金属矿地震勘探物理模拟实验技术

在金属矿地震勘探的物理模拟中,实验技术研究是得到可靠实验结果的重要保证。通过控制环氧基混合材料混合比的实验,形成1600～3200m/s的速度差异,实现了对复杂岩性的模拟。在对山地模型的采集中,采用触点控制方式实现了高程测量和数据采集同步进行。采用页面模型模拟技术,实现了对复杂模型地震波总场信号的分解和归位。

中国农业气象信息技术的发展趋势

以信息技术是农业气象信息技术现代化建设的推动力的观点 ,系统分析了国内外近年农业气象信息技术的建设发展与应用现状及其存在的主要问题 ,结合国情提出了 2

Application of the Nutrient Cycling Model NuCM to a Forest Monitoring Site Exposed to Acidic Precipitation in China

The nutrient cycling model NuCM is one of the most detailed models for simulating processes that influence nutrient cycling in forest ecosystems. A field study was conducted at Tieshanping, a Masson pine (Pinus massoniana Lamb.) forest site, in Chongqing, China, to monitor the impacts of acidic precipitation on nutrient cycling. NuCM simulations were compared with observed data from the study site. The model produced an approximate fit with the observed data. It simulated the mean annual soil solution concentrations in the two simulation years, whereas it sometimes failed to reproduce seasonal variation. Even though some of the parameters required by model running were measured in the field, some others were still highly uncertain and the uncertainties were analyzed. Some of the uncertain parameters necessary for model running should be measured and calibrated to produce a better fit between modeled results and field data.

Dynamic Modeling and Simulation of a Commercial Naphtha Catalytic Reforming Process

A first principles-based dynamic model for a continuous catalyst regeneration (CCR) platforming process, the UOP commercial naphtha catalytic reforming process, is developed in this paper. The lumping details of the naphtha feed and reaction scheme of the reaction model are given. The process model is composed of the reforming reaction model with catalyst deactivation, the furnace model and the separator model, which is capable of capturing the major dynamics that occurs in this process system. Dynamic simulations are performed based on Gear numerical algorithm and method of lines (MOL), a numerical technique dealing with partial differential equations (PDEs). The results of simulation are also presented. Dynamic responses caused by disturbances in the process system can be correctly predicted through simulations.

Application of preblasting to high-section top coal caving for steepthick coal sea

For mining extra-steep-thick coal seam, the sublevel top coal caving is a high efficient method in practical engineering. However, major challenges associated with mining high-section top-coal-caving （HSTCC） are related to the resulting high ground stresses. Inevitability, using the high-section sublevel top coal caving for extra-steep-thick coal seam, the large scale of mined-out area appears. If the prefracture blasting and hydraulic fracture techniques are utilized, the top coal damage and cracks will develop, and the mining complexity will increase, such as seam inclination, continuity, mechanical characteristics of roof and susceptibility of top coal, etc. First, the field conditions of B1＋2 seam were investigated at the ＋588 level of the Weihuliang Underground Mine of China. Subsequently, according to caving mechanism of strata response obtained from several special models including physical simulation tests and numerical simulation models, the prefracture process including blasting and injecting water were analyzed. Then, the prefracture blasting technique was successfully applied to the caving of 52 m-sublevel seam. Finally, the effects were verified by advanced detecting instruments, and the results show these methods and measurements are feasible and valid.

Application of simple array method in one-way traffic synthetic asessment

One-Way Traffic synthetic assessing can not only determine the assessment method, but can also provide an opportunity for further study of road systems. Comparing three Road Traffic Planning methods, which are Value Analysis method, Simple Array method and Step Analysis method, this paper concludes that Simple Array method has one prominent merit, avoiding the complicated relationship of various factors and simplifying the complex problem. Therefore Simple Array method is firstly presented in this paper to be the assessing measure to assess the One-Way Traffic Planning project. Although this assessing method cannot wholly give way to man’s will, through consistently testing on qualitative factors and with the decision-making results of a multi-program, this method is still an effective method. Using an example of Harbin One-Way Traffic planning, with seven assessing indexes including economic benefit index, Simple Array method is applied to synthetically assessing the program. This fully reflects the general function of One-Way Traffic planning program and objectively evaluates the program. It also proves that, as the method of One-Way Traffic synthetic assessing, Simple Array method is rational and practical.

Effect of pile-cap connection on behavior of torsionally loaded pile groups

To evaluate the responses of fixed and pinned pile groups under torsion, a method is presented to analyze the nonlinear behavior of free-standing pile groups with rigid pile caps. The method is capable of simulating the nonlinear soil response in the near field usingp-y and r-θ curves, the far-field interactions through Mindlin＇s and Randolph＇s elastic solutions, and the coupling effect of lateral resistance on torsional resistance of the individual piles using an empirical factor. Based on comparisons of the solutions for fixed- and pinned-head, 1×2, 2×2, and 3×3 pile groups subjected to torsion, it was found that pile-cap connection significantly influences the torsional capacity of pile groups and the assignment of applied torques in the pile groups. In this study, the applied torques for the pinned-head pile groups are only 44%-64% of those for the corresponding fixed-head pile groups at a twist angle of 2^o. Such a difference is mainly due to the change of the lateral resistances of individual piles in the groups.

