Solute transmission in saturated ore heap was studied numerically and experimentally. The convection-diffusion equation (CDE) used to describe the mass transportation in porous media was solved by characteristic diffe...Solute transmission in saturated ore heap was studied numerically and experimentally. The convection-diffusion equation (CDE) used to describe the mass transportation in porous media was solved by characteristic difference method to give the distribution of the concentration of ferrous ion in the ore column. To calibrate the computational model, a column test was performed using infiltration of sulfide ferrous solution (the initial concentration is c0=0.04 mol/L) on a 100 cm high column composed of ore particles smaller than 10 mm for 2.5 h. The numerical analysis shows that the results obtained from numerical modeling under the same operating conditions as used for column test are in good agreement with those from experimental procedure on the whole trend, which indicates that the model, the numerical method, and the parameters chosen can reflect the rule of ferrous ion transmission in ore heap.展开更多
Detailed investigation of flow behavior in structured packing distillation columns is of great importance in accurate prediction of process efficiency and development of more efficient and optimal equipment internals....Detailed investigation of flow behavior in structured packing distillation columns is of great importance in accurate prediction of process efficiency and development of more efficient and optimal equipment internals. In this study, a three-dimensional two-phase flow model based on VOF method for simulating the hydrodynamics and mass-transfer behavior in a typical representative unit of the structured packing is developed. In the proposed model, the c 2 - ε c model is used for the closure of turbulent mass transfer equation. By solving the proposed model, the velocity distribution, phase fraction profile and concentration field are obtained. Using these data, the total liquid holdup, the wetted area and the separation efficiency [height equivalent to a theoretical plate (HETP)] are estimated. For testing the model validation, the simulated HETPs are compared with our previous experimental data obtained in a 150 mm-diameter column containing Mellapak 350Y operating at the pressures of 0.6-1.8 MPa. The compari-son shows that they are in satisfactory agreement, with an average absolute deviation (AAD) of 25.4%.展开更多
Computer simulation models are widely applied in various areas of the health care sector, including the spread of infectious diseases. Patch models involve explicit movements of people between distinct locations. The ...Computer simulation models are widely applied in various areas of the health care sector, including the spread of infectious diseases. Patch models involve explicit movements of people between distinct locations. The aim of the present work has been designed and explored a patch model with population mobility between different patches and between each patch and an external population. The authors considered a SIR （susceptible-infected-recovered） scheme. The model was explored by computer simulations. The results show how endemic levels are reached in all patches of the system. Furthermore, the performed explorations suggest that the people mobility between patches, the immigration from outside the system and the infection rate in each patch, are factors that may influence the dynamics of epidemics and should be considered in health policy planning.展开更多
In this paper, the standard k-ε two-equation model is adopted to numerically simulate fully developed fluid flow and heat transfer in a spiral finned tube within a cracking furnace for ethylene manufacturing. By vari...In this paper, the standard k-ε two-equation model is adopted to numerically simulate fully developed fluid flow and heat transfer in a spiral finned tube within a cracking furnace for ethylene manufacturing. By variable transformation, the original 3-D problem is converted into a 2-D problem in spiral coordinates. The algorithm of SIMPLEC is used to study the fully developed fluid flow and heat transfer in the spiral finned tube at constant periphery temperature and constant axial heat flux. The computed results agree pretty well with the experimental data obtained from the industry. Further studies on the fluid flows and temperature profiles at different Reynolds numbers within straight and spiral finned tubes are conducted and the mechanisms involved are explored. It is found that with the spiral finned tube, pressure drop increases to a great extent whereas heat transfer tends to be decreased.展开更多
Multi-dimensional heat transfers modeling is crucial for building simulations of insulated buildings,which are widely used and have multi-dimensional heat transfers characteristics.For this work,state-model-reduction ...Multi-dimensional heat transfers modeling is crucial for building simulations of insulated buildings,which are widely used and have multi-dimensional heat transfers characteristics.For this work,state-model-reduction techniques were used to develop a reduced low-order model of multi-dimensional heat transfers.With hot box experiment of hollow block wall,heat flow relative errors between experiment and low-order model predication were less than 8% and the largest errors were less than 3%.Also,frequency responses of five typical walls,each with different thermal masses or insulation modes,the low-order model and the complete model showed that the low-order model results agree very well in the lower excitation frequency band with deviations appearing only at high frequency.Furthermore,low-order model was used on intersection thermal bridge of a floor slab and exterior wall.Results show that errors between the two models are very small.This low-order model could be coupled with most existing simulation software for different thermal mass envelope analyses to make up for differences between the multi-dimensional and one-dimensional models,simultaneously simplifying simulation calculations.展开更多
The new mechanism of drum-shaped gear with ring-involute teeth is presented to implement dimensional transmission for the stairlift. The structure of the gear and rack in this actuating mechanism is designed, and then...The new mechanism of drum-shaped gear with ring-involute teeth is presented to implement dimensional transmission for the stairlift. The structure of the gear and rack in this actuating mechanism is designed, and then its inherent radius of turn and modulus selection have been studied. In order to make the mechanism move steadily, the drive guide is proposed. After using the dynamics simulation software ADAMS to analyze the 3D model, this kind of mechanism is confirmed to be able to implement dimensional track. The useful method and basis would be provided for the optimization design of the mechanism.展开更多
基金Project(06JJ30024) supported by the Natural Science Foundation of Hunan Province, ChinaProject(2004CB619206) supported by the Major State Basic Research and Development Program of China+1 种基金Project(50321402) supported by the National Science Fund for Innovative Research Groups of ChinaProject(06B052) supported by the Scientific Research Fund of Hunan Provincial Education Department of China
文摘Solute transmission in saturated ore heap was studied numerically and experimentally. The convection-diffusion equation (CDE) used to describe the mass transportation in porous media was solved by characteristic difference method to give the distribution of the concentration of ferrous ion in the ore column. To calibrate the computational model, a column test was performed using infiltration of sulfide ferrous solution (the initial concentration is c0=0.04 mol/L) on a 100 cm high column composed of ore particles smaller than 10 mm for 2.5 h. The numerical analysis shows that the results obtained from numerical modeling under the same operating conditions as used for column test are in good agreement with those from experimental procedure on the whole trend, which indicates that the model, the numerical method, and the parameters chosen can reflect the rule of ferrous ion transmission in ore heap.
