注塑制品残余应力的分析与计算

注塑制品已广泛应用于生活、生产等各个方面,注塑制品的残余应力是决定制品形状、表面质量、使用性能的主要因素。注塑制品的残余应力有两个来源:一个是流动残余应力,一个是热残余应力。结合熔体在注塑过程中的粘弹性变化特点,分析了注塑制品残余应力的产生原因和影响因素,给出了残余应力的计算方法。研究残余应力的产生机理对改善成型加工工艺条件、提高产品质量、降低废品率具有重要意义。

Temperature sensing property of microdisk resonator

The transmission equation of microdisk resonator is obtained by the transfer matrix method.The physical model is built and the electric field distribution,output spectrum and phase of the microdisk resonator are simulated by three-dimensional finite element software.The influence of the structural parameters on transmission characteristics and the temperature sensing property of the microdisk resonator are studied deeply.The results show that the output spectrum will change significantly with the distance between the microdisk and the straight waveguide within a certain range but there is no apparent change in the phase of the output port.The extinction ratio and maxima sensitivity of the device will reach 30 dB and 45 pm/℃,respectively.Microdisk has higher integration,higher quality factor and wider free spectral range compared with common microring resonator.

Effect of wall temperature and random distribution of micro organic dust particles on their combustion parameters

The effect of wall temperature on the characteristics of random combustion of micro organic particles with recirculation was investigated. The effect of recirculating in micro-combustors is noticeable, hence it is necessary to present a model to describe the combustion process in these technologies. Recirculation phenomenon is evaluated by entering the exhausted heat from the post flam zone into the preheat zone. In this work, for modeling of random situation at the flame front, the source term in the equation of energy was modeled considering random situation for volatizing of particles in preheat zone. The comparison of obtained results from the proposed model by experimental data regards that the random model has a better agreement with experimental data than non-random model. Also, according to the results obtained by this model, wall temperature affects the amount of heat recirculation directly and higher values of wall temperature will lead to higher amounts of burning velocity and flame temperature.

C-Nanostructures Cluster Models in Organic Solvents： Fullerenes, Tubes, Buds and Graphenes

The existence of nanographene in cluster form is discussed in organic solvents. Theories are developed based on the columnlet, bundlet and droplet models describing the size-distribution functions. Phenomena present a unified explanation in the columnlet model in which free energy of Cgraphene involved in cluster is combined from a volume part proportional to the number of molecules n in cluster and a constant. The columnlet model enables describing distribution function of Cgraphene clusters by size. From purely geometrical considerations the columnlet （Cgraphene）, bundlet （single-wall carbon nanotube）, CNT （carbon nanotube）, SWNT （single-wall C-nanotube）, and carbon nanobud, CNB （carbon nanobud）） and droplet （fullerene） models predict dissimilar behaviours. The interaction-energy parameters of Cgraphene are taken from C60. An CNB behaviour or further is expected. The decay of solubility with rising temperature is smaller for Cgraphene than for SWNT and CNB and, furthermore, than for C60, in agreement with lesser numbers of units in Cgraphene clusters. The discrepancy between the experimental data of the heat of solution of fullerenes, CNTs, CNBs and graphenes is ascribed to the sharp concentration dependence of the heat of solution. The diffusion coefficient drops with temperature result greater for Cgraphene than CNB and SWNT than C60 corresponding to lesser number of units in clusters. The aggregates near （C60）13, SWNT/CNB7 and （Cgraphene）3 could be representative of the droplet, bundlet and columnlet models.

DNS of a spatially evolving hypersonic turbulent boundary layer at Mach 8

This paper reports the direct numerical simulation (DNS) for hypersonic turbulent boundary layer over a flat-plate at Ma∞ =8 with the ratio of wall-to-freestream temperature equal to 1.9, which indicates an extremely cold wall condition. It is primarily used to assess the wall temperature effects on the mean velocity profile, Walz equation, turbulent intensity, strong Reynolds analogy (SRA), and compressibility. The present high Mach number with cold wall condition induces strong compressibility effects. As a result, the Morkovin's hypothesis is not fully valid and so the classical SRA is also not fully consistent. However, some modified SRA is still valid at the far-wall region. It is also verified that the semi-local wall coordinate y* is better than conventional y+ in analysis of statistics features in turbulent boundary layer (TBL) in hypersonic flow.

Numerical Modeling of the Solidification Phase Change in a Pipe and Evaluation of the Effect of Boundary Conditions

A numerical solution to a two-dimensional model of flow and transient heat transfer involving solidification in a pipe has been established.Where the temperature of pipe wall is below the freezing point of fluid,phase change of flowing fluid and the influence of different boundary condition,such as pipe wall temperature,initial temperature and inlet velocity has been taken into account.Also it has been investigated to elicit proper non-dimensional numbers to show the solidification proceeding results.Additionally comparing the two acceptable inlet conditions,show distinctions between velocity inlet and pressure inlet boundary condition in such problems,which affect the whole freezing process.