期刊文献+
共找到10篇文章
< 1 >
每页显示 20 50 100
波浪模拟标定系统的设计 被引量:1
1
作者 李选群 范秀涛 +2 位作者 张继明 万晓正 李文庆 《山东科学》 CAS 2015年第4期1-7,共7页
基于重力加速度式波浪传感器的工作原理,设计了一套波高在0.5~9m范围可调、周期在2~40s连续可调的波浪模拟标定系统。系统根据正弦波浪理论,将波浪传感器安装在可做匀速转动的一圆形桁架上,波浪传感器的运动轨迹可看做正弦运动,... 基于重力加速度式波浪传感器的工作原理,设计了一套波高在0.5~9m范围可调、周期在2~40s连续可调的波浪模拟标定系统。系统根据正弦波浪理论,将波浪传感器安装在可做匀速转动的一圆形桁架上,波浪传感器的运动轨迹可看做正弦运动,以此进行模拟标定,再由控制系统控制波浪传感器的旋转半径和桁架的转动周期,从而实现对波高和波周期的模拟和标定。最后通过有限元对桁架的整体结构强度和刚度进行分析,并在理论上对系统的模拟标定精度作出分析,得到渡高精确度为±2mm,周期精确度为±0.1s,达到设计和使用要求。 展开更多
关键词 波浪 模拟标定 桁架 ANSYS
下载PDF
AT89C2051在数控波浪模拟标定装置中的应用 被引量:1
2
作者 吕富强 綦声波 +2 位作者 朱洪海 于 锋 惠 力 《微计算机信息》 2002年第8期40-41,60,共3页
本文介绍了一种基于AT89C2051单片机的周期测量电路在数控波浪模拟标定装置中的应用。本电路结构简单,可靠性强.具有极好的通用性,应用领域广泛。
关键词 AT89C2051 数控波浪模拟标定装置 单片机 测波传感器
下载PDF
非均匀残余应力释放系数矩阵的模拟标定法及误差分析
3
作者 薛满泉 梁校 《中国水运(下半月)》 2017年第7期97-100,共4页
小孔法测定残余应力越来越广泛地在各行业中使用,但是对于沿深度方向上的非均匀残余应力释放系数的研究,目前还比较的少。基于积分法原理,采用了逐层钻孔和分层加载的方法,通过有限元仿真软件ANSYS模拟标定出了非均匀应力情况下的释放... 小孔法测定残余应力越来越广泛地在各行业中使用,但是对于沿深度方向上的非均匀残余应力释放系数的研究,目前还比较的少。基于积分法原理,采用了逐层钻孔和分层加载的方法,通过有限元仿真软件ANSYS模拟标定出了非均匀应力情况下的释放系数矩阵,并对其进行了验证,结果证明本文采用的有限元模拟标定法具有较好的精度和实用性。 展开更多
关键词 非均匀残余应力 释放系数 有限元仿真 模拟标定
下载PDF
基于串口服务器的模拟量自动标定系统设计
4
作者 徐自衡 蒋远大 +1 位作者 于强 耿宝明 《电子设计工程》 2016年第11期42-45,48,共5页
针对卫星载荷控制器的多通道模拟量信号标定的复杂性与远距离操作成本等问题,本文提出了一种基于串口服务器的控制器模拟量自动标定系统。实验结果表明,该标定系统能够按照设计标定流程自动执行,通过数据注入,可以实现自动标定流程的实... 针对卫星载荷控制器的多通道模拟量信号标定的复杂性与远距离操作成本等问题,本文提出了一种基于串口服务器的控制器模拟量自动标定系统。实验结果表明,该标定系统能够按照设计标定流程自动执行,通过数据注入,可以实现自动标定流程的实时修改。利用上位机软件实时采集待标定信号,通过最小二乘算法自动计算出控制器数字量与实际输入电压模拟信号的线性拟合系数—K、B系数。并结合实际输入信号对标定后的计算结果进行精度校验,控制标定相对误差不超过1%。 展开更多
关键词 串口服务器 数据注入 模拟标定 最小二乘算法
下载PDF
智能化共轨测试平台研究
5
作者 任立童 王洪荣 王永富 《装备制造技术》 2010年第9期1-3,9,共4页
为满足高压共轨电控系统的开发测试、模拟匹配标定的需求,设计了智能化共轨测试平台,承接了原油泵试验台的所有功能,并新增燃油温控系统、智能油量测量系统、模拟标定装置、智能采集显示及控制等模块。模拟标定装置,可模拟共轨电控系统... 为满足高压共轨电控系统的开发测试、模拟匹配标定的需求,设计了智能化共轨测试平台,承接了原油泵试验台的所有功能,并新增燃油温控系统、智能油量测量系统、模拟标定装置、智能采集显示及控制等模块。模拟标定装置,可模拟共轨电控系统的传感器和执行器,结合高精度轨压测量和油量测量系统,可实现电控系统开发过程的模拟发动机实际运行工况测试、基础MAP标定、极端运行工况试验等功能,有效减少了试验开发成本,提高了开发效率。 展开更多
关键词 试验台 模拟标定装置 智能化 模拟标定
下载PDF
Self-calibration Applied in Converting Simulation Surveying
6
作者 WANG Ren ZHU Xinhui 《Geo-Spatial Information Science》 2007年第1期57-60,共4页