基金Supported by the National Natural Science Foundation of China (20676091)the Program for New Century Excellent Talentsin University and the Program for Changjiang Scholars and Innovative Research Teams in Universities (IRT0641)
文摘Detailed investigation of flow behavior in structured packing distillation columns is of great importance in accurate prediction of process efficiency and development of more efficient and optimal equipment internals. In this study, a three-dimensional two-phase flow model based on VOF method for simulating the hydrodynamics and mass-transfer behavior in a typical representative unit of the structured packing is developed. In the proposed model, the c 2 - ε c model is used for the closure of turbulent mass transfer equation. By solving the proposed model, the velocity distribution, phase fraction profile and concentration field are obtained. Using these data, the total liquid holdup, the wetted area and the separation efficiency [height equivalent to a theoretical plate (HETP)] are estimated. For testing the model validation, the simulated HETPs are compared with our previous experimental data obtained in a 150 mm-diameter column containing Mellapak 350Y operating at the pressures of 0.6-1.8 MPa. The compari-son shows that they are in satisfactory agreement, with an average absolute deviation (AAD) of 25.4%.
文摘Computer simulation models are widely applied in various areas of the health care sector, including the spread of infectious diseases. Patch models involve explicit movements of people between distinct locations. The aim of the present work has been designed and explored a patch model with population mobility between different patches and between each patch and an external population. The authors considered a SIR （susceptible-infected-recovered） scheme. The model was explored by computer simulations. The results show how endemic levels are reached in all patches of the system. Furthermore, the performed explorations suggest that the people mobility between patches, the immigration from outside the system and the infection rate in each patch, are factors that may influence the dynamics of epidemics and should be considered in health policy planning.
文摘In this paper, the standard k-ε two-equation model is adopted to numerically simulate fully developed fluid flow and heat transfer in a spiral finned tube within a cracking furnace for ethylene manufacturing. By variable transformation, the original 3-D problem is converted into a 2-D problem in spiral coordinates. The algorithm of SIMPLEC is used to study the fully developed fluid flow and heat transfer in the spiral finned tube at constant periphery temperature and constant axial heat flux. The computed results agree pretty well with the experimental data obtained from the industry. Further studies on the fluid flows and temperature profiles at different Reynolds numbers within straight and spiral finned tubes are conducted and the mechanisms involved are explored. It is found that with the spiral finned tube, pressure drop increases to a great extent whereas heat transfer tends to be decreased.
基金Project(51178023)supported by the National Natural Science Foundation of China
文摘Multi-dimensional heat transfers modeling is crucial for building simulations of insulated buildings,which are widely used and have multi-dimensional heat transfers characteristics.For this work,state-model-reduction techniques were used to develop a reduced low-order model of multi-dimensional heat transfers.With hot box experiment of hollow block wall,heat flow relative errors between experiment and low-order model predication were less than 8% and the largest errors were less than 3%.Also,frequency responses of five typical walls,each with different thermal masses or insulation modes,the low-order model and the complete model showed that the low-order model results agree very well in the lower excitation frequency band with deviations appearing only at high frequency.Furthermore,low-order model was used on intersection thermal bridge of a floor slab and exterior wall.Results show that errors between the two models are very small.This low-order model could be coupled with most existing simulation software for different thermal mass envelope analyses to make up for differences between the multi-dimensional and one-dimensional models,simultaneously simplifying simulation calculations.
文摘The new mechanism of drum-shaped gear with ring-involute teeth is presented to implement dimensional transmission for the stairlift. The structure of the gear and rack in this actuating mechanism is designed, and then its inherent radius of turn and modulus selection have been studied. In order to make the mechanism move steadily, the drive guide is proposed. After using the dynamics simulation software ADAMS to analyze the 3D model, this kind of mechanism is confirmed to be able to implement dimensional track. The useful method and basis would be provided for the optimization design of the mechanism.
