质量的影响较小。平凹倍频腔输出光束质量M2=1.296,远场发散角θ=58.084μrad;而双凹倍频腔输出光束质量M2=6.930,θ=310.56μrad。平凹倍频腔输出光束质量明显优于双凹倍频腔。

基于有限元方法的光子晶体光纤特性分析

光子晶体光纤具有传统光纤所无法比拟的特性,是近几年光纤领域研究的一个新热点,分析它的传输特性越来越重要。从麦克斯韦方程出发,运用有限元方法研究全内反射光子晶体光纤的一些特性,在考虑纯石英材料自身色散的前提下计算光子晶体光纤模场分布,基模有效折射率,归一化频率等参数。结果表明,随着空气孔占空比的增加,模式折射率逐渐减小;合理设计光纤结构参数可以实现全波段内单模传输。在此基础上,设计了锥体光子晶体光纤,并给出其模场分布,为光子晶体光纤器件的设计提供了参考依据.

90°束转动环形非稳腔模场数值分析

用矩阵方法导出了ＵＲ９０（ｕｎｓｔａｂｌｅｒｉｎｇｒｅｓｏｎａｔｏｒｗｉｔｈ９００１６７ｂｅａｍｒｏｔａｔｉｏｎ）环形非稳腔的衍射积分方程，获得了腔的等价菲涅耳数Ｎｅｑ的关系公式，分析了反向模的抑制方法并给出反向模抑制镜的曲率半径，通过数值计算的方法阐明了腔模本征值与放大因子Ｍ的变化关系，当腔的放大因子Ｍ＝１．２时，得到了腔的模场分布曲线。

锥形光纤在空间光通信耦合系统中的应用

为了提高自由空间光通信的接收端耦合效率,将锥形光纤应用于光耦合,依据BPM算法的仿真结果使用熔融拉锥法制备了满足低损传输条件的锥形光纤。在实验上研究了锥形光纤和双锥形光纤模场传输特性。通过静态空间光-光纤耦合实验,对比了多/单模熔接光纤和锥形光纤光耦合效率和传输效率的差异,并研究了以上两种光纤结构耦合效率的横向偏移量容差。结果表明,锥形光纤的传输效率约为70%,具有低损传输特性、用于匹配后端单模光电子器件的良好滤波特性以及相比普通光纤更高的横向偏移量容差特性,因此可以广泛应用于自由空间光通信接收端光耦合、模式转换器等方面。

Analytical Model of Surface Field Distribution and Breakdown Voltage for RESURF LDMOS Transistor

An analytical model of the surface field distribution and breakdown voltage of the reduced surface field lateral double diffusion MOS transistor is proposed.Based on the 2-D Poisson's equation solution,the derived model gives the closed form solutions of the surface potential and electrical field distributions as a function of the structure parameters and drain bias.A criterion for obtaining the optimal trade-off between the breakdown voltage and on-resistance is also presented to serve to quantify the maximum breakdown voltage and optimal relations of all design parameters.Analytical results are shown in good agreement with the numerical analysis obtained by the semiconductor device simulator MEDICI and previous reported experimental data.

Current Situation and Prospect Analysis of Biogas Project in Scale Farms in Chengdu

In order to implement National Sustainable Development of Agriculture 2015-2030 and supply-side reform of agriculture, and seek the way to replace chemical fertilizer by livestock and poultry manure, the animal breeding scale and the demand space for biogas project were analyzed according to the changes in farm scale and farm quantity, the present situation of livestock breeding, the biogas technical pattern and present project quantity in Chengdu. Furthermore, based on the cultivated land area in Chengdu, a principle that ＂land decides production, pro- duction decides fertilizer, and fertilizer decides livestock＂ was proposed, and a pro- gram for the livestock quantity and biogas projects in Chengdu in ＂The 13th Five- Year＂ was suggested. Suggestions were also made for government to modify the allowance standards for biogas project construction.

Numerical Simulation and Analysis of Gas Flow Field in Serrated Valve Column

A three-dimensional computational fluid dynamics （CFD） model for gas flow through a serrated valve tray was presented. The flow field, as well as the dry-pressure drop of the valve under the full-opening condition was simulated based on the proposed model by using FLUENT 6.0 software. Compared with the values of dry-pressure dro.p in different turbulent models, the.simulated.results using RNG κ-ε model are in reasonable agreement with experimental data, indicating that RNG κ-ε model is suitable in simulating gas flow through the serrated valve tray. Then the CFD model combining RNG κ-ε model was used to study the three-dimensional gas flow through the considered serrated valve tray. The simulated results showed that various eddies existed on the serrated valve tray, and both the eddy and the non-eddy areas were nearly equal. The existence of addendum can decrease the eddy area caused by gas passing through the lateral outlet slots. The size of eddies can be reduced by optimizing the distance between valves.