Shortcut Algorithm for Simulation of Batch Extractive Distillation

The batch extractive distillation (BED) process has the advantages of both batch and extractive distillation. It is one of the most promising means for the separation of azeotropic and close-boiling point systems. However, so far this process has not been applied in industry due to its over-complexity. A new shortcut model was proposed to simulate the operation of the batch extractive distillation operations. This algorithm is based on the assumption that the batch extractive distillation column can be considered as a continuous extractive distillation column with changing feed at any time. Namely, the whole batch process is simulated as a succession of a finite number of steady states of short duration, in which holdup is considered as constant mole. For each period of time the batch extractive distillation process is solved through the algorithm for continuous extractive distillation. Finally, the practical implementation of the shortcut model is discussed and data from the laboratory and literature are presented. It is found that this model has better adaptability, more satisfactory accuracy and less calculative load than previous rigorous model. Hence the algorithm for simulating BED is verified.

Modeling and designing for ship steering integrated simulator

The modeling of a ship steering integrated simulator(SSIS)applied to the design,debugging and maintenance of an autopilot is discussed.A nonlinear responsive model is proposed and applied to the design of SSIS.The SSIS generates real signals of the ship heading,the rudder angle,the ship position and the output to the autopilot.A variety of factors,such as ship speed variety,shallow water effect,nonlinearity of yaw and actuator,and environmental disturbances like wind,wave and current are considered carefully.Detailed formulas for calculating relevant parameters are provided.Taken a naval ship as an example,the physical-digital simulations on SSIS and the digital simulation on a Marine System Simulator(MSS)were conducted separately in various sailing conditions.Simulation results show that the simple nonlinear responsive model can be applied to ship motion control and simulation with sufficient accuracy and effectiveness.

Simulation and Scale-up of Barium Sulphate Precipitation Process Using CFD Modeling

Some empirical mixing models were used to describe the imperfect mixing in precipitation process. However, the models can not, in general, reflect the details of interactions between mixing and crystallization in a vessel. In this study, CFD (computational fluid dynamics) technique were developed by simulating the precipitation of barium sulphate in stirred tanks by integration of population balance equations with a CFD solver. Two typical impellers, Rushton and pitched blade turbines, were employed for agitation. The influence of feed concentration and position on crystal product properties was investigated by CFD simulation. The scale-up of these precipitators was systematically studied. Significant effect on the crystal properties was found for the scale-up under some conditions.

A new relative efficiency in parameter estimation for linear model

A new relative efficiency of parameter estimation for generalized Gauss-Markov linear model was proposed. Its lower bound was also derived. Its properties were explored in comparison with three currently very popular relative efficiencies. The new relative efficiency not only reflects sensitively the error and loss caused by the substitution of the least square estimator for the best linear unbiased estimator, but also overcomes the disadvantage of weak dependence on the design matrix.

Modeling of 3D-structure for regular fragments of low similarity unknown structure proteins

Because it is hard to search similar structure for low similarity unknown structure proteins directly from the Protein Data Bank （PDB） database, 3D-structure is modeled in this paper for secondary structure regular fragments （α-Helices, β-Strands） of such proteins by the protein secondary structure prediction software, the Basic Local Alignment Search Tool （BLAST） and the side chain construction software SCWRL3. First, the protein secondary structure prediction software is adopted to extract secondary structure fragments from the unknown structure proteins. Then, regular fragments are regulated by BLAST based on comparative modeling, providing main chain configurations. Finally, SCWRL3 is applied to assemble side chains for regular fragments, so that 3D-structure of regular fragments of low similarity unknown structure protein is obtained. Regular fragments of several neurotoxins are used for test. Simulation results show that the prediction errors are less than 0.06nm for regular fragments less than 10 amino acids, implying the simpleness and effectiveness of the proposed method.

Full Scale Explosive Tests in Woomera, Australia

Two large explosion trials (5 000 kg TNT and 500 kg ANFO) were conducted in Woomera, Australia in April/May 2006. Advance Protective Technologies for Engineering Structures (APTES) group tested 2 large single-storey concrete modules with individual components such as doors, windows and tiled panels. A description of the trial and details of various modules tested in these trials are presented in the paper. Numerical modelling and simulations are performed using computer programs, CONWEP, AIR3D and AUTODYN. A comparison of the pressure time histories obtained using these codes is made along with the concluding remarks.

