AIM: To investigate the use of the Gaumard's Noelle S550.100 Maternal and Neonatal Simulators for teaching forceps delivery.METHODS: Twenty two(n = 22) resident physicians were enrolled in a simulation course on o...AIM: To investigate the use of the Gaumard's Noelle S550.100 Maternal and Neonatal Simulators for teaching forceps delivery.METHODS: Twenty two(n = 22) resident physicians were enrolled in a simulation course on operative forceps deliveries. The physicians enrolled in the course were all part of an accredited Obstetrics and Gynecology residency program and ranged in their training from post graduate year(PGY) 1-4. Each participant received simulation based teaching on the indications, contraindications, proper application, delivery and removal of forceps by a single teacher. The Gaumard's simulator and Simpson forceps were used for this course. Statistical analysis using SPSS statistical software was performed after the completion of the simulation training program. A paired student t-test was performed to compare the cohort's mean pretest and post simulation training scores. Follow up skills assessment scores at one month, 3 mo and 6 mo were compared to thebaseline pretest score using a paired student t-test. RESULTS: There was statistically significant improvement in the post simulation training performance evaluations compared to the pretest, 13.7(SD = 3.14) vs 7.9(SD = 4.92), P < 0.05. Scores at 1 mo, 3 mo, and 6 mo were compared to the pretest score and showed retention of skills: 4.6(SD = 5.5, 95%CI: 2.21-7.07), 4.4(SD = 5.2, 95%CI: 2.13-6.70), and 5.6(SD = 4.8, 95%CI: 3.53-7.75) points, respectively. There were statistically significant differences between residents by post graduate training year on pretest scores, however these differences were not present after simulation training. Pretest scores for PGY 1, 2, 3, 4 were 3.5(SD = 2.27, 95%CI: 2.13-5.00), 7.25(SD = 6.70, 95%CI: 1.50-13.00), 10.75(SD = 1.5, 95%CI: 9.50-12.00), 12.17(SD = 2.57, 95%CI: 10.33-14.00). After simulation training PGY 1 residents did as well as well as the upper level residents. Posttest mean test scores for PGY 1, 2, 3, 4 were 13.75(SD = 1.49, 95%CI: 12.75-14.63), 10.25(SD = 0.24, 95%CI: 4.25-14.00), 15.00(SD = 1.16, 95%CI: 14.00-16.00), 15.17(SD = 0.75, 95%CI: 14.67-15.67). CONCLUSION: Our simulation based training program not only produced short term gains, but participants were able to retain the skills learned and demonstrate their knowledge months later.展开更多
The stent was a major breakthrough in the treatment of atherosclerotic vascular disease. The permanent vascular implant of a stent, however, changes the intra-stent blood flow hemodynamics. There is a growing consensu...The stent was a major breakthrough in the treatment of atherosclerotic vascular disease. The permanent vascular implant of a stent, however, changes the intra-stent blood flow hemodynamics. There is a growing consensus that the stent implant may change the artery wall shear stress distribution and hence lead to the restenosis process. Computational fluid dynamics （CFD） has been widely used to analyze hemodynamics in stented arteries. In this paper, two CFD models （the axisymmetric model and the 3-D stent model） were developed to investigate the effects of strut geometry and blood rheology on the intra-stent hemodynamics. The velocity profile, flow recirculation, and wall shear stress distribution of various stent strut geometries were studied. Results show strong correlations between the intra-stent hemodynamics and strut geometry. The intra-stent blood flow is very sensitive to the strut height and fillet size. A round strut with a large fillet size shows 36% and 34% reductions in key parameters evaluating the restenosis risk for the axisymmetric model and the 3-D stent model, respectively. This suggests that electrochemical polishing, a surface-improving process during stent manufacturing, strongly influences the hemodynamic behavior in stented arteries and should be controlled precisely in order to achieve the best clinical outcome. Rheological effects on the wall shear stress are minor in both axisymmetric and 3-D stent models for the vessel diameter of 4 mm, with Newtonian flow simulation tending to give more conservative estimates ofrestenosis risk. Therefore, it is reasonable to simulate the blood flow as a Newtonian flow in stented arteries using the simpler axisymmetric model. These findings will provide great insights for stent design optimization for potential restenosis improvement.展开更多