An optimized hardness model for carburizing-quenching of low carbon alloy steel

Research has been conducted about the hardness prediction for the carburizing and quenching process based on an optimized hardness simulation model,in accordance with the calculation rule of mixed phases.The coupling field model incorporates carburizing field analysis,temperature field analysis,phase transformation kinetics analysis and a modified hardness calculation model.In determination of the calculation model for hardness,calculation equations are given to be applied to low carbon content(x(C)<0.5%) for the child phases and the martensite hardness is calculated for high carbon content(x(C)>0.5%) in alloy.Then,the complete carburizing-quenching hardness calculation model is built,and the hardness simulation data are corrected considering the influence of residual austenite(RA) on hardness.Hardness simulations of the carburizing and quenching process of 17CrNiMo6 samples have been performed using DEFORM-HT_V10.2 and MATLAB R2013 a.Finally,a series of comparisons of simulation results and measured values show a good agreement between them,which validates the accuracy of the proposed mathematical model.

Optimal control of pricing strategy for diffusion model

This study presents a conceptual framework based on the new product diffusion and demand theory models. The proposed framework was creating a probability of demand function. Considering effectiveness of demand function transmitted by adopters, the optimal control policies of pricing are conducted according to the optimal control theorv.

Experimental and simulation investigation into the cause and treatment of rail corrugation for metro

The cause and treatment of rail corrugation for the metro have always been a popular and challenging issue. In this work, the field measurements were carried out on rail corrugation, track stiffness, and the track dynamic response. A three-dimensional finite element model was developed to investigate the cause of rail corrugation. The constraints on rail vibration from two wheelsets and adjacent wheel-rail interactions were taken into account in the model. According to experimental and simulation results, the suppression measure for rail corrugation was proposed and the suppression mechanism was discussed. It was found that the cause of rail corrugation is related to vertical and lateral vibration of the rails outside the two wheelsets at around 380 Hz. The increased stiffness of the fasteners reduces the vibration energy of the rail and the wheel-rail force. However, simply increasing the stiffness of the fasteners may not be effective in the suppression of rail corrugation. If necessary, the rails need to be grinded to reduce the roughness to a certain level, so that increasing the fastener stiffness can effectively suppress the rail corrugation.

Field analysis of metallogenic information and its application

Focusing on the issue to deal with inadequate extraction of metallogenic information especially geological information,a new method of extracting metallogenic information based on field model,i.e.the field analysis method of metallogenic information,was proposed.In addition,a case study by using the method of the extraction of metallogenic information from the west Guangxi and southeast Yunnan district as an example was performed.The representation method for the field models of metallogenic information,including the metallogenic influence field model and the metallogenic distance field model,was discussed by introducing the concept of the field theory,based on the characteristic analysis of the distance gradualness and the influence superposition of metallogenic information.According to the field theory superposition principle and the spatial distance analysis method,the mathematical models for the metallogenic influence field and the metallogenic distance field of point,line and area geological bodies were derived out by using parameter equation and calculus.Based on the metallogenic background analysis,the metallogenic information field models of synsedimentary faults and manganese sedimentary basins were built.The relationship between the metallogenic information fields and the manganese mineralization distribution was also investigated by using the method of metallogenic information field analysis.The instance study indicates that the proposed method of metallogenic information field analysis is valid and useful for extracting the ore-controlling information of synsedimentary faults and manganese sedimentary basins in the study area,with which the extraction results are significant both statistically and geologically.

Application of fuzzy integrated evaluation in the safety of coal industry of China

Based on fuzzy integrated evaluation theory, the safety of coal industry was analyzed, the factors affecting the safety of coal industry was considered, and its fuzzy in- tegrated estimating theory and results were given. Finally this paper proposed a new method of industry safety estimation. According to this method, we can integrate the fac- tors affecting coal industry and deal with the parameters and targets of evaluating factors by quantitative analysis, thus give a scientific and reasonable safety degree analyzing evaluation.

Manganese potential mapping in western Guangxi-southeastern Yunnan(China) via spatial analysis and modal-adaptive prospectivity modeling

While the region of western Guangxi-southeastern Yunan, China, is known and considered prospective for manganese deposits, carrying out prospectivity mapping in this region is challenging due to the diversity of geological factors, the complexity of geological process and the asymmetry of geo-information. In this work, the manganese potential mapping for further exploration targeting is implemented via spatial analysis and modal-adaptive prospectivity modeling. On the basis of targeting criteria developed by the mineral system approach, the spatial analysis is leveraged to extract the predictor variables to identify features of the geological process. Specifically, a metallogenic field analysis approach is proposed to extract metallogenic information that quantifies the regional impacts of the synsedimentary faults and sedimentary basins. In the integration of the extracted predictor variables, a modal-adaptive prospectivity model is built, which allows to adapt different data availability and geological process. The resulting prospective areas of high potential not only correspond to the areas of known manganese deposits but also provide a number of favorable targets in the region for future mineral exploration.

Spontaneous caving and gob-side entry retaining of thin seam with large inclined angle

Based on the research method of combining simulation analysis with field testing by distinct element process UDEC, we have analyzed the roof deformation and failure laws and roadway support technology of gob-side entry retaining in a thin seam with a large inclined angle. The results show that during exploitation in seams with large inclined angle, rotational subsidence of the main roof under the gob area is small and can maintain balance, so there is no need to provide artificial permanent support resistance for the main roof near the upper side to control rotational subsidence. Obstructed by the dense scrap rail,waste rock from the immediate roof caving slides from the upper gob area to the lower area and fills it,which strikes a balance between the immediate roof under the goaf after it fractures into large pieces and filling waste rocks.