In the field of converting simulation surveying and traditional close range photogrammetry, it has been developed so far to survey objects by commercial digital camera and this technique is applied widely in every par... In the field of converting simulation surveying and traditional close range photogrammetry, it has been developed so far to survey objects by commercial digital camera and this technique is applied widely in every part of production. In order to get three-dimensional information of objects, commercial digital camera must be examined. For a long time, digital camera has been examined by DLT. Then there must be a high-precision control field. For realizing surveying without control points, a method for self-calibration is proposed. 展开更多
关键词 absolute conic absolute quadric SELF-CALIBRATION
下载PDF
Drug-Drug Interaction Studies of Levocetirizine with Atenolol
7
作者 Shafaque Mehboob Muhammad Azhar Mughal +3 位作者 Khalid Aftab MoonaMehboob Khan Najma Sultana Syed Arayne 《Journal of Pharmacy and Pharmacology》 2017年第3期118-124,共7页
The objective of the study was to evaluate the drug-drug interaction studies of levoceterizine with atenolol. Calibration curve studies of working standard solutions of levocetirizine and atenolol (0.01-0.1 mmol) we... The objective of the study was to evaluate the drug-drug interaction studies of levoceterizine with atenolol. Calibration curve studies of working standard solutions of levocetirizine and atenolol (0.01-0.1 mmol) were scanned. Maxima appeared at 231 nm for levocetirizine and 224 nm for atenolol. The calibration curve obeyed Beer Lambert's Law. Lone availabilities of both the drugs were studied in pH 1, pH 4, pH 7.4 and pH 9 at 37℃ on B.P. (British Pharmacopoeia) dissolution apparatus. To study the drug-drug interaction of levocetirizine (5 mg tablet) and atenolol (100 mg tablet), both the drugs were introduced to the dissolution apparatus in simulated gastric juice (pH 1), pH 4, pH 7.4 and pH 9 at 37℃ at zero time and measured the absorbance maxima of both the drugs at the corresponding wavelength. Graphs were plotted for availability percentage (%) of drug versus time at each set of experiment. The availability percentage (%) of levocetirizine in the buffers of pH simulated to gastric pH 4, pH 7.4 and pH 9 in the presence of atenolol was 436.78%, 376.90%, 436.78% and 436.78%, respectively, but the availability of atenolol was increased up to 214.80%, 212.96%, 214.93% and 231.51% in simulated to gastric pH and in the buffers ofpH 4, pH 7.4 and pH 9, respectively. On the basis of these studies, it is concluded that levocetirizine forms a charge-complex with atenolol; therefore, co-administration of these drugs should be avoided. 展开更多
关键词 LEVOCETIRIZINE ATENOLOL drug-drug interactions absorbance maxima.