文摘AIM: To investigate the use of the Gaumard's Noelle S550.100 Maternal and Neonatal Simulators for teaching forceps delivery.METHODS: Twenty two(n = 22) resident physicians were enrolled in a simulation course on operative forceps deliveries. The physicians enrolled in the course were all part of an accredited Obstetrics and Gynecology residency program and ranged in their training from post graduate year(PGY) 1-4. Each participant received simulation based teaching on the indications, contraindications, proper application, delivery and removal of forceps by a single teacher. The Gaumard's simulator and Simpson forceps were used for this course. Statistical analysis using SPSS statistical software was performed after the completion of the simulation training program. A paired student t-test was performed to compare the cohort's mean pretest and post simulation training scores. Follow up skills assessment scores at one month, 3 mo and 6 mo were compared to thebaseline pretest score using a paired student t-test. RESULTS: There was statistically significant improvement in the post simulation training performance evaluations compared to the pretest, 13.7(SD = 3.14) vs 7.9(SD = 4.92), P < 0.05. Scores at 1 mo, 3 mo, and 6 mo were compared to the pretest score and showed retention of skills: 4.6(SD = 5.5, 95%CI: 2.21-7.07), 4.4(SD = 5.2, 95%CI: 2.13-6.70), and 5.6(SD = 4.8, 95%CI: 3.53-7.75) points, respectively. There were statistically significant differences between residents by post graduate training year on pretest scores, however these differences were not present after simulation training. Pretest scores for PGY 1, 2, 3, 4 were 3.5(SD = 2.27, 95%CI: 2.13-5.00), 7.25(SD = 6.70, 95%CI: 1.50-13.00), 10.75(SD = 1.5, 95%CI: 9.50-12.00), 12.17(SD = 2.57, 95%CI: 10.33-14.00). After simulation training PGY 1 residents did as well as well as the upper level residents. Posttest mean test scores for PGY 1, 2, 3, 4 were 13.75(SD = 1.49, 95%CI: 12.75-14.63), 10.25(SD = 0.24, 95%CI: 4.25-14.00), 15.00(SD = 1.16, 95%CI: 14.00-16.00), 15.17(SD = 0.75, 95%CI: 14.67-15.67). CONCLUSION: Our simulation based training program not only produced short term gains, but participants were able to retain the skills learned and demonstrate their knowledge months later.
文摘The stent was a major breakthrough in the treatment of atherosclerotic vascular disease. The permanent vascular implant of a stent, however, changes the intra-stent blood flow hemodynamics. There is a growing consensus that the stent implant may change the artery wall shear stress distribution and hence lead to the restenosis process. Computational fluid dynamics （CFD） has been widely used to analyze hemodynamics in stented arteries. In this paper, two CFD models （the axisymmetric model and the 3-D stent model） were developed to investigate the effects of strut geometry and blood rheology on the intra-stent hemodynamics. The velocity profile, flow recirculation, and wall shear stress distribution of various stent strut geometries were studied. Results show strong correlations between the intra-stent hemodynamics and strut geometry. The intra-stent blood flow is very sensitive to the strut height and fillet size. A round strut with a large fillet size shows 36% and 34% reductions in key parameters evaluating the restenosis risk for the axisymmetric model and the 3-D stent model, respectively. This suggests that electrochemical polishing, a surface-improving process during stent manufacturing, strongly influences the hemodynamic behavior in stented arteries and should be controlled precisely in order to achieve the best clinical outcome. Rheological effects on the wall shear stress are minor in both axisymmetric and 3-D stent models for the vessel diameter of 4 mm, with Newtonian flow simulation tending to give more conservative estimates ofrestenosis risk. Therefore, it is reasonable to simulate the blood flow as a Newtonian flow in stented arteries using the simpler axisymmetric model. These findings will provide great insights for stent design optimization for potential restenosis improvement.