Parametric analysis on buffeting performance of a long-span high-speed railway suspension bridge

The buffeting performance of kilometer-level high-speed railway suspension bridges has a great impact on the smooth operation of high-speed trains.To investigate the buffeting performance of the structure significantly different from traditional suspension bridges,the first long-span high-speed railway suspension bridge,Wufengshan Yangtze River Bridge(WYRB),is taken as a numerical example to demonstrate the effects of structural parameters and wind field parameters on the buffeting responses.Based on the design information,the spatial finite element model(FEM)of WYRB is established before testing its accuracy.The fluctuating wind fields are simulated via both classical and stochastic wave based spectral representation method(SRM).Finite element method is further taken to analyze the parametric sensitivity on wind induced buffeting responses in time domain.The results show that the vertical displacement is more sensitive to the changing dead load than the lateral and torsional ones.The larger stiffness of the main girder and the lower sag-to-span ratio are both helpful to reduce the buffeting responses.Wind spectrum and coherence function are key influencing factors to the responses so setting proper wind field parameters are essential in the wind-resistant design stage.The analytical results can provide references for wind resistance analysis and selection of structural and fluctuating wind field parameters for similar long-span high-speed railway suspension bridges.

Numerical analysis of stability for mined-out area in multi-field coupling

There were differences between real boundary and blast hole controlling boundary of irregular mined-out area in underground metal mines. There were errors in numerical analysis of stability for goaf, if it was analyzed as regular 3D mined-out area and the influence of coupling stress-seepage-disturbance was not considered adequately. Taking a lead zinc mine as the background, the model was built by the coupling of Surpac and Midas-Gts based on the goaf model precisely measured by CMS.According to seepage stress fundamental equations based on the equivalent continuum mechanical and the theory about equivalent load of dynamic disturbance in deep-hole blasting, the stability of mined-out area under multi-field coupling of stress-seepage-dynamic disturbance was numerically analyzed. The results show that it is more consistent between the numerical analysis model based on the real model of irregular 3D shape goaf and the real situation, which could faithfully reappear the change rule of stress–strain about the surrounding rock under synthetic action of blasting dynamic loading and the seepage pressure. The mined-out area multi-field coupling formed by blasting excavation is stable. Based on combination of the advantages of the CMS,Surpac and Midas-Gts, and fully consideration of the effects of multi-field coupling, the accurate and effective way could be provided for numerical analysis of stability for mined-out area.

Effect of Market Power in Electricity Markets

The main objective of this paper is to show an overview analysis of market power issues.Market power reflects the scarcity of power supply.It is the ability of a particular seller or group of sellers to maintain prices profitably above competitive levels for a significant period of time.Because the electric power system has its own characteristics that are different to other economic systems,both physical factors and economic factors of power system are key elements on this definition.We study some cases here,including different line limit levels,load levels and bid strategy through a market model based on OPF (optimal power flow) with a decommitment algorithm.

Analyzing Motion Patterns in Crowded Scenes via Automatic Tracklets Clustering

Crowded scene analysis is currently a hot and challenging topic in computer vision field. The ability to analyze motion patterns from videos is a difficult, but critical part of this problem. In this paper, we propose a novel approach for the analysis of motion patterns by clustering the tracklets using an unsupervised hierarchical clustering algorithm, where the similarity between tracklets is measured by the Longest Common Subsequences. The tracklets are obtained by tracking dense points under three effective rules, therefore enabling it to capture the motion patterns in crowded scenes. The analysis of motion patterns is implemented in a completely unsupervised way, and the tracklets are clustered automatically through hierarchical clustering algorithm based on a graphic model. To validate the performance of our approach, we conducted experimental evaluations on two datasets. The results reveal the precise distributions of motion patterns in current crowded videos and demonstrate the effectiveness of our approach.

Numerical simulation study of gob air leakage field and gas migration regularity in downlink ventilation

Aiming at the issue that mass of gas emission from mining gob and the gas exceeded in working face, gob air leakage field and gas migration regularity in downlink ventilation was studied. In consideration of the influence of natural wind pressure to analyze the stope face differential pressure, gob air leakage field distribution and gas migration regularity theoretically. Established a two-dimensional physical model with one source and one doab, and applied computational fluid dynamics analysis software Fluent to do numerical simulation, analyzed and contrasted to the areas of gob air leakage on size and gas emission from gob to working face on strength when using the downlink ventilation and uplink ventilation. When applied downward ventilation in stope face, the air leakage field of gob nearly working face, and the air leakage intensity were smaller than uplink, this can effectively reduce the gas emission from gob to working face; when used downlink ventilation, the air leakage airflow carry the lower amount of gas to doab than uplink ventilation, and more easily to mix the gas, reduced the possibility of gas accumulation in upper comer and the stratified flows, it can provide protection to mine with safe and effective production.