下载PDF
Comparison between Google Earth KML Data and RTK Data on a Flight Planning Simulated to the Unmanned Aerial Vehicle Microdrone MD4-1000
8
作者 Antoninho Joao Pegoraro Marcelo Costa Napoleao Jurgen Wilhelm Philips 《Journal of Earth Science and Engineering》 2012年第10期613-616,共4页
The UAVs (unmanned aerial vehicles) and the use of graphical data files of extension KML (keyhole markup language) have become popular nowadays. The KML files are associated to the Google Earth applications. Devel... The UAVs (unmanned aerial vehicles) and the use of graphical data files of extension KML (keyhole markup language) have become popular nowadays. The KML files are associated to the Google Earth applications. Developed by Microdrone company for planning, overflight simulation and data flight analysis, the program mdCockpit was used in this experiment. The UAV Microdrone's flight path was programmed in two ways: using geo referenced images from Google Earth and entering points coordinates into the program. These points have had their geographical decimal coordinates collected by GPS (global positioning system) (RTK (real time kinematic)) method. The aim here is to describe a way of evaluating the difference between the alternatives of flight planning. A flight path, defined a route with 22 points, was also simulated in the program mdCockpit. The points were collected and saved, while the images captured by the program went automatically forming a georeferenced mosaic. A comparison between the differences of coordinates to each point was made by choosing on the images and also by a RTK positioning. The result was up to 14.20 m to a 100 m flight height. There is a significant change of position and this can result in unwanted over flights in locations or even jeopardizing the safety of air activity. 展开更多
关键词 Simulation of flight path MD4-1000 KML data RTK data.
下载PDF
单重态氧发生器出口气流中O_2(~1Δ)及水汽绝对浓度的测量 被引量:5
9
作者 王增强 多丽萍 桑风亭 《光学学报》 EI CAS CSCD 北大核心 2004年第5期683-686,共4页
单重态氧发生器是氧碘化学激光器的核心部件 ,O2 (1Δ)和水汽的粒子数密度 (绝对浓度 )是单重态氧发生器的两个重要参量 ,其中O2 (1Δ)是氧碘化学激光器的能源 ,而水汽对氧碘化学激光器的发光介质—I 有强烈的淬灭作用。如何简单准确地... 单重态氧发生器是氧碘化学激光器的核心部件 ,O2 (1Δ)和水汽的粒子数密度 (绝对浓度 )是单重态氧发生器的两个重要参量 ,其中O2 (1Δ)是氧碘化学激光器的能源 ,而水汽对氧碘化学激光器的发光介质—I 有强烈的淬灭作用。如何简单准确地测量这两个参量 ,一直是氧碘化学激光器研究中的一个难题。利用体光源模拟标定法 ,得到了O2 (1Δ)和水汽的绝对浓度 ,并且成功地用一套实验装置对射流式单重态氧发生器的上述两个参量进行了实时测量 ,得到了两个参量的变化曲线 ,同时还提供了O2 (1Δ)的产率以及水汽体积浓度等参量的变化曲线 ,通过大量实验结果 ,给出了各参量的变化规律 ,为射流式单重态氧发生器研究提供了有力的参考依据。 展开更多
关键词 光学测量 氧碘化学激光器 单重态氧发生器 绝对浓度 体光源模拟标定
原文传递
Focusing with the decomposition of the time reversal operator method in noisy environments 被引量:1
10
作者 Chun-xiao LI Jian-long LI +1 位作者 Xian-yi GONG Ming-fei GUO 《Journal of Zhejiang University-Science A(Applied Physics & Engineering)》 SCIE EI CAS CSCD 2009年第7期997-1008,共12页
This paper presents a detailed analysis of the effects of noise (reverberation) on the focusing performance of de-composition of the time reversal operator (DORT) in a noise-limited case and in a reverberation-limited... This paper presents a detailed analysis of the effects of noise (reverberation) on the focusing performance of de-composition of the time reversal operator (DORT) in a noise-limited case and in a reverberation-limited case, respectively. Quantitative results obtained from simulations and experiments are presented. The results show the DORT method can be effi-ciently applied to target detection with enough source level to yield significant backscatter. For a target placed on the bottom, the influence of the reverberation on the focusing performance is slight. However, distinguishing between a target and constant backscattering returning from strong local clutter on the bottom (false alarms) needs further research. 展开更多
关键词 Decomposition of the time reversal operator (DORT) Time reversal mirror Retrofocusing performance
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部