钢结构幕墙一体化在设计施工联动中的融合与实践

根据工程特征和建造需求,创新应用基于BIM的“模型及模拟技术”对钢结构幕墙系统工程的深化设计准确性、加工制作精度、现场施工效率等进行高效一体化管控,实现资源的最优集成、前后道工序的无缝衔接。钢结构幕墙一体化和设计施工一体化的联动与融合能够凸显设计与施工各自的优势特征,提升建筑结构的外在与内涵,实现了设计与施工的并行开展、钢结构与幕墙的高精度衔接,压缩了施工周期,提升了建造效率,并成功建造了首届进博会场馆功能提升工程,可为今后大型复杂钢结构幕墙工程的建造技术、建筑功能提升更新技术的发展提供借鉴。

Application of the Moving Averaging Technique in Surplus Production Models

Surplus production models are the simplest analytical methods effective for fish stock assessment and fisheries management. In this paper, eight surplus production estimators(three estimation procedures) were tested on Schaefer and Fox type simulated data in three simulated fisheries(declining, well-managed, and restoring fisheries) at two white noise levels. Monte Carlo simulation was conducted to verify the utility of moving averaging(MA), which was an important technique for reducing the effect of noise in data in these models. The relative estimation error(REE) of maximum sustainable yield(MSY) was used as an indicator for the analysis, and one-way ANOVA was applied to test the significance of the REE calculated at four levels of MA. Simulation results suggested that increasing the value of MA could significantly improve the performance of the surplus production model(low REE) in all cases when the white noise level was low(coefficient of variation(CV) = 0.02). However, when the white noise level increased(CV= 0.25), adding the value of MA could still significantly enhance the performance of most models. Our results indicated that the best model performance occurred frequently when MA was equal to 3; however, some exceptions were observed when MA was higher.

The Study of a New Manipulator for a Stone Protector of Stony Soil Tillage Implement

This paper studies the motion of novel manipulator that can be used in the structure of stone protectors of soil tillage implements. According to the virtual reality technology-based method the technology of composition of the virtual model of a manipulator and its positions in the working process are described in details. This virtual model is used for composition the video clip, simulating the motion of novel manipulator, which three points are moving along two lines and one curve. The results obtained and the computer program realizing the virtual reality technology-based study of the working process of the virtual manipulators for stone protectors can be used by designers of stone protectors for soil tillage implements.

Multi-wave forward modeling of a reservoir and AVO analysis

In the process of accurate interpretation of multi-wave seismic data,we wanted to solve the problem of multi-wave information recognition.Based on techniques of elastic wave forwarding,targeting the geological model of a reservoir of an oil field exploration area,we used a high-order staggered-grid difference technology to simulate many shots of seismic records of nonzero offset shots,implemented multi-wave seismic data processing to acquire the CMP of P waves and converted waves,NMO traces of CCP pre stacks,including AVA information and superposition profiles.Based on the AVA calculation of the model,the layer parameters of the model and the forwarding wave field relations of the P-S wave,we also compared and studied the correspondence between P waves and converted waves.The results of our analysis show that the results from simulation and from the AVO analysis are consistent.Significant wave field differences between P waves and converted waves in the same reservoir were found,which are helpful in recognizing and interpreting the multi-wave information in this area.We made use of the multi-wave data to provide the important guidelines for reservoir prediction.

Preliminary Study on Simulation of Global Seismic Activities with Global Strain Rate

The relationship between the strain rate field observed by GPS and global distribution of strong earthquakes is analyzed in this work. How do we recognize the characteristics of global seismic activities with space observation technology? A preliminary model of Cellular Automata that could simulate the global seismic activities both in time and space has been established based on the results of global strain rate field provided by the GSRM Program. The grid of the model is evenly divided,which is consistent with that of GSRM.The status of each cell is its strain state,and is adjusted according to the evolution rules.Maximum shear strain criterion is adopted in the evolution of the Cellular Automata. The threshold for cells in surface expansion is 80% of that for those in compression. The preliminary model could in general simulate the main characteristics of the distribution of the global seismic activities. It could exhibit in general the global distribution of weak and active tectonic activities. Although the preliminary Cellular Automata model needs to be improved in many aspects,the result suggests the possibility of modeling the general features of rather complicated global seismic activities based on the strain rates obtained by GPS and other observations.

Electric Energy Management Modeling for Kingdom of Bahrain

In the deregulated economy, the maximum load forecasting is important for the electric industry. Many applications are included such as the energy generation and purchasing. The aim of the present study is to find the most suitable models for the peak load of the Kingdom of Bahrain. Many mathematical methods have been developing for maximum load forecasting. In the present paper, the modeling of the maximum load, population and GDP （gross domestic product） versus years obtained. The curve fitting technique used to find that models, where Graph 4.4.2 as a tool used to find the models. As well, Neuro-Fuzzy used to find the three models. Therefore, three techniques are used. These three are exponential, linear modeling and Neuro-Fuzzy. It is found that, the Neuro-Fuzzy is the most suitable and realistic one. Then, the linear modeling is the next suitable